GE JGSP31, JGSP30, JGSP40 User Manual

Download

Page 1

Gas Slide-h Range

Safety

Anti-Tip Device ..................................2, 3,34

Problem

Thermostat Adjustment–

Do It Yourself ............................................20

More questions

Operating Instructions, Tips

Aluminum Foil ..................................5, 18,23

Features

Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Baking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18

Broiling, Broiling Guide ...............:...23, 24

Control, Clock and Timer

Fan ...........14, 16, 18, 19,21,23,26,27

Light; Bulb Replacement ................15,33

Oven Vent .....................................4, 15,32

Preheating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Roasting, Roasting Guide ...............21,22

Self-Cleaning instructions ..............25-28

Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 16

Timed Baking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18, 19

Surface Cooking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11

Control Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11

Cooktop Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Cookware Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

14-28

2, 13

Preparation ............................7, 34,35

Anti-Tip Device .............................................34

Flooring Under the Leveling

Minor Adjustments.....................................3 5

Packaging

Consumer

Appliance Registration .................................2

Important Phone Numbers .......................39

Model and Serial Number Location ..........2

Center” 8011626.2000

and

Burner Assembly Door

Glass Cooktop ..............................................30

Removable Oven Bottom ..........................33

Self-Cleaning instructions...................25-2 8

Shelves

GE Appliances

...................29-33

Models: JGSP30

JGSP31

Page 2

HELP US HELP YOU...

Read this guide carefully.

It is

intended to help you operate and maintain your

new range properly. Keep it handy for answers to your questions. If you don’t understand something or need more help,

write (include your phone number):

Consumer Affairs GE Appliances Appliance Park Louisville, KY 40225

Write down the model and serial numbers.

You’ll find the model and serial numbers on a label on the range front frame behind the storage drawer.

These numbers are also on the Consumer Product Ownership Registration Card that came with your range. Before sending in this card, please write these numbers here:

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.

— Do not store or use gasoline or other

flammable vapors and liquids in the vicinity of this or any other appliance.

— WHAT TO DO IF YOU SMELL GAS

●

Do not try to light any appliance.

●

Do not touch any electrical switch; do

not use any phone in your building.

Immediately call your gas supplier from

a neighbor’s phone. Follow the gas supplier’s instructions.

Model Number

Use these

numbers in any correspondence or service

Serial Number

calls concerning your range.

If you received a damaged range...

Immediately contact the dealer (or builder) that sold you the range.

Save time and money. Before you request service . . .

Check the Problem Solver in the back of this guide. It lists causes of minor operating problems that you

can correct yourself.

A WARNING

ALL RANGES

CAN TIP

INJURY TO PERSONS

COULD RESULT

●

INSTALL ANTI-TIP

DEVICES PACKED WITH RANGE

●

SEE INSTALLATION

INSTRUCTIONS

●

If you cannot reach your gas supplier,

call the tire department.

— Installation and service must be

performed by a qualified installer, service agency or the gas supplier.

IF YOU NEED SERVICE

To obtain service, see the Consumer Services page in the back of this guide.

To obtain replacement parts, contact GE/Hotpoint Service Centers.

We’re proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are three steps to follow for further help.

FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the details—including your phone number—to:

Manager, Consumer Relations GE Appliances Appliance Park Louisville, KY 40225

FINALLY, if your problem is still not resolved, write:

Major Appliance Consumer Action Panel 20 North Wacker Drive Chicago, IL 60606

“2

Page 3

●

The California Safe Drinking Water and’ Toxic

Enforcement

requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm,

requires businesses to warn

customers of potential exposure to such substances.

●

Gas appliances can cause minor exposure

four of these substances,

namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LP fuels. Properly adjusted burners, indicated by

bluish rather than a yellow flame, will minimize incomplete combustion. Exposure to these substances can be minimized by venting with an open window or using a ventilation fan or hood.

When You Get Your Range

●

Have the installer show you the location of the

range gas cut-off valve and how

—

if necessary.

shut

off

After prolonged

temperatures may

will not withstand this

of a range, high floor

and many floor

Never install the range over vinyl tile or linoleum that cannot withstand such type of use. Never install it directly over interior kitchen carpeting.

Using Your Range

●

Do not leave children

where a range is hot or in operation.

be seriously burned.

●

anyone to climb, stand or hang

the oven door, storage drawer or

They could damage the range and even tip it over, causing severe personal injury,

CAUTION: ITEMS

CHILDREN SHOULD NOT BE STORED CABINETS ABOVE A RANGE OR ON THE BACKSPLASH

A RANGE-CHILDREN CLIMBING ON THE RANGE ITEMS COULD BE SERIOUSLY INJURED.

or unattended

They could

INTEREST

●

your range installed and properly

grounded by a qualified installer,

accordance with the Installation Instructions. Any adjustment and service should be performed only by qualified gas range installers or service technicians.

●

attempt to repair or replace any

part of your

unless specifically

this

All other service

should be referred to a

technician.

Plug your range into a 120-volt grounded

outlet only.

not remove the round grounding prong from the plug. If in doubt about the grounding of the home electrical system, personal responsibility and obligation

is your

have an

ungrounded outlet replaced with a properly grounded, three-prong outlet in accordance with the National Electrical Code. use an extension cord with this appliance.

●

Be sure all packaging materials are removed

from the range

before operating it to prevent fire

or smoke damage should the packaging material ignite.

—

●

Locate the range out of kitchen traffic path

and out of drafty locations to prevent

outage and poor air circulation.

ranges can tip and To prevent accidental tipping of the range,

attach it to the wall or

installing the Anti-Tip

device

Make sure

chain

fits securely into the bracket. If

the range out from the

wall

reason, make sure the Anti-Tip device is engaged before YOU the range back against the wall, If it is not, there is a possible risk of the range tipping over and causing injury if you or a

stand, sit or lean

on an open door.

refer to the Anti-Tip device information

this guide. Failure

take this precaution could

result in tipping of the range and injury. Do not allow the chain or bracket to damage the

gas plumbing in any way.

●

Let the burner

other surfaces cool before touching them or leaving them where children can reach them.

(continued nexrpage)

Page 4

IMPORTANT SAFETY INSTRUCTIONS

(continued)

while

wear

the appliance.

fitting or hanging garments

careful when reaching for items stored in cabinets over the range. Flammable material could be ignited if brought

contact with flame or hot oven surfaces

may cause, severe burns.

Teach children

to play with the

or any other part of the range.

oven door

when you are

not watching the range.

●

curtains

keep combustible

coverings,

drapes a safe distance from

your range.

●

For your safety,. never use. your appliance

for warming

●

Always keep dish towels, dish cloths, pot

holders

and

heating

other linens a safe distance

from your range.

●

keep wooden and plastic utensils

distance away from

your range.

●

not

water on grease

pick up a flaming pan.

Turn

controls off. Smother a

flaming pan on a surface burner by

the pan completely with a well-fitting

sheet or flat tray. Use a multi-purpose

dry Flaming grease outside a pan can

put out by covering it with baking soda or, if available, by using

dry chemical or foam-type

fire extinguisher,

oven

be smothered completely by closing the oven door and turning the oven off or by using a multi-purpose dry chemical or foam-type fire extinguisher.

●

products, cooking utensils

or food in the oven

not store

a range

●

store or

drawer or near a cooktop.

combustible materials,

not in use.

materials

gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

●

When cooking pork,

follow the directions exactly and always cook the meat to an internal temperature

at least

This assures that, in the remote possibility that trichina maybe present in the meat, it will be killed and the meat

be safe to eat,

Surface Cooking

Always use the

igniting the top burners and make burners have ignited.

