GE JP960TK, JP960KK, JP960BK Specification
JP960TK/KK/BK
R
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure at
front
2" MIN.
clearance to
side wall
from cut-out
2" MIN.
clearance to
side wall
from cut-out
18" MIN.
to cabinet
1-3/4" to
rear wall
13" MAX.
depth
3-1/4*
Cooktop
2-1/2
Required
33-7/8
19-1/8
33-13/16
19-1/32
36
21-3/16
*Depth of unit at conduit location (rear) is 4-5/8"
GE Profile™ 36" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information
†
KW Rating
240V
208V
9.6
7.2
Breaker Size
240V
208V
Note: 36" Ribbon cooktops are approved for use over GE 30" Single Wall
Ovens and Warming Drawers only. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed with
product before installing. Cooktop gas/electric supply may need to be
re-routed to install downdraft. The countertop must be at least 26" deep
with a flat surface area of 23-1/2" or more, front to back. In addition,
other clearances to the front edge of the countertop must be considered,
especially on raised bullnose countertops. Consult cabinet and countertop
manufacturer’s specs for flush mount installation prior to install.
Flush Mount Installation Kit : Accommodates both 30" and 36" installations.
Not for use with stainless steel models. JXFLM2TW (True White glass)
JXFLM2CC (True Bisque glass) JXFLM2BB (Black – black glass cooktops)
Installation Information:
packed with product for current dimensional data.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
40 Amps
40 Amps
Note: Check local codes for required breaker size
Important: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires an
†
18" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
†
a 48" flexible armored cable.
Before installing, consult installation instructions
Dimension and installation information are shown in inches.
Listed by
Underwriters
Laboratories
Specification Created 12/04
220567
JP960TK/KK/BK
GE Profile™ 36" Built-In CleanDesign Electric Cooktop
Features and Benefits
• Ceramic glass cooktop - A smooth cooktop surface makes cleaning
quick and easy
• Ribbon heating elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times
• Bridge element - Combines three cooktop elements into one large
cooking area, ideal for oversized cooking pans
• Frameless design - A smooth and seamless cooktop surface makes
cleaning quick and easy
• Upfront controls - Controls are placed within easy reach at the front
center of the cooktop
• Control lock capability - Provides the ability to lock the cooktop’s controls,
helping protect from unintended activation
• Hot surface indicator lights - Illuminate when the cooking surface is
active and hot, adding convenience and safe caution
• Heating element “On” light - Illuminates when the cooking surface
is activated
• Model JP960TKWW - True white
• Model JP960KKCC - True bisque
• Model JP960BKBB - Black on black
Specification Created 12/04
220567
Loading...