GE JP980SK Specification
JP980SK
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure at
front
2" MIN.
clearance to
side wall
from cut-out
2" MIN.
clearance to
side wall
from cut-out
18" MIN.
to cabinet
1-3/4" to
rear wall
13" MAX.
depth
3-1/4*
Cooktop
2-1/2
Required
33-7/8
19-1/8
36-1/8
21-3/16
*Depth of unit at conduit connection location
(rear) is 6-1/4"
GE Profile™ 36" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information
†
KW Rating
240V
208V
8.6
6.5
Breaker Size
240V
208V
Note: 36" Ribbon cooktops are approved for use over GE 30" Single Wall
Ovens and Warming Drawers only. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for
current dimensional data. If installed with a GE Profile™ Telescopic
Downdraft System, consult both the cooktop and downdraft installation
instructions packed with product before installing.
supply may need to be re-routed to install downdraft. The countertop
must be at least 26" deep with a flat surface area of 23-1/2" or more,
front to back. In addition, other clearances to the front edge of the
countertop must be considered, especially on raised bullnose countertops.
Consult cabinet and countertop manufacturer’s specs for flush mount
installation prior to install.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
40 Amps
40 Amps
Note: Check local codes for required breaker size
Important: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires an
†
18" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
†
a 48" flexible armored cable.
Cooktop
gas/electric
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Dimension and installation information are shown in inches.
Listed by
Underwriters
Laboratories
Specification Revised 10/06
220577
JP980SK
W
A
R
M
E
R
S
I
Z
E
S
E
L
E
C
T
S
I
Z
E
S
E
L
E
C
T
T
I
M
E
R
S
E
N
S
O
R
S
C
O
N
T
R
O
L
L
O
C
K
PA
N
H
R
M
I
N
GE Profile™ 36" Built-In CleanDesign Electric Cooktop
Features and Benefits
• Electronic Touch Controls – Replaces traditional dial controls with
digital buttons that are precise and easy-to-use
• Precise Digital Control System™ – Delivers accurate control on the cooktop,
ensuring even heating and less temperature variation
• Ceramic Glass Cooktop – A smooth cooktop surface makes cleaning
quick and easy
• Pan Presence Sensor – Detects when a burner element is left “on”
and automatically shuts it off when not in use
• Pan Size Sensor – Automatically adjusts the heating element to the
size of the pan
• Ribbon Heating Elements – Provides powerful heat beneath the smooth
glass surface to ensure even heat and fast warm-up times
• Dual Size Ribbon Elements – Offers a convenient choice of using a
6” or 9” on one and a 5” or 8” on the other heating element, depending
on the size of the pan
• Control Lock Capability – Provides the ability to lock the cooktop's controls,
helping protect from unintended activation
• Model JP980SKSS - Stainless steel
Specification Revised 10/06
220577
Loading...