●

Never leave the surface burners unattended at

high flame settings.

greasy

Adjust the top burner flame size so it does not

beyond the edge of the cookware.

Excessive

●

Use only dry pot holders—

or damp potholders on hot surfaces

may result in burns from steam. Do not let pot holders come near open flames when lifting cookware.

cloth in place of a pot holder. Such cloths

can catch

on a hot burner.

When using glass cookware, make sure it is

designed for top-of-range cooking.

●

To minimize the possibility of

materials and spillage, turn cookware handles toward the side of the range without extending over adjacent burners.

Always turn the surface burners off before

removing cookware.

●

Carefully watch foods being fried at a high

flame setting.

●

Never block

range,

They provide the are necessary for the range to operate properly with correct combustion, Air openings are located at the rear of the cooktop, at the top of the oven door, and under the storage drawer..

position when

the

cause smoking and

that may catch

fire.

is hazardous.

moist

not use a towel or other -

back

vents (air openings) of the

inlet and outlet that

cooking grease or other flammable

materials accumulate in or near the range.

Page 5

not wok has a the burner grate to support

acts as a heat trap, which may

grate and burner head.

a wok on the cooking surface if the

metal ring

wok. This ring.

it may

the burner to work improperly. This may cause a carbon monoxide level above that allowed by current standards, resulting

●

Foods for frying should be as dry as possibh

Frost on

foods

moisture

can cause hot fat to

fresh

up and over the sides

of the pan.

●

Use the least possible amount of fat for effective

shallow or deep-fat frying.

Filling

full of fat can cause spillovers when added.

●

If a combination of oils or

in frying,

stir together before heating or as fats

melt slowly.

Always heat fat slowly,

●

Use a deep fat thermometer whenever

possible to prevent

and watch as it heats.

fat

the smoking point.

●

Never try to move a pan of hot

a deep fat fryer.

Use proper pan

Wait until the fat is

size-Avoid pans that are

especially

unstable or easily tipped. Select cookware having flat bottoms large enough to cover burner grates. To avoid spillovers, make sure enough to contain the food properly. This

both save cleaning time and prevent hazardous accumulations of food, since heavy spattering or

left on

that can be

●

When flaming foods are

can

Use

and

the

the fan off. The fan, if operating, may spread the flames.

Do not leave plastic items on the

they

may melt if left

●

Keep all plastics

the vent.

from the

burners.

not leave any items on the

hot air from the vent may ignite flammable will increase pressure in closed containers, may cause

If you smell gas,

call a qualified service

to burst.

turn off the gas to the

Never use an

and

open flame to locate a leak.

●

avoid the

certain that

the

attempting to

* Never ”clean

the

cleaners

cloths could

near

a burn,

for

are cool

surface when it is hot.

noxious fumes and

steam burns if

or cans of

range.

drippings

Oven

the

●

door

away

can

oven f&e from

*Place

●

the

oven

a precaution against

surfaces of

unopened

Pressure could build up and the container

causing an injury.

*@not

described

result in a fire hazard

cooking or

for use in

wh~~

the fat may

excessive flare-ups.

@After

the package directions.

use your

and clean it.

catch fire

ignite.

the range

The

air

burns to

the desired position

COOL

heavy foods. It is

burns

containers.

foil anywhere in the

this guide.

to dry newspapers.

on fire.

cookware that is

always

Trim excess fat

the broiler pan

opening the

steam

face and eyes.

buildup.

is a

touching

Misuse could

to the range.

hags

to the flame,

prevent

pan.

(continued next page)

are at

the

the broiler

Page 6

●

turn

Keep

a grease

off

contain fire until

Oven

●

parts listed in the

Guide.

self-cleaning the

pan, rack and other cookware.

essential for a good seal.

damage

●

self-cleaning

the oven

Have

serviced by

and.

the broiler

keep

door

out.

of accumulations

which may ignite.

Use and Care

remove the

The door

careful not to rub,

malfunctions,

the power supply.

●

‘not

in or around any, part oven.

oven cleaners ‘will damage the inside of the when

cleaners.

oven liner of any kind

self-clean cycle

used.

commercial oven

from

Conversion

shipped from the factory set

with

have your sales person order an

WARNING:

qualified service

the authority having jurisdiction. Failure serious. agency

the

&property damage. The

this

Gas.

adjustments must be made by a

and all codes and

instructions could result in

wish to

Conversion. Kit.

accordance with the

assumes responsibility

THESE

can

Page 7

Flooring Under the Range

Your range,

like so many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. When moving the range on this type of flooring, it should be installed on a l/4-inch-thick sheet of plywood (or

similar material) as follows:

ends at the front of the range,

will rest on should be built up with plywood to the same level or higher than the floor covering. This will allow the range to be moved for cleaning or servicing.

When thejloor covering

the area that the range

Leveling the Range

Use a

back out the four legs. The flanges (rims) below the

sides of the cooktop must be raised above the top of the countertop. Carefully slide the range into its installation space. Observe that it is clearing the countertop. Then place a spirit level or a glass measuring cup partially filled with water on one of the oven shelves to check for levelness. If using a spirit level, take two readings, with the level placed diagonally first in one direction and then the other.

—

Adjust the four legs carefully. Level the range front to back and side to side. The range legs must rest on the floor. The range

open-end or adjustable wrench to equally

must not hang

from the countertop.

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove packaging tape

adhesive on new appliances is an application of a

household liquid dishwashing detergent, mineral oil

or cooking oil. Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape must be removed from the chrome trim on range parts. It cannot be removed if it is baked on.

Removing Packing Materials

Check your range to insure all packaging materials and protective tape covering are removed from areas such as the door trim, cooktop frame, end caps, etc. before using.

Page 8

OF YOUR RANGE

JGSP30 JGSP31

JGSP40

Page 9

Feature Index

Explained

on page

1 Model and Serial Numbers

2 Oven Door Gasket

3 Removable Oven Bottom

4 Oven Shelves with Stop-Locks

5 Automatic Oven Door Latch

6 Surface Burner Controls

9 Anti-Tip Device

10 Surface Burners and Grates 11 Oven Light Switch 12 Oven Controls

Cooktop

Oven Vent

See

the Installation Instructions.

Automatic Oven Timer Oven Thermostat Clock Timer

6,25,31

5, 14, 16,

25,32 25-28

10,30

4, 15,32

2,3,34

29,30

12, 13

13 13

13 Automatic Oven Light Switch 14 Oven Interior Light

15 Broil Burner 16 Oven

Shelf positions for cooking are suggested

in the Baking, Roasting and Broiling sections.

17 Lift-Off Oven Door

Sure Grip Handle

19 Broiler Pan and Rack

Do not clean in the self-cleaning oven.

20 Storage Drawer

Supports

15,33

5, 15,26

4, 6, 25, 31

5,6,21,24

3,4,31

Page 10

HOW DOES THIS COOKTOP COMPARE

TO YOUR OLD ONE?

Your new cooktop has gas burners. If you are used

to cooking with induction or other electric surface units, you will notice some differences when you use gas burners,

Type of Cooktop Description Gas Burners

Radiant (Glass Ceramic) Cooktop

I Rewlarorsealed

gas-burners use either

LP gas

or natural gas. Electric coils

under a

ceramic cooktop.

How it Works

Flames heat the pans directly. Pan flatness is not critical to cooking results, but pans should be well balanced. Gas burners heat the pan right away and change heat settings right away. When you turn the control off, cooking stops right away.

