GE JT1000DF Specification

JT1000DF
F
E
22
"
Conduit
40"
Cutout depth 23-1/2" MIN
B
A
C
Cutout width 28-1/2" MIN.
28-5/8" MAX.
Recommended cutout location
from oor
32-1/2"
Cutout height 27-1/4" MIN. 27-5/16" MAX.
23" minimum door opening allowance
22" to bottom of junction box
Junction box location
9-1/2"
MAX.
D
F
E
22
"
Conduit
40"
Cutout depth 23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1" B – Overlap of oven over side of edges of cutout 3/4" C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2" E – Overall height with trim 28-5/8" F – Overall width 29-3/4"
PT7050 JT5000 JT3000 JT1000
B
30''
A
C
Cutout width 28-1/2" MIN.
28-5/8" MAX.
Recommended cutout location
from oor
32-1/2"
Cutout height 27-1/4" MIN. 27-5/16" MAX.
23" minimum door opening allowance
22" to bottom of junction box
Junction box location
9-1/2"
MAX.
D
Cutout depth 23-1/2" MIN
PT7050 JT5000 JT3000 JT1000
B
30''
A
C
Cutout width 28-1/2" MIN.
28-5/8" MAX.
Recommended cutout location
from oor
32-1/2"
Cutout height 27-1/4" MIN. 27-5/16" MAX.
22" to bottom of junction box
Junction box location
MAX.
B
30''
A
C
Cutout width 28-1/2" MIN.
28-5/8" MAX.
Recommended cutout location
from oor
32-1/2"
Cutout height 27-1/4" MIN. 27-5/16" MAX.
2-1/2" MIN
INSTALLATION ABOVE A WALL OVEN
GE® 30" Built-In Single Wall Oven
DIMENSIONS AND INSTALLATION INFORMATION
MOST 30" WALL CABINETS CAN BE USED WITH THIS UNIT.
NOTE: These ovens are not approved for
stackable installations. Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
INSTA L L ATION IN FO R MATION : Before installing, consult installation instructions packed with product for current dimensional data.
Side-by-side installations require at least 2" between cutouts.
KW RATING
240V 4.2
208V 3.2
BREAKER SIZE
240V 20 Amps
208V 20 Amps
Cabinet 30"
A – Overlap of oven at top of cutout 1" B – Overlap of oven over side of edges of cutout 3/4" C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2" E – Overall height with trim 28-5/8" F – Overall width 29-3/4"
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
JT1000
Dimension and installation information are shown in inches.
INSTALLATION BELOW A COOKTOP
From front edge
of countertop to front
edge of cooktop cutout
31-1/4" MIN
From top surface
of countertop to
top surface of
wall oven support
platform
Suitable
bracing
to support
runners
C
L
(must support 200 lbs.)
ADA
COMPLIANT
2 x 4 or equivalent runners level with bottom of cutout
and ush with sides of cutout or solid bottom oor.
Listed by Underwriters Laboratories
Speci fication Revise d 9/18
JT1000DF
GE® 30" Built-In Single Wall Oven
OPTIONAL UNDERCOUNTER DIMENSIONS AND INSTALLATION INFORMATION
NOTE: 36" ribbon cooktop are approved for use over GE 30" single wall ovens and warming drawers. 30" ribbon cooktops are approved for use over 30" and GE 27" single wall ovens and warming drawers. Refer to cooktop and wall oven installation information packed with products for current dimensional data.
NOTE: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
INSTA L L ATION IN FO R MATION : Before installing, consult installation instructions packed with products for current dimensional data and for alternate installation options.
ELECTRIC WALL OVENS ARE NOT APPROVED FOR INSTALLATION WITH A PLUG AND RECEPTACLE. THEY MUST BE HARD WIRED IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS.
WITH GAS COOKTOP
WITH ELECTRIC COOKTOP
1-1/2" Typical countertop
1-1/2" MIN.
Free space
31-1/4"
MIN.
4" to
4-1/2"
Add suitable filler to match
adjacent cabinets when needed
to maintain toe kick alignment
Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
27-1/4" MIN.
27-5/16" MAX.
Cutout height
Side View
3/4" Support
Power cord
Junction box(s) for
oven & radiant
cooktop 22"
from floor
of cutout
36" Typical Countertop height
22"
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Dimension and installation information are shown in inches.
Listed by
ADA
COMPLIANT
Underwriters Laboratories
Speci fication Revise d 9/18
Loading...
+ 1 hidden pages