GE JSP56WD, JSP56CD, JSP56BD Specification

JSP56WD/CD/BD—GE Profile™ 30" Slide-In Electric Range

Counter Installation (in inches)

31-1/4"

	2-7/8"
	Front	Surface
To
Of	Countertop

	20-5/8"
		ClearanceSurface
Door		Front
	Countertop
From
of

KW Rating

240V 12.0

208V 9.0

Breaker Size

240V 40 Amps†

208V 40 Amps†

† Note: Check local codes for required breaker size

Cooktop Dimensions (in inches)

	30" Min.
6"	Min.
From Walls

		30" Min.
23		-3/16"
27	-1/4"
27
36"
		2-
		1/2"
		30"

Acceptable Electrical

Outlet Area Also

In Adjacent Cabinet

Or Under Floor

Shave Raised Edge To Clear

31-1/8" Wide Control Panel

9/16"
13"	Max	.	18" Min.
	Max


	25"
7-1/2"
2-
1/2"

If you are NOT using the optional Filler or Backguard:

23-3/16"

30" Smooth Cut

If you are using the optional Filler or Backguard:

25"

30" Smooth Cut

Specification Created 1/01

Note: Cabinets installed adjacent to slide-in electric ranges must have an adhesion spec of at least 194°F temperature rating.

Note: All 30" Slide-In Ranges conform to U.L. requirements for 0" spacing from range to adjacent walls below countertop. To reduce possibility of scorching the side walls above the countertop when no load is present on burners, it is recommended that a minimum 6" spacing from adjacent side wall be allowed for possible extended high-heat element operation.

Receptacle Locations: For all 30" Slide-In Ranges locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall.

Optional Kits for Slide-In Electric Ranges (Models JS966, JSP56 and JSP46)

(Available At Additional Cost)

Maintop Filler

(Fills gap between cooktop and wall when unit is installed in 30" free-standing cutout) JXS66WW—White JXS66CC—Bisque JXS66BB—Black

Accessory Backguards

(Attaches to the back of range as a backguard when unit is installed in 30" free-standing cutout) JXS39SS—Stainless JXS36WW—White JXS36CC—Bisque JXS36BB—Black

Body Sides

(Slide-in ranges are sold without sides installed. Can be installed on either left or right when unit has one exposed side [no cabinet adjacent]. Kit contains 1 body side) JXS76WW—White JXS76CC—Bisque JXS76BB—Black

Vertical Side Trim Kits

(If cabinet cutout width is more than 30", a vertical side trim kit may be used to close the gap between the range and cabinet) JXS86WW—White JXS86CC—Bisque JXS86BB—Black

Lower Trim Kits

(If counter height is greater than 36.5", a lower trim kit is recommended to extend the useful height to 38" maximum) JXS56WW—White JXS56CC—Bisque JXS56BB—Black

For answers to your Monogram,® GE Profile™ or		All GE ranges are equipped with
GE appliance questions, visit our website at		an Anti-Tip device. The installation
GEAppliances.com or call		of this device is an important,
		required step in the installation
		required step in the installation
GE Answer Center® service, 800.626.2000.		of the range.

JSP56WD/CD/BD—GE Profile™ 30" Slide-In Electric Range

8	6	1
	4	2
	<![if ! IE]> <![endif]>2
O

9 8

8 7

Features and Benefits

•Frameless Ceramic Glass Cooktop

•Self-Cleaning Oven with Automatic Oven Door Lock

•Variable Cleaning Time with Delay Clean Option

•One 6”, One 6”/9” Dual Element and Two 7” Ribbon Heating Elements with Bridge Element

•SmartSet Electronic Oven Controls

•Digital Electronic Clock and Kitchen Timer

•Convection Roast and Convection Bake

•Convection Conversion

•3 Oven Shelves

•Automatic Oven Shut-Off with Override

•Roasting Rack

•Hot Surface Indicator Lights

•Broiler Pan with Grid

•Interior Oven Light

•Storage Drawer

•Integrated Designer-Style Handle

•Frameless Glass Oven Door with Big-View Window

•Model JSP56WDWW–White on White

•Model JSP56CDCC–Bisque

•Model JSP56BDBB–Black on Black

Specification Created 1/01