Heat travels to the glass surface and then to the cookware, so pans must be flat on the bottom for good cooking results. The glass cooktop stays hot enough to continue cooking after it is turned off. Remove the pan from the surface unit if you want cooking to stop.

Induction

./,

Electric Coil

Solid Disk

High frequency induction coils under a glass

surface.

Flattened metal tubing containing electric resistance wire suspended over a drip pan.

Solid cast iron disk sealed to the cooktop surface.

Pans must be made of ferrous metals (metal that attracts a magnet). Heat is produced by a magnetic circuit between the coil and the pan. Heats up right away and changes heat settings right away, like a gas cooktop. After turning the control

off, the glass cooktop is hot from the heat of the pan, but cooking stops right away. Heats by direct contact with the pan and by heating the air under the pan. For best

cooking results, use good quality pans. Electric coils are more forgiving of warped pans than radiant or solid disks. Heats up quickly but does not change heat settings as quickly as gas or induction. Electric coils stay hot enough to continue cooking for a short time after they are turned off.

Heats by direct contact with the pan, so pans must be flat on the bottom for good cooking results. Heats up and cools down more slowly than electric coils. The disk stays hot enough to continue cooking after it is turned off. Remove the pan from the solid disk if you want the cooking to stop.

The best types of cookware to use, plus heat-up and cool-down times, depend upon the type of burner or

surface unit you have.

The following chart will help you to understand the differences between gas burner cooktops and any other type of cooktop you may have used in the past.

SUREACE COOKING

Electric Ignition

Your surface burners are lighted by electric ignition, eliminating the need for standing pilot lights with constantly burning flames.

In case of a power failure, you can light the surface burners on your range with a match. Hold a lighted match to the burner, then turn the knob to the LITE position. Use extreme caution when lighting burners this way.

Surface burners in use when an electrical power failure occurs will continue to operate normally.

Surface Burner Controls

Knobs that turn the surface burners on and off are marked as to which burners they control. The two knobs on the left control the left front and left rear burners. The two knobs on the right control the right front and right rear burners.

Page 11

Light a Surface Burner

Push the control knob in and turn it counterclockwise to You will hear a little “clicking” noise— the sound of the electric spark igniting the burner.

The lowest setting of the burner has a small flame to provide simmering capability. To simmer foods, set the

control knob to the lowest setting that will

maintain the desired simmer.

\\\\

After Lighting a Burner

Check to be sure the burner you turned on is the one you want to use.

Do not operate a burner for an extended period of time without cookware on the grate. The finish on the mate mav

Be sure the burners and grates are cool before you place your hand, a pot holder, cleaning cloths or other materials on them.

without cookware to absorb the heat. OF COOKWARE, NEVER

If simmering on one burner and the other burners are turned on, the gas flow of the simmering burner may have to be adjusted.

After the burner ignites, turn the knob to adjust the flame size.

You may occasionally hear the igniter ticking, even though the burner is lit. This is normal and is caused by drafts or by air disturbances from nearby objects. For safety, the burner will attempt to relight whenever it senses that the flame is distorted.

How to Select Flame Size

Watch the flame, not

The flame size on a gas burner should match the cookware you are using.

FOR SAFE HANDLING LET THE FLAME EXTEND

UP THE SIDES OF THE COOKWARE. Any flame lamer than the bottom of the cookware is

the

knob, as you reduce heat.

Cookware

Aluminum: Medium-weight cookware is recommended because it heats quickly and evenly.

Most foods brown evenly in an aluminum skillet. Use saucepans with tight-fitting lids when cooking with minimum amounts of water.

Cast Iron: If heated slowly, satisfactory results.

Enamelware: Under some conditions, the enamel

of some cookware may melt. Follow cookware manufacturer’s recommendations for cooking methods.

Glass: There are two types of glass cookware-those for oven use only and those for top-of-range cooking (saucepans, coffee and teapots). Glass conducts heat very slowly.

Heatproof Glass Ceramic:

surface or oven cooking. It conducts heat very slowly and cools very slowly. Check cookware manufacturer’s directions to be sure it can be used on gas ranges.

Stainless Steel: This metal alone has poor heating

–

properties and is usually combined with copper,

aluminum or other metals for improved heat distribution. Combination metal skillets usually work satisfactorily if they are used with medium heat as the manufacturer recommends.

most

skillets will give

Can be used for either

Wok Cooking

We recommend that you use only a flat-bottomed wok. They are available at your local retail store.

Do not use woks that have support rings. Use of these types of woks, with or without the dangerous. Placing the ring

over the burner grate may cause the burner to work improperly resulting in carbon monoxide levels above allowable current standards. This could be dangerous to your health. Do not try to use such woks without the ring. You could be seriously burned if the wok tipped over.

in place, can be

Page 12

FEATURES OF YOUR OVEN CONTROL

1. CLEAR/OFF. Press this pad to cancel all oven

operations except clock and timer.

2. PROGRAM STATUS. Words light up in the

display to indicate what is in time display. Programmed information can be displayed at any

time by pressing the pad of the operation you want to see. For example, you can display the current time of day while the timer is counting down by pressing the CLOCK pad.

3. TIME DISPLAY. Shows the time of day, the times

set for the timer or automatic oven operation.

4. OVEN TEMPERATURE AND BROIL DISPLAY. Shows the oven temperature or the broil setting selected.

5. FUNCTION INDICATORS. Lights up to

show whether oven is in the bake, broil or

clean mode.

6. INCREASE. Short taps to this pad increase the

time or temperature by small amounts. Press and hold the pad to increase the time or temperature by larger amounts.

7. DECREASE. Short taps to this pad decrease

the time or temperature by small amounts. Press and hold the pad to decrease the time or temperature by larger amounts.

8. BAKE. Press this pad to select the bake function.

9. BROIL. Press this pad to select the broil function.

10. CLEAN. Press this pad to select the self-cleaning

function. See the Operating the Self-Cleaning Oven section.

11.

COOK TIME.

operations.

12. STOP TIME. Use this pad along with the COOK

TIME or CLEAN pad to stop automatically at a time you select.

13.

CLOCK.

Then press the INCREASE or DECREASE pad to change the time of day. Press the clock pad to start.

14.

TIMER ON/OFF.

timer function.

To set the timer, first press the TIMER ON/OFF

pad. Then press the INCREASE or DECREASE pad to change the time.

To cancel the timer, press and hold the TIMER

ON/OFF pad until the word “TIMER” disappears from the display.

If “F-” and a number flash in the display and the oven control signals, this indicates function error code. Press the CLEAR/OFF pad.

Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the range and call for service.

Press this pad for Timed Baking

To set clock, first press the CLOCK pad.

Press this pad to select the

Page 13

Clock

The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a Timed Baking or Self-Cleaning cycle.

To Set the Clock

1. Press the CLOCK pad.

CLOCK

Press the

INCREASE or DECREASE

day.

Timer

The timer is a minute timer; it does not control oven operations. The maximum setting on the timer is 9 hours and 55 minutes.

To Set the Timer

TIMER ON/OFF

—

To Reset the Timer

If “TIMER” is displayed, press the INCREASE or

DECREASE pad until desired time is reached.

If “TIMER” is not displayed, press the TIMER ON/OFF pad first, then follow the instructions above to set the timer.

1. Press the TIMER ON/OFF pad.

2. Press the INCREASE or DECREASE pad to set the amount of time on the timer.

To Cancel the Timer

Press and hold the TIMER ON/OFF pad until the word “TIMER” disappears from the display.

