GE JP940SK Specification
JP940SK
R
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure at
front
1-1/2" MIN.
clearance to
side wall
from cut-out
1-3/4" MIN.
clearance to
side wall
from cut-out
18" MIN.
to cabinet
1-3/4" to
rear wall
13" MAX.
depth
3-1/4*
Cooktop
2-1/2
Required
28-1/2
19-5/8
29 7/8
21-3/8
*Depth of unit at conduit location (rear) is 4-5/8"
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information
†
KW Rating
240V
208V
7.6
5.7
Breaker Size
240V
208V
Note: 30” Ribbon cooktops are approved for use over select GE 30” Single
Wall Ovens and Warming Drawers. All 30" ribbon cooktops can be installed
over 27" wall ovens and warming drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed
with product before installing.
re-routed to install downdraft.
a flat surface area of 23-1/2" or more, front to back. In addition, other
clearances to the front edge of the countertop must be considered.
Consult cabinet and countertop manufacturer’s specs for flush mount
installation prior to install.
Installation Information: Before installing, consult installation instructions
packed with product for current dimensional data.
40 Amps
30 Amps
Note: Check local codes for required breaker size
Important: Requires a 5” free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires an
†
18” minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
†
a 48” flexible armored cable.
Cooktop gas/electric supply may need to be
The countertop must be at least 26" deep with
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Dimension and installation information are shown in inches.
Listed by
Underwriters
Laboratories
Specification Created 12/04
220561
JP940SK
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Features and Benefits
• Ceramic glass cooktop - A smooth cooktop surface makes cleaning
quick and easy
• Ribbon heating elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times
• Dual size ribbon element - Offers a convenient choice of using a 6” or 9”
on one and a 5” or 8” on the other heating element, depending on the
size of the pan
• Frameless design - A smooth and seamless cooktop surface makes
cleaning quick and easy
• Hot surface indicator lights - Illuminate when the cooking surface is
active and hot, adding convenience and safe caution
• Control lock capability - Provides the ability to lock the oven’s controls,
helping protect from accidental operation
• Heating element “On” light - Illuminates when the cooking surface is activated
• Model JP940SKSS - Stainless steel
Specification Created 12/04
220561
Loading...