GE JSP42SKSS User Manual
JSP42SK
If you are NOT using the
optional Filler or Backguard:
23-3/16
30
If you are using the optional
Filler or Backguard:
25
30
Acceptable
Electrical
Outlet Area
30" Min.
30" Min.
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
Excluding Models JSS28 and JSP39
2-7/8"
To Front
Surface Of
Countertop
20-5/8" Door
Clearance
From Front
Surface of
Countertop
31-1/4
30
25-3/4**
Recommended
6" Min.
From Walls
23-3/16
15" Min.
A/B*
13" Max.
2-1/2
30
25
9/16
7-1/2
2-1/2
Accessory
Backguard
24
36-1/4
*JXS37 is 5-1/4" and JXS32 is 4"
(excluding handle)
**Total depth from wall to
35-7/8"–38"
from floor to
countertop
Acceptable
Electrical
Outlet Area
30" Min.
30" Min.
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
Excluding Models JSS28 and JSP39
Recommended
6" Min.
From Walls
23-3/16
15" Min.
13" Max.
2-1/2
30
25
9/16
7-1/2
2-1/2
35-7/8"–38"
from floor to
countertop
GE® 30" Slide-In Electric Range
Dimensions and Installation Information
KW Rating
11.6
8.7
240V
208V
Lower/Side Trim Kits Accessory Backguards
JXS56 - Lower Trim Kit JXS37 - Backguard
JXS86 - Vertical Side Trim Kit JXS77 - Body Sides
Note: To reduce possiblity of scorching of the side wall
adjacent to the heating elements, it is recommended
a minimum of 6” spacing from adjacent side walls
be allowed for possible extended, high-heat, no-load
operation of heating elements.
Receptacle Location: For all 30” Slide-In Ranges locally
approved flexible service cord or conduit must be
used because terminals are not accessible after range
installation. See shaded area in drawing for location of
electrical outlet box. Recommended outlet locations
allow range to be installed directly against rear wall.
Note: Cabinets installed adjacent to slide-in ranges
must have an adhesion spec of at least 194°.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Models are shipped with colormatched Rear Filler Strip Kit.
Optional Kits For Slide-In
Electric Ranges
(Available at additional cost)
Dimension and installation information are shown in inches.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Listed by
Underwriters
Laboratories
Specification Revised 1/08
320642
JSP42SK
I
H
8
6
4
2
L
O
L
O
2
4
6
8
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
I
H
8
6
4
2
L
O
2
4
6
8
GE® 30" Slide-In Electric Range
Features and Benefits
• Self Clean Oven - Conveniently cleans the oven cavity without need of scrubbing
• Electronic Oven Controls - One-touch electronic pads are easy-to-use and allow for
simple oven operation
• Dual Size Ribbon Element - Offers a convenient choice of using a 6” or 9” heating
element, depending on the size of the pan
• Super Large Oven Capacity - Provides the impressively large oven interior for cooking
more dishes and large meals at one time
• Ribbon Heating Elements - Provide powerful heat beneath a smooth glass surface
to ensure even heat and fast warm-up times
• Ceramic Glass Cooktop - A smooth cooktop surface makes cleaning quick and easy
• Two Oven Racks - Feature a durable construction to help accommodate any size
or type of cookware
• Certifed Sabbath Mode - Prepared foods can stay warm in accordance with
kosher law
• Big ClearView
progress of the food easy
™
Window - An extra large clear window makes monitoring the
• Frameless Glass Oven Door - Offers an easy-to-clean and stylish design that blends
seamlessly into existing cabinetry
• Interior Oven Light - Supplies light to make viewing the progress of cooking easy
and convenient
• Dual Element Bake - Alternates the upper broiling element and the lower baking
element for even heating and optimal baking results
• Model JSP42SKSS - Stainless steel
Specification Revised 1/08
320642
Loading...