The timer will start automatically within a few seconds of releasing the pad. The timer, as you are setting it, will display seconds until

1 display minutes and seconds until 60 minutes is reached.

After 60 minutes, it will display hours (“HR” now appears in display) and minutes until the maximum time of 9 hours and 55 minutes is reached.

is reached.”Then it will

End of Cycle Tone

The end of cycle tone is a series of 3 beeps followed by 1 beep every 6 seconds. If you would like to remove the signal that beeps every 6 seconds, press and hold the

To return the signal that beeps every 6 seconds, press and hold the CLEAR/OFF pad for 10 seconds.

Display Messages

If “door”

Close the door. If “LOCK” appears in the display, the

oven door is in the locked position. BAKE, BROIL and COOK TIME cannot be set if the door is in the locked position.

Power Outage

After a power outage, when power is restored, the display will flash and

—

time shown will no longer be correct-for example, after a 5-minute power interruption the clock will be 5 minutes slow.

All other functions that were in operation when the power went out will have to be programmed again.

appears

the display,

the door is open.

Page 14

Before Using Your Oven

USING YOUR OVEN

1. Look at the controls. Be sure you understand

how to set them properly. Read over the directions for the Oven Controls so you understand how to use them.

2. Check the oven interior. Look at the shelves. Take a practice run at removing and replacing them properly, to give sure, sturdy support.

3. Read over information and tips that follow.

4. Keep this guide handy so you can refer to it, especially during the first weeks of using your new range.

Electric Ignition

The oven burner and broil burner are lighted by electric ignition.

To light either burner, touch the pad for the desired

function and press the INCREASE or DECREASE pad until the desired temperature is displayed. The burner should ignite within 30-90 seconds.

After the oven reaches the selected temperature, the burner cycles—off completely, then on with a full

flame-to keep the oven temperature controlled.

NOTE:

● You may notice a “burning” or “oily” smell the

first few times you turn your oven on. This is normal in a new oven and will disappear in a short time. To speed the process, set a self-clean cycle for a minimum of 3 hours. See the Operating the Cleaning Oven section.

A fan may automatically turn on and off to cool

internal parts. This is normal and the fan may continue to run even after the oven is turned off.

Power Outage

CAUTION: DO NOT MAKE ANY ATTEMPT TO OPERATE THE ELECTRIC IGNITION OVEN DURING AN ELECTRICAL POWER OUTAGE. Neither the oven nor the broiler can be lit during an electrical power outage. Gas will not flow unless the glow bar is hot.

If the oven is in use when a power outage occurs, the oven burner shuts off and cannot be

power is restored.

until

Oven Shelves

The shelves are designed with stop-locks so that

when placed correctly on the shelf supports, they

will stop before coming out completely from the

oven, and will not tilt when removing food from or placing food on them.

When placing cookware on a shelf, pull the shelf out

to the “stop” position. Place the cookware on the

shelf, then slide the shelf back into the oven. This will

eliminate reaching into the hot oven.

To remove the shelves from the oven, pull them

toward you, tilt front end upward and pull them out.

To replace,

the stop-locks (curved extension of the shelf) facing up

toward the rear of the oven. Tilt up the front and push

the shelf toward the back of the oven until it goes past

the bump on the shelf support. Then lower the front of

the shelf and push it all the way back.

place the shelf on the shelf support with

Page 15

Shelf Positions

The oven has 4 shelf supports, identified in this illustration as A (bottom), B, C and D (top).

Shelf positions for cooking are suggested in the Baking, Roasting and Broiling sections.

Oven Light

The light comes on automatically when the oven door is opened. Use the switch on the control panel to turn the light on and off when the door is closed.

Oven Vent

Your oven is vented through ducts at the rear of the range. Do not block these ducts when cooking in the oven—it is important that the flow of hot air from the oven and fresh air to the oven burner be uninterrupted. Avoid touching the vent openings or nearby surfaces during oven or broiler they may become hot.

● Vent openings and nearby surfaces may become

● Do not leave any items on the cooktop. The hot air

from the vent may ignite flammable items and will increase pressure in closed containers, which may cause them to burst.

● Metal items will become very hot if they are left

on the cooktop, and could cause burns.

hot. Do not touch them.

● Handles of pots and pans on the cooktop may

become hot if left too close to the vent.

● Do not leave plastic

items on the melt

to the vent.

‘

Oven Moisture

As your oven heats up, the temperature change of the air in the oven may cause water droplets to form on the door glass. These droplets are harmless and will evaporate as the oven continues to heat up.

Page 16

BAKING

Your oven temperature is controlled very accurately using an oven control system. We recommend that you operate the range for a number of weeks using the time given on recipes as a guide to become familiar with your new oven’s

How to Set Your Range for Baking

To avoid possible burns, place shelves in the correct

position before you turn the oven on.

1. Press the BAKE pad.

2. Press the INCREASE or DECREASE pad until the desired temperature is displayed.

The oven will start automatically. The word “ON”

and “100°” will be displayed. As the oven heats up, the display will show the changing temperature. When the oven reaches the temperature you set, a tone will sound.

Oven Shelves

If you think an adjustment is necessary, see the Adjust the Oven Thermostat section. It gives easy

on how to adjust the thermostat.

NOTE: When the oven gets hot, the top and outside surfaces of the range get hot too.

3. Press the CLEAIVOFF pad when baking is finished and then remove the food from the oven.

NOTE: A fan may automatically turn on and off to cool internal parts. This is normal, and the fan may continue to run after the oven is turned off.

To change the oven temperature during BAKE cycle, press the BAKE pad and then the INCREASE

or DECREASE pad to get the new temperature.

Arrange the oven shelf or shelves in the desired locations while the oven is cool. The correct shelf position depends on the kind of food and the browning desired. As a general rule, place-most foods in the middle of the oven, on either shelf positions B or C. See the chart for suggested shelf positions.

Preheating

Preheat the oven if the recipe calls for it. Preheat means bringing the oven up to the specified temperature before putting the food in the oven.

To preheat, set the oven at the correct

selecting a higher temperature does not shorten

preheat time.

Type of Food

Angel food cake Biscuits or muffins B or C

Cookies or cupcakes

Brownies Layer cakes B or C

Bundt or pound cakes Pies or pie shells B or C Frozen pies

Casseroles Roasting

Preheating is necessary for good results when baking cakes, cookies, pastry and breads. For most casseroles

and roasts, preheating is not necessary. For ovens

without a preheat indicator light or tone, preheat

10 minutes. After the oven is preheated, place the food in the oven as quickly as possible to prevent heat from escaping.

Shelf Position

BorC

B or C

A or B

A (on cookie sheet) BorC A orB

Page 17

Pans

Use the proper baking pan. The type of finish on the pan determines the amount of browning that will occur.

● Dark, rough or dull pans absorb heat resulting in a

browner, crisper crust. Use this type for pies.

● Shiny, bright and smooth pans reflect heat, resulting

in a lighter, more delicate browning. Cakes and cookies require this type of pan.

● Glass baking dishes absorb heat. When baking in

glass baking dishes, the temperature may need to be reduced by

Pan Placement

For even cooking and proper browning, there must be enough room for air circulation in the oven. Baking results will be better if baking pans are centered as much as possible rather than being placed to the front or to the back of the oven.

Pans should not touch each other or the walls of the oven. Allow 1- to as from the back of the oven, the door and the sides. If you use two shelves, stagger the pans so one is not directly above the other.

Baking Guides

When using prepared baking mixes, follow package recipe or instructions for the best baking results.

