Page 1
JP910TK/KK/BK
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure at
front
1-1/2" MIN.
clearance to
side wall
from cut-out
1-3/4" MIN.
clearance to
side wall
from cut-out
18" MIN.
to cabinet
1-3/4" to
rear wall
13" MAX.
depth
3-1/4*
Cooktop
2-1/2
Required
28-1/2
19-5/8
28-1/8
19-3/8
29-3/4
21-5/16
*Depth of unit at conduit location (rear) is 4-5/8"
R
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information
†
KW Rating
240V
208V
7.7
5.8
Breaker Size
240V
208V
40 Amps
30 Amps
Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30"
Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed with
product before installing.
to install downdraft.
flush mount installation prior to install. Before installing, consult installation
instructions packed with product for current dimensional data.
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening)
use the following one-piece trim kit to fill in the over-size hole. Available at
additional cost. JXTR32W (True White) JXTR32B (Black glass with black,
white or bisque pattern)
Flush Mount Installation Kit : Accommodates both 30" and 36" installations.
Not for use with stainless steel models. JXFLM2TW (True White) JXFLM2CC (True
Bisque) JXFLM2BB (Black – use with black glass cooktops with a white, bisque
or black pattern)
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Note: Check local codes for required breaker size
Important: Requires a 5" free area between the
bottom of the cooktop to any combustible material,
i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation
instructions. Requires an 18" minimum from cooktop
†
to adjacent overhead cabinets. Units are furnished
†
with a 48" flexible armored cable.
Cooktop gas/electric supply may need to be re-routed
Consult cabinet and countertop manufacturer’s specs for
Dimension and installation information are shown in inches.
Listed by
Underwriters
Laboratories
Specification Created 12/04
220551
Page 2
JP910TK/KK/BK
GE Profile™ 30" Built-In CleanDesign Electric Cooktop
Features and Benefits
• Ceramic glass cooktop - A smooth cooktop surface makes cleaning
quick and easy
• Ribbon heating elements - Provide powerful heat beneath a smooth
glass surface to ensure even heat and fast warm-up times
• Dual size ribbon element - Offers a convenient choice of using a
6” or 9” heating element, depending on the size of the pan
• Frameless design - A smooth and seamless cooktop surface makes
cleaning quick and easy
• Hot surface indicator lights - Illuminate when the cooking surface is
active and hot, adding convenience and safe caution
• Heating element “On” light - Illuminates when the cooking surface is activated
• Control lock capability - Provides the ability to lock the cooktop’s controls,
helping protect from unintended activation
• Model JP910TKWW - True white
• Model JP910KKCC - True bisque
• Model JP910BKBB - Black on black
Specification Created 12/04
220551
Loading...