GE JP969BH, JP989CH User Manual

TM

Specification Created 1/03

JP969BH/CH/SH/WH – GE Profile™36" Built-In CleanDesign Cooktop

Cabinet Installation Dimensions (in inches)

KW Rating

240V 8.6
208V 6.5

Breaker Size

240V 36 Amps

†

208V 31 Amps

†

Flush Mount Installation Kit

Accommodates both 30" and 36" installations. Not for use with stainless steel models.
JXFLMBB (Black—use with black glass cooktops with a white, bisque or black pattern)

Installation Information:

Before installing, consult installation instructions packed with product for current
dimensional data.

†

Note: Check local codes for required breaker size.

Built-In CleanDesign Cooktops

Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e.,
shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation
instructions. Requires an 18" minimum from cooktop to adjacent overhead cabinets. Units
are furnished with a 48" flexible armored cable.

36" Ribbon cooktops are approved for use over GE 30" Single Wall Ovens and warming drawers.
Refer to cooktop and wall oven installation instructions packed with product for current
dimensional data.

Notes: If installing with a GE ProfileTelescopic Downdraft System, consult both cooktop
and downdraft installation instructions packed with product before installing. Cooktop
gas/electric supply may need to be re-routed to install downdraft.

The countertop must be at least 26" deep with a flat surface area of 23-1/2" or more, front to
back. In addition, other clearances to the front edge of the countertop must be considered.

Note: Consult cabinet and countertop manufacturer’s specs for flush mount installation
prior to install.

Electrical junction
box 16" MIN.
below countertop

30" MIN. to
unprotected
cabinet

Cut should not interfere
with cabinet structure
at front

1-3/4" MIN.

clearance to

side wall

from cut-out

1-1/2" MIN.

clearance to

side wall

from cut-out

18" MIN.
to cabinet

1-3/4" to
rear wall

13" MAX.
depth

3-1/4"*

Cooktop

2-1/2"

Required

33-7/8"

19-1/8"

36"**

20-3/8"**

**Depth of unit at conduit connection location (rear) is 6-1/4".

**Width and Depth of stainless model is 36-1/8" and 21".

R

Listed by
Underwriters
Laboratories

For answers to your Monogram,®GE Profile™or
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center®service, 800.626.2000.

TM

Specification Created 1/03

JP969BH/CH/SH/WH – GE Profile™36" Built-In CleanDesign Cooktop

Features and Benefits

• Electronic Touch Controls – Replaces traditional dial controls with digital buttons that are
precise and easy-to-use.

• No Pulse Elements – Provides even cooking, immediate response, and fast heat up.

• Ceramic Glass Cooktop – A smooth cooktop surface makes cleaning quick and easy.

• Pan Presence Sensor – Detects when a burner element is left “on” and automatically shuts

it off when not in use.

• Pan Size Sensor – Automatically adjusts the heating element to the size of the pan.

• Ribbon Heating Elements – Provides powerful heat beneath the smooth glass surface

to ensure even heat and fast warm-up times.

• Dual Size Ribbon Elements – Offers a convenient choice of using a 6" or 9" on one
and a 5" or 8" on the other heating element, depending on the size of the pan.

• Model JP969SHSS – Stainless steel

• Model JP969WHWW – White on white

• Model JP969BHBB – Black on black

• Model JP969CHCC – Bisque on bisque