When baking cookies, flat cookie sheets (without sides) produce better-looking cookies. Cookies baked

—

in a jelly roll pan (short sides all around) may have darker edges and pale or light browning may occur.

Do not use a cookie sheet walls or the door of the oven. Never entirely cover a shelf with a large cookie sheet.

For best results, use only one cookie sheet in the oven at a time.

large that it touches the

space between pans as well

Pies

For best results, bake pies in dark, rough or dull pans to produce a browner, crisper crust. Frozen pies in foil pans should be placed on an aluminum cookie sheet for baking since the shiny foil pan reflects heat away from the pie crust; the cookie sheet helps retain it.

Cakes

When baking cakes, warped or bent pans will cause uneven baking results and poorly shaped products.

A cake baked in a pan larger than the recipe

recommends will usually be crisper, thinner and drier

than it should be. If baked in a pan smaller than

recommended, it may be undercooked and batter may

overflow. Check the recipe to make sure the pan size used is the one recommended.

(continued next page)

17’

Page 18

BAKING

(continued)

Aluminum Foil

Never entirely cover a shelf with aluminum foil. This will disturb the heat circulation and result in poor baking. A smaller sheet of foil maybe used to catch a several inches below the food.

by placing it on a lower shelf

Don’t Peek

Set the timer for the estimated cooking time and do DO NOT open the door to check until the minimum not open the door to look at your food. Most recipes time. Opening the oven door frequently during provide minimum and maximum baking times such cooking allows heat to escape and makes baking as “bake 30-40 minutes.”

times longer. Your baking results may also be affected.

TIMED BAKING

How to Time Bake

The oven control allows you to turn the oven on or

off automatically at specific times that you set.

NOTE: Before beginning make sure the clock shows

the correct time of day.

How to Set Immediate Start and Automatic Stop

To avoid possible burns, place the shelves in the

correct position before you turn the oven on. The oven will turn on immediately and cook for a

selected length of time. At the end of Cook Time,

the oven will turn off automatically.

1. Press the COOK TIME pad.

NOTE: If your recipe requires preheating, you may need to add additional time to the the Cook Time.

2. Press the INCREASE pad until the desired length of baking time appears in the display.

3. Press the BAKE pad.

the INCREASE or DECREASE pad until the desired temperature is displayed. An attention tone will occur if step 3 is not done.

To set the clock, first press the CLOCK pad. Press the INCREASE or DECREASE pad until the correct time of day is displayed.

The oven will start automatically. The word “ON”

and “100°” will be displayed. The Cook Time will begin to count down. As the oven heats up, the display will show the changing temperature. When the oven reaches the temperature you set,

a tone will sound. The oven will continue to cook

for the programmed amount of time, then shut off

automatically.

Press the CLEAR/OFF pad to clear the display

if necessary. Remove the food from the oven.

Remember, even though the oven shuts off automatically, foods continue cooking after the

controls are off.

NOTE:

Foods that spoil easily, such as milk, eggs,

sit for more than one hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure that the oven light is off because heat from the bulb will speed harmful bacteria growth.

● A fan may automatically turn on and off to cool

internal parts. This is normal, and the fan may continue to run after the oven is turned off.

Page 19

How to Set Delay Start and Automatic Stop

Quick Reminder:

1. Press the COOK TIME pad.

2. Press the INCREASE/DECREASE pad to set the Cooking Time.

3. Press the STOP TIME pad.

4. Press the INCREASE/DECREASE pad to set the length of Cooking Time.

5. Press the BAKE pad.

6. Press the INCREASE/DECREASE pad until the desired temperature appears in the display.

To avoid possible burns, place the shelves in the correct position before you turn the oven on.

You can set the oven control to delay-start the oven, cook for a specific length of time an-d then turn off automatically.

For example: Let’s say it’s

shortly after

The recipe suggests 3 hours baking

time at 325°F. Here’s how:

—

COOK TIME

1. Press the COOK TIME pad.

NOTE: If your recipe requires preheating, you may need to add additional time to the Cook Time.

2. For 3 hours of cooking time, press the INCREASE

pad until

appears in the display.

3. Press the STOP TIME pad.

STOP TIME

appears in the display and “STOP TIME” flashes. The control automatically sets the Stop Time by adding the Cook Time to the time of day. In this example, the time of day is Cook Time is 3 hours. Adding 3 hours to the time of day equals

and dinner time is

and the

4. Change the Stop Time from pressing the INCREASE pad until

appears

in the display.

5. press the BAKE pad.

BAKE

6. Press the INCREASE or DECREASE pad until “325°” is displayed.

At word “ON” and “100°” will be displayed. The Cook Time will begin to count down. As the oven heats up, the display will show the changing temperature,. The oven will continue to cook for the programmed 3 hours and shut off automatically at

7. Press the CLEAR/OFF pad to clear the display if necessary. Remove the food from the oven. Remember, even though the oven shuts off automatically, foods continue cooking after the controls are off.

NOTE:

● The low temperature zone of this range (between

and

is available to keep hot cooked foods warm. Food kept in the oven longer than two hours at these low temperatures may spoil.

● Foods that spoil easily, such as milk, eggs, fish,

stuffings, poultry and pork, should not be allowed to sit for more than one hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure the oven light is off because heat from the bulb will speed harmful bacteria growth.

● A fan may automatically turn on and off to cool

internal parts. This is normal, and the fan may continue to run after the oven is turned off.

Page 20

ADJUST THE OVEN

DO IT YOURSELF!

You may feel that your new oven cooks differently than the one it replaced. We recommend that you

use your new oven for a few weeks to become more familiar with it, following the times given in your

recipes as a guide.

If you think your new oven is too hot or too cold,

you can adjust the thermostat yourself. If you think

it is too hot, adjust the thermostat to make it cooler. If

you think it is too cool, adjust the thermostat to make

it hotter.

We do not recommend the use of inexpensive thermometers, such as those found in grocery stores,

to check the temperature setting of your new oven. These thermometers may vary 20-40 degrees.

To Adjust the Thermostat:

press the

BAKE

2. Select an oven temperature between 500°F.

and

3. Immediately, before the BAKE indicator stops

flashing, press and hold the BAKE pad for about

4 seconds. The display will change to the oven

adjustment display.

4. The oven temperature can be adjusted up to

(+) INCREASE or DECREASE pads to select the desired change in the display.

CLEAR

OFF

NOTE: This adjustment will not affect the broiling or self-cleaning temperatures. It will be retained in memory after a power failure.

hotter or (-)

5. After you have made the adjustment,

press the CLEAR/OFF pad to go back to the time of day display. Use your oven as you would normally.

cooler. Use the

Page 21

Roasting is cooking by dry heat. Tender meat or poultry can be roasted uncovered in your oven. Roasting temperatures, which should be low and steady, keep spattering to a minimum.

Roasting is really a baking procedure used for meats. Therefore, oven controls are set for Baking or Timed Baking. (You may hear a slight clicking sound, indicating the oven is working properly.) Timed Baking will turn the oven on and off automatically.

Most meats continue to cook slightly while standing,

after being removed from the oven. The standing time

recommended for roasts is 10 to 20 minutes. This

allows roasts to firm up and makes them easier to

carve. The internal temperature will rise about 5° to

10”F.; to compensate for the temperature rise, if

desired, remove the roast from oven sooner (at 5° to

10”F. less than the temperature in the Roasting Guide).

Remember that food will continue to cook in the hot oven and therefore should be removed when the desired internal temperature has been reached.

1. Place the shelf in A or B position. No preheating

is necessary.

