JP356WM/BM
GE® 30" Built-In CleanDesign Electric Cooktop
Dimensions and Installation Information (in inches)
KW Rating
240V 7.6
208V 5.7
Breaker Size
240V 40 Amps†
208V 30 Amps†
†Note: Check local codes for required breaker size
Important: Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.
Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/ warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Profile™ Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to install downdraft. Consult cabinet and countertop manufacturer’s specs for flush mount installation prior to install. Before installing, consult installation instructions packed with product for current dimensional data.
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening) use the following one-piece trim kit to fill in the over-size hole. Available at additional cost. JXTR32W (True White) JXTR32B (Black glass with black, white or bisque pattern)
29 3/4 21-3/8
Cooktop |
3-1/4* |
|
19-5/8
28-1/2
2-1/2** Required
*Depth of unit at conduit connection location (rear) is 6-1/4" on models PP975/945 and 4-3/16" on models CP350/650, PP944/962/932/912, and JP656/356/336. Depth of unit at baffle (front) is 4-5/8" on models PHP960/900.
**Raised bull nose countertops may require up to 3/8" additional clearance to prevent interference with curved front.
13" MAX. depth
30" MIN. to unprotected cabinet
1-3/4" to rear wall
1-1/2" MIN. (30" cooktop)
2" MIN. (Induction and 36" cooktops) clearance to side wall from cut-out
Electrical junction box 16" MIN. below countertop
15" MIN. to cabinet
1-1/2" MIN. (30" cooktop)
2" MIN. (Induction and 36" cooktops) clearance to side wall from cut-out
Cut should not interfere with cabinet structure at front
Listed by
Underwriters
Laboratories
For answers to your Monogram® or GE® appliance |
|
questions, visit our website at geappliances.com |
Specification Revised 1/15 |
or call GE Answer Center® service, 800.626.2000. |
JP356WM/BM
GE® 30" Built-In CleanDesign Electric Cooktop
Features and Benefits
•Ceramic Glass Cooktop - A smooth cooktop surface makes cleaning quick and easy
•Ribbon Heating Elements - Provide powerful heat beneath a smooth glass surface to ensure even heat and fast warm-up times
•Dual Size Ribbon Element - Offers a convenient choice of using a 9" or
12" heating element, depending on the size of the pan
•Power Boil Element - Provides up to 3,000 watts of power to speed the boiling process
•Frameless Design - A smooth and seamless cooktop surface makes cleaning quick and easy
•Dishwasher-Safe Knobs - Features a robust construction for safe and easy cleaning
•Hot surface Indicator Lights - Illuminate when the cooking surface is active and hot, adding convenience and safe caution
•Melt Setting - Optimized for melting chocolate, this setting delivers the low gentle heat needed
•Model JP356WMWW - White on white
•Model JP356BMBB - Black on black
Specification Revised 1/15