GE JP3036DL, JP3036TL, JP3036SL Specification

JP3036DL/TL/SL

JP3036SL

INSTALLATION ABOVE A WALL OVEN

IMPORTANT: Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.

NOTE: 36" Ribbon cooktops are approved for use over select GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/ electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2" minimum flat countertop surface and 25" minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered.

Before installing, consult installation instructions packed with product for current dimensional data.

Appliances 36" Built-In Knob-Control Electric Cooktop

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

APPROXIMATE COOKING DIMENSIONS

3-1/4" at front of unit and 5-9/16" at conduit location

1-3/4" MIN.

to rear wall

2-1/2" MIN.

To insure accuracy, it is best to make a

INSTALLATION ABOVE A WALL OVEN

template when cutting the opening in the counter

2-1/2" MIN

From front edge

of countertop to front

edge of cooktop cutout

31-1/4" MIN

From top surface

of countertop to

top surface of

wall oven support

platform

18-7/8"

Required

36-1/8"

Cooktop

33-7/8"

to 34"

20-3/8"

33-3/4"

13" MAX. depth of unprotected

overhead cabinets (when no hood or microwave is installed)

19-1/8" to

19-1/4"

Electrical junction box 16" MIN.

30" MIN. from countertop to

unprotected cabinet (when no hood or microwave is installed)

See label next

to nameplate for

MIN. clearance

to wall

below countertop

2" MIN. clearance

to side wall from cut-out

on both sides of cooktop

VOLTAGE (60HZ AC) 240V CONNECTED LOAD (MAX.) 9.0kW CURRENT DRAW (MAX.) 37.5 A mps 34.3 Amps RECOMMENDED CIRCUIT BREAKER†40 Amps 40 Amps

†

NOTE: Check local codes for required breaker size.

15" MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop

208V

7.1kW

For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

ADA

COMPLIANT

Listed by Underwriters Laboratories

Specification Revised 6/20

JP3036DL/TL/SL

FEATURES AND BENEFITS

Four radiant cooking elements

Power Boil dual-ring element

Keep warm setting

Warm i n g zon e

Melt setting

Hot surface indicator lights

Cooktop "on" indicator light

Fit Guarantee

Model JP3036DLBB – Black on black

Model JP3036TLWW – True white

Appliances 36" Built-In Knob-Control Electric Cooktop

Model JP3036SLSS – Stainless steel

GUARANTEED FIT Replacing a similar cooktop from GE Appliances or another brand? GE cooktops are guaranteed for an exact fit or GE Appliances will pay up to $100 toward modifications

Visit geappliances.com for more info

Specification Revised 6/20