2. Check the weight of the

meat. Place the meat fat-side-up, or poultry breast-side-up, on roasting rack in a shallow pan. The melting fat will baste the meat. Select a as close to the (The broiler pan with rack is a good pan for this.)

3. Press the BAKE pad.

BAKE

of the meat as possible.

- —

4. Press the INCREASE or DECREASE

displayed.

Use of Aluminum Foil

The oven will start automatically. The word “ON” and “100°” will be displayed. As the oven heats up, the display will show the changing temperature. When the oven reaches the temperature you set, a tone will sound.

5. Press the

CLEAR

NOTE: A fan may automatically turn on and off to cool internal parts. This is normal, and the fan may continue to run after the oven is turned off.

To change the oven temperature during the roasting cycle, press the BAKE pad and then

the INCREASE or DECREASE pad to get the new temperature.

roasting is finished and then remove the food from the oven.

You can use aluminum foil to line the broiler pan. This makes clean-up easier when using the pan for marinating, cooking with fruits, cooking heavily cured meats or basting food during cooking. Press the foil tightly around the inside of the pan.

(continued next page)

Page 22

ROASTING

(continued)

Questions and Answers

Q. Is it necessary to check for doneness with a Q. Do I need to preheat my oven each time

meat thermometer?

A. Checking the finished internal temperature at the

completion of cooking time is recommended. Temperatures are shown in the Roasting Guide section. For roasts over 8 lbs., check with thermometer at half-hour intervals after half the cooking time has passed.

Q. Why is m~roast crumbling when I try to

carve it?

A. Roasts are easier to slice if allowed to cool 10 to

20 minutes after removing them from the oven. Be sure to cut across the grain of the meat.

I cook a roast or poultry?

A. It is not necessary to preheat your oven.

Q. When buying a roast, are there any special tips

that would help me cook it more evenly?

A. Yes. Buy a roast as even in thickness as possible,

or buy roiled roasts.

Q. Can I seal the sides of my foil “tent” when

roasting a turkey?

A. Sealing the foil will steam the meat. Leaving it

unsealed allows the air to circulate and brown

the meat.

ROASTING GUIDE

Frozen Roasts

Frozen roasts of beef, pork, lamb, etc., can be started without thawing, but allow 10 to 25 minutes per pound additional time (10 minutes per pound for roasts under 5 pounds, more time for larger roasts).

Make sure poultry is thawed before roasting. Unthawed poultry often does not cook evenly. Some commercial frozen poultry can be cooked successfully without thawing. Follow the directions given on the package label.

Oven

Type

Temperature

Doneness

Meat

Tender cuts; rib, high quality

sirloin tip, rump or top round*

Lamb leg or bone-in shoulder*

Veal shoulder, leg or loin*

Pork loin, rib or shoulder* Ham, precooked

325°

325° 325° 325°

Rare: Medium: Well Done: Rare: Medium: Well Done: Well Done: Well Done: To Warm:

Poultry

Chicken or Duck Chicken pieces

Turkey 325°

*For boneless rolled roasts over 6 inches thick, add 5 to 10 minutes per pound to times given above.

U. S. Department of Agriculture says “Rare beef is popular, but you should know that cooking it to only

food poisoning organisms may survive.” (Source: Safe Food Book. Your Kitchen Guide. USDA Rev. June 1985.)

325° 350°

Well Done: Well Done:

Well Done: 18-25

Approximate Roasting Time in Minutes per Pound

3 to 5

lbs.

24-33 35-39 40-45 30-35 21-25 25-30 30-35 28-33 35-45 3545

3 to 5 lbs.

35-40 30-35 3540

10 to 15 lbs. Over 15 Ibs. In thigh:

6 to 8 Ibs.

18-22

22–29 20-23

24-28 3040

30-40

Over 5 lbs.

15-20

Internal

Temperature “F.

140°–1500* 150°–1600 170°–1850

150°–1600 170°–1850 170°–1800

1700–1 80°

185°–1900 185°–1900

185°–1900

means some

Page 23

Broiling is cooking food by direct heat from above the food. Most fish and tender cuts of meat can be broiled. Follow these directions to keep spattering and

smoking to a minimum.

The oven door should be closed during broiling.

Turn the food only once during broiling. Time the

foods for the first side according to the Broiling

Guide. Turn the food, then use the times given for the second side as a guide to the preferred doneness.

1. If the meat has fat or gristle around the edge, cut

vertical slashes through both about 2“ apart. If desired, the fat may be trimmed, leaving layer about 1/8” thick.

2. Place the meat on the broiler rack on the broiler pan which comes with the range. Always use the rack so the fat drips into the broiler pan; otherwise the

juices may become hot enough to catch on fire.

3. Position the shelf on the recommended shelf

position as suggested in the Broiling Guide.

4. Close the oven door.

5. Press the BROIL pad.

BROIL

Use of Aluminum Foil

You can use aluminum foil to line your broiler pan and broiler rack. However, you must mold the foil tightly to the rack and cut slits in it just like the rack.

Without the slits, the foil will prevent fat and meat

juices from draining to the broiler pan. The juices

could become hot enough to catch on fire. If you do not cut the slits, you are frying, not broiling.

6. Press the INCREASE pad once for LO Broil or press the INCREASE pad twice for HI Broil.

change from HI Broil to LO Broil, press the

DECREASE pad once.

To change back to HI Broil, press the INCREASE pad once.

When broiling is completed, press the CLEAR/OFF

pad. Serve the food immediately, and leave the pan outside the oven to cool during the meal for easiest cleaning.

NOTE: A fan may automatically turn on and off to

cool internal parts. This is normal, and the fan may

continue to run after the oven is turned off.

Questions and Answers

Q. When broiling, is it necessary to always use a

rack in the pan?

A. Yes. Using the rack suspends the meat over the

pan. As the meat cooks, the juices fall into the pan, thus keeping meat drier. Juices are protected by the rack and stay cooler, thus preventing excessive spatter and smoking.

Q. Should I salt the meat before broiling? A. No. Salt draws out the juices and allows them to

evaporate. Always salt after cooking. Turn the meat with tongs; piercing the meat with a fork also allows the juices to escape. When broiling poultry or fish, brush each side often with butter.

Q. Do I need to grease my broiler rack to prevent

the meat from sticking?

A. No. The broiler rack is designed to reflect broiler

heat, thus keeping the surface cool enough to prevent the meat from sticking to the surface. However, spraying the broiler rack lightly with a vegetable cooking spray before cooking will make clean-up easier.

(continued next page)

Page 24

BROILING GUIDE

● Always use the broiler pan and rack that comes with

your oven. It is designed to minimize smoking and spattering by trapping the juices in the shielded lower part of the pan.

● Broiling should always be done with the oven

door closed.

● For steaks and chops, slash fat evenly around the

outside edges of the meat. To slash, cut crosswise through the outer fat surface just to the edge of the meat. Use tongs to turn the meat over to prevent piercing the meat and losing the juices.

●

If desired, marinate meats or chicken before broiling

or brush with barbecue sauce last 5 to 10 minutes only.

Food Bacon

Ground Beef

Well Done

1 lb. (4 patties) 1/2 to

inch thick

Beef Steaks

Rare Medium Well Done

Chicken

Bakery Product!

Bread (Toast) or Toaster Pastries English Muffins

Lobster Tails

Fish

Ham Slices

(precooked)

Pork Chops

Well Done

1 inch thick

(1 to

(2 to

1 whole (2 to split lengthwise

2 to 4 slices

1 pkg. 2 (split)

2-4 (6 to 8 oz. each)

l-lb. fillets 1/4 to

1/2 inch thick

1 inch thick

lbs.)

inch thick

lbs.)

lbs.),

2 (1/2 inch thick)

2(1 inch thick),

B B B

or D

c 13-16

B B

about 1 lb.

