GE JSP47SH Specification

TM

JSP47SH – GE Profile™ 30" Slide-In Electric Range

Dimensions (in inches)

		Accessory				Shave Raised Edge To Clear
		Backguard		30"
					Min.	31-1/8" Wide Control Panel
			Recommended
			6" Min.
24	30	A/B	From Walls			9/16
	31-1/4
2-7/8"
To Front				30" Min.
Surface Of
Countertop
				23-3/16		Acceptable
						Electrical	13" Max.
						Outlet Area	15" Min.
20-5/8" Door
Clearance							25
From Front
Surface of
Countertop			36
				2-1/2
							7-1/2
	27-1/2						2-1/2
				30

If you are NOT using the	If you are using the
optional Filler or Backguard:	optional Filler or Backguard:

KW Rating
240V	11.6
208V	8.7
Breaker Size
240V	40 Amps
208V	40 Amps

Specification Created 1/04

	23-3/16				25
		30						30

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

Listed by

Underwriters

RLaboratories

Note: Cabinets installed adjacent to slide-in electric ranges must have an adhesion spec of at least 194°F temperature rating.

Note: All 30" Slide-In Ranges conform to U.L. requirements for 0" spacing from range to adjacent walls below countertop. To reduce possibility of scorching the side walls above the countertop when no load is present on burners, it is recommended that a minimum 6" spacing from adjacent side wall be allowed for possible extended high-heat element operation.

Receptacle Locations: For all 30" Slide-In Ranges locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall.

Optional Kits for Slide-In Electric Ranges (Available at additional costs)

Accessory Backguards

(Attaches to the back of range as a backguard when unit is installed in 30" free-standing cutout)

JXS37WW – White

JXS37CC – Bisque JXS37BB – Black/Stainless

Body Sides

(Slide-in ranges are sold without sides installed. Can be installed on either left or right when unit has one exposed side [no cabinet adjacent]. Kit contains

1 body side) JXS76WW – White JXS76CC – Bisque JXS76BB – Black

Vertical Side Trim Kits

(If cabinet cutout width is more than 30", a vertical side trim kit may be used to close the gap between the range and cabinet)

JXS86WW – White

JXS86CC – Bisque

JXS86BB – Black

Optional Lower Trim Kits

(If counter height is greater than 36.5", a lower trim kit is recommended to extend the useful height to 38" maximum)

JXS56WW – White

JXS56CC – Bisque

JXS56BB – Black

Optional Top Filler Kits

JXS66WW – White

JXS66CC – Bisque

JXS66BB – Black

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

220440

TM

JSP47SH – GE Profile™ 30" Slide-In Electric Range

Features and Benefits

H		1
2	LO	L

Specification Created 1/04

2

H

8

2

LO

L

O

2

•Self-clean oven – Conveniently cleans the oven cavity without the need for scrubbing

•Electronic oven controls – One-touch electronic pads are easy-to-use and allow for simple oven operation

•Dual size ribbon element – Offers a convenient choice of using a 6" or 9" heating element, depending on the size of the pan

•Super large oven capacity – Provides the impressively large oven interior for cooking more dishes and large meals at one time

•TrueTemp™ system – Delivers even heat distribution and maximum oven control

•Ribbon heating elements – Provide the powerful heat beneath a smooth glass surface to ensure even heat and fast warm-up times

•Ceramic glass cooktop – A smooth cooktop surface makes cleaning quick and easy

•Model JSP47SHSS – Stainless steel

220440