GE JSP34BW Specification

GE JSP34BW Specification

GE Appliances

JSP34BW—30" Slide-In Electric Range

Dimensions (in inches)

 

 

If you are NOT using the

 

 

optional Filler or Backguard:

 

 

23-3/16

 

 

Maintain

30 Min.

 

at least 6"

 

to side walls

18 Min.

6

30

 

 

 

 

30-3/4

30

 

If you are using the

4-1/2

 

6

 

optional Filler or Backguard:

5

 

 

2-1/4

 

35-1/2

Acceptable

 

25

Electrical

 

 

 

Outlet Area

 

 

*Wall to front of

 

30

closed door handle.

 

 

28-1/4*

30

45-1/8

†Range may be placed with 0” clearance (flush) at the back wall and side walls if the range side trims extend beyond the cabinet fronts at least 1/4”. (Self-clean models only).

For answers to your Monogram,®

GE Profile Performance Series,

GE Profileor GE appliance questions, call

GE Answer Center® service, 800.626.2000.

 

 

All GE ranges are equipped with

 

 

 

 

an Anti-Tip device. The installation

 

Listed by

 

 

of this device is an important,

 

 

 

 

Underwriters

 

 

required step in the installation

 

 

 

 

 

 

R

Laboratories

Specification Revised 8/00

 

of the range.

 

 

 

KW Rating

240V 10.8

208V 8.1

Optional Kits (Available at additional cost) JXS28—Rear Filler Strip Kit

JXS31—White Accessory Backguard JXS32—Brushed-Chrome Accessory Backguard JXS33—Almond Accessory Backguard JXS34—Black Accessory Backguard

JXS40—Endcap kit to accommodate replacement where countertop may already be notched.

JXS52BB—Lower Trim Kit (Black) JXS53WW—Lower Trim Kit (White) JXS54AA—Lower Trim Kit (Almond)

Note: All 30" Slide-In Ranges conform to U.L. requirements for

0" spacing from range to adjacent walls below countertop. To reduce possibility of scorching of the side wall adjacent to the heating elements, it is recommended a minimum of 6" spacing from adjacent side walls

be allowed for possible extended, high-heat, no-load operation of heating elements.

Receptacle Location: For all 30" Slide-In Ranges, locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall.

Note: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194°.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

GE Appliances

JSP34BW—30" Slide-In Electric Range

Features and Benefits

• Black on black Model

• Lift-Up Overhanging Porcelain-Enameled Cooktop

• Two 8" and Two 6" Plug-In Calrod® Heating Elements

• Removable Chrome One-Piece Drip Bowls

Self-Cleaning Oven With Automatic Oven Door Lock

SmartSet Electronic Oven Control

Electronic Clock and Kitchen Timer

Delay Bake Option With Cook and Hold

Auto Oven Shut-Off With Override

Broiler Pan With Grid

• 2 Oven Shelves

Interior Oven Light

Frameless Glass Oven Door With Window

Color-Matched Storage Drawer

Designer-Style Handle

Optional Backguard Available At Additional Cost

Also Available In Almond on almond as Model JSP34AW and In White on white as Model JSP34WW

Specification Revised 8/00

Loading...