Lamb Chops

Medium Well Done

Wieners and similar sausages,

inch thick),

about 10 to 12 oz.

2(1

inch thick),

about 1 lb.

l-lb. pkg. (10)

B B

● When arranging food on the pan, do not let fatty

edges hang over the sides because dripping fat could

soil the oven.

● The broiler does not need to be preheated. However,

for very thin foods, or to increase browning, preheat if desired.

● Use LO Broil to cook foods such as poultry or thick

pork chops thoroughly without over-browning them.

● Frozen steaks can be broiled by positioning the oven

shelf at next lowest shelf position and increasing

cooking time given in this guide 1

First Side Second Side

8-9

12-13

28-30

2-3

6-7

7 5-6 8-9

6-7

9-12

16-18

18–20

1/2-1

3-4

Do not

turn over.

10-12 12-13

10 10

8 4--5

8-9

4-7

4-6

12-14

1–2

times per side.

Comments

Arrange in single layer

Space evenly. Up to 8 patties take about same time.

Steaks less than 1 inch thick cook through before browning. Pan frying is recommended. Slash fat.

Reduce time about 5 to 10 minutes per side for cut-up chicken. Brush each side with melted butter. Broil skin-side-down first.

Space evenly. Place English muffins cut-side-up and brush with butter, if desired.

Cut through back of shell. Spread open Brush with melted butter before and after half of

Handle and turn very carefully. Brush with lemon butter before and during cooking if desired. Preheat broiler to increase browning.

Increase time 5 to 10 minutes per side

inch thick or home cured ham.

for Slash fat.

Slash fat.

lengthwise; cut into 5- to 6-inch pieces.

time.

sausages in half

Page 25

OPERATING THE SELF-CLEANING OVEN

Quick Reminder:

1. Prepare the oven for cleaning.

2. Close the oven door.

3. Press the CLEAN pad.

4. Press the INCREASE or DECREASE pad to set the Clean Time.

Before a Clean Cycle

Normal Cleaning Time: 3 hours

The range must be completely cool in order to set the self-clean cycle.

We recommend venting with an open window or using a ventilation fan or hood during the first self-clean cycle.

1. Remove the broiler pan, broiler rack, all cookware and any aluminum foil from the oven—they can’t withstand the high cleaning temperatures.

NOTE: The oven shelves may be cleaned in the self-cleaning oven. However, they will darken, lose their luster and become hard to slide.

2. Wipe up heavy soil on the oven bottom. If you use soap, rinse thoroughly before self-cleaning to prevent staining.

Area Area

outside

gasket gasket

inside in door

Openings

Oven door

gasket

3. Clean spatters or soil on the oven front frame and

the oven door outside the gasket with a dampened cloth. The oven front frame and the oven door outside the gasket do not get cleaned by the clean cycle. On these areas, use detergent and hot water or a soap-filled steel wool pad. Rinse well with a vinegar and water solution. This will help prevent a brown residue from forming when the oven is heated. Buff these areas with a dry cloth. Do not clean the gasket.

Do not use abrasives or oven cleaners. Clean the top, sides and outside front of the oven door with soap and water.

Make sure the oven light bulb cover is in place. Do not rub or clean the door gasket—the

fiberglass material of the gasket has an extremely low resistance to abrasion. An intact well-fitting oven door gasket is essential for energy-efficient oven operation and good baking results. If you notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door, you should have it replaced.

Do not let water run down through openings in the top of the door. To help prevent water from getting in these slots when cleaning, open the door as far as it will go.

4. Close the oven door and make sure the oven light is off. If the oven light is not turned off, the life of the bulb will be shortened or it may burn out immediately. The door latches automatically after the clean cycle is set.

Do not use commercial oven cleaners or oven protectors in or near the self-cleaning oven.

A combination of any of these products plus the high clean-cycle temperature may damage the porcelain finish of the oven.

(continued next page)

Page 26

OPERATING THE SELF-CLEANING OVEN

How to Set Oven for Cleaning

(continued)

Quick Reminder:

1. Prepare the oven for cleaning.

2. Close the oven door.

3. Press the CLEAN pad.

4. Press the INCREASE or DECREASE pad to set the clean time.

1. Follow steps to prepare the oven for cleaning.

2. Close the oven door. press the CLEAN

CLEAN

To Stop a Clean Cycle

4. Press the INCREASE or DECREASE pad until the desired Clean Time is displayed.

Clean Time is normally 3 hours. You can change the Clean Time to any time between 2 and 4 hours, depending on the amount of soil in your oven.

The self-clean cycle will automatically begin after “CLEAN” is displayed and the word “ON” appears in the display. When the oven heats to a high temperature, the word “LOCK” will appear in the display. It will not be possible to open the oven door until_ the LOCK cooled below locking temperature.

NOTE: A fan may automatically turn on and off to cool internal parts. This is normal, and the fan may continue to run after the oven is turned off.

goes off and the oven has

1. Press the CLEAR/OFF pad.

2. When the LOCK light goes off and the oven has cooled below the locking temperature, open the door.

After a Clean Cycle

When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK” goes out and the door can be opened.

When the LOCK light is off and the oven has cooled below the locking temperature, open the door.

After a clean cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth.

If white spots remain, remove them with a soap-filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, the cycle may be repeated.

If the shelves have become hard to slide, wipe the shelf supports with cooking oil.

Page 27

How to Set Delay Start of Cleaning

Delay Start is setting the oven timer to start the clean cycle automatically at a later time than the present time of day.

NOTE: Before beginning make sure the oven clock shows the correct time of day.

For example: Let’s say it’s

oven to begin self-cleaning at finished in the kitchen. The oven is just soiled a normal amount so the normal Clean Time of 3 hours is preferred.

1. Prepare the oven for cleaning.

2. Close the oven door. Make sure the oven light

is off.

3. Press the CLEAN pad.

CLEAN

4. Press the INCREASE cleaning time is automatically set.

5. If a longer or shorter Clean Time is desired, press the INCREASE or DECREASE pad until the desired Clean Time is displayed.

STOP TIME

6. Press the STOP TIME pad. appears in the display and “STOP TIME” flashes. The control automatically sets the Stop Time by adding the Clean Time to the time of day.

In this example, the time of day is and the Clean Time is 3 hours. Adding 3 hours to the time of day equals

and you want the

after you’re

Three hours

Quick Reminder—Delay Start for Self-Clean:

1. Prepare the oven for cleaning.

2. Close the oven door.

3. Press the CLEAN pad.

4. Press the INCREASE or DECREASE pad until the desired Clean Time appears.

5. Press the STOP TIME pad.

6. Press the INCREASE or DECREASE pad until the desired Stop Time appears in the display.

7. Change the Stop Time from pressing the INCREASE pad until in the display. The words “DELAY CLEAN” will also appear in the display.

The self-clean cycle will automatically begin at and finish at display at

When the oven heats to a high temperature, the word “LOCK” will be displayed and the door will be locked in position. It will not be possible to open the oven door until the temperature drops below the lock temperature.

When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature the word “LOCK” goes out and the door can be opened.

8. When the LOCK light is off, open the door.

NOTE: A fan may automatically turn on and off to cool internal parts. This is normal, and the fan may continue to run after the oven is turned off.

The word “ON” will appear in the

(continued next page)

by appears

Page 28

OPERATING THE SELF-CLEANING OVEN

Questions and Answers

(continued)

Q. If my oven clock is not set to the correct time of

day, can I still self-clean my oven?

A. If the clock is not set to the correct time of day you

will not be able to set a delay clean to end at a specific time.

Q. Can I use commercial oven cleaners on any part

of my self-cleaning oven? No cleaners or coatings should be used around any

part of this oven. If you do use them and do not thoroughly rinse the oven with water, wiping it absolutely clean afterwards, the residue can scar the oven surface and damage metal parts the next time the oven is automatically cleaned.

, What should I do if excessive smoking occurs

during cleaning?

This is caused by excessive soil. Press the

room of smoke. Wait until the oven has cooled and the word “LOCK” is off in the display. Wipe up the excess soil and reset the clean cycle.

Q. Is the “crackling” or “popping” sound I hear

during cleaning normal?

A. Yes. This is the sound of the metal heating and

cooling during both the cooking and cleaning

functions. Q. Should there be any odor during the cleaning? A. Yes, there will be an odor during the first few

cleanings. Failure to wipe out excessive soil might also cause a strong odor when cleaning.

Q. What causes the hair-like lines on the enameled

surface of my oven?

A. This is a normal condition, resulting from heating

and cooling during cleaning. These lines do not affect how your oven performs.

Q. Why do I have ash left in my oven after

cleaning?

Some types of soil will leave a deposit which is ash

It can be removed with a damp sponge or cloth.

Q. My oven shelves do not slide easily.

What is the matter?

A. After self-cleaning, the oven shelves will lose

their luster and become hard to slide. To make the shelves slide more easily, wipe the shelf supports with cooking oil.

Q. My oven shelves have become gray after the

self-clean cycle. Is this normal?

A. Yes. After the self-clean cycle, the shelves will

lose some luster and discolor to a deep gray color.

Q. Can I cook food on the cooktop while the oven

is self-cleaning?

A. Yes. While the oven is self-cleaning, you can use

the cooktop just as you normally do.

Page 29

Proper care and cleaning are important so your range will give you efficient and satisfactory service. Follow these directions carefully in caring for your range to assure safe and proper maintenance.

Burner Assembly

The burner assemblies should be washed regularly and, of course, after

Turn all the controls to OFF before removing the burner parts.

The electrode of the spark igniter is exposed beyond the top of the burner. When cleaning the burner bowl, be careful not to snag the

electrode of the spark igniter with your cleaning cloth. Be careful not to turn on any cooktop controls while cleaning the burner bowls. A slight electrical shock might result which could cause you to knock over hot cookware.

The burner grates, burner tops and trim rings can be lifted off, making them easy to clean. Removing them gives you access-to the burner bodies and burner bowls. (To avoid snagging cloth on spark igniters,

burner tops in place when cleaning burner bowls.) There is a locating pin indentation at the bottom of the bowls. The pin allows the grate to sit level in one direction only. Do not remove the pin. Do not remove the burner bowls from glass top units. Clean the burner grates, caps, and bowls with abrasive cleaners or soap filled steel wool pads. Soak stubborn soil. Dry them with a cloth—don’t reassemble them wet.

To reassemble: Place the trim ring onto the burner body first. Before replacing the burner top, first examine the two tabs on its underside. The tabs are to fit into receiving slots in burner head. When replacing burner grate, make sure the bottoms of the four larger burner grate fingers fit into the corresponding indentations in the burner bowl.

fits into an

BE SURE ELECTRICAL POWER IS OFF BEFORE CLEANING ANY PART OF THE RANGE.

Burner

Burner Bowl

CAUTION: DO NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS IN PLACE.

(continued next page)

Page 30

Burner Grates

CARE AND CLEANING

(continued)

Porcelain enamel burner grates should be washed regularly and, of course, after

Wash them in hot, soapy water and rinse with clean water. You may also use abrasive cleaners and steel wool pads to clean burner grates. Dry the grates with a cloth—don’t put them back on the range wet. When replacing the grates, be sure they’re positioned

over the burners.

Control Panel and Knobs

It’s a good idea to wipe the control panel after each

Clean with mild soap and water or vinegar and

use.

water, rinse with clean water and polish dry with a soft cloth.

Do not use abrasive cleansers, strong liquid cleansers, plastic scouring pads or oven cleaners on the control panel–they will damage the finish. A 50/50 solution of vinegar and hot water works well.

The control knobs may be removed for easier cleaning. Before removing the knobs for cleaning, please note that the knobs on the left side and the knobs on the right side are in the proper OFF position. When replacing the knobs, check the OFF position to insure proper alignment.

To get rid of burned-on food, place the grates

in a covered container or plastic bag. Add 1/4 cup

ammonia and let them soak for 30 minutes. Wash,

rinse well, and dry. Although they’re durable, the grates will gradually

lose their shine, give them. This is high temperatures.

Do not operate a burner for an extended period

of time without cookware on the grate. The finish

on the grate may chip without cookware to absorb the

heat.

To remove a knob, pull it straight off the stem. If a knob is difficult to remove, place a thin cloth (like a

handkerchief) or a piece of string under and around

the knob edge and pull up.

Wash the knobs in soap and water but do not soak.

Avoid getting water into the knob stem holes.

of the best care

can

Cooktop Glass

To keep the cooktop looking its best, wipe up any

spills as they occur. This will keep them from burning on and becoming more difficult to remove.

As soon as the cooktop is cool, wash the glass surface with a cloth moistened with warm, soapy water; rinse with clean water, and dry with a soft cloth. You can use any liquid household detergent. Do not use abrasive materials such as metal pads, cleansing powder and soap filled pads—they may scratch the surface. Do not use harsh chemicals such as bleach or chemical oven cleaners.

For streaks or spotting, you may find it helpful to rinse glass with white vinegar or a fifty percent white vinegar/water solution.

~..... -

. .

Page 31

Lift-Off Oven Door

The oven door is removable, but it is

heavy. You may need help removing and replacing the door. Do not lift the door by the handle. This can cause the glass to break or can cause damage to the door.

To remove the door, open it a few inches to the special stop position that will hold the door open. Grasp firmly on each side and lift the door straight up and off the hinges.

NOTE:

● Be careful not to place hands between the hinge and

the oven door frame as the hinge could snap back and pinch fingers.

● While working in the oven area, cover the hinges

with towels or empty paper towel rolls to prevent pinched fingers and chipping the porcelain enamel on the frame.

To replace the door, make sure the hinges are in the special stop position. Position the slots in the bottom of the door squarely over the hinges. Then lower the door slowly and evenly over both hinges at the same

If hinges snap back against the oven frame, pull

hem back out. TO CLEAN THE DOOR: Inside of the door:

● Because the area inside the gasket is cleaned during

the self clean cycle, you do not need to clean this by hand. Any soap left on the liner causes additional

stains when the oven is heated.

● The area outside the gasket can be cleaned with a

scouring pad.

● Do not rub or clean the door gasket—the fiberglass

material of the gasket has an extremely low resistance to abrasion. An intact and well-fitting oven door gasket is essential for energy-efficient oven operation and good baking results. If you

notice the gasket becoming worn, frayed or damaged in any way or if it has become displaced on the door,

you should have it replaced.

NOTE: The gasket is designed with a gap at the bottom to allow for proper air circulation.

Inside Gasket

Gasket

Outside Gasket

Outside of the door:

● Use soap and water to thoroughly clean the top,

sides and front of the oven door. DO NOT let water run down through openings in the top of the door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door.

● Spillage of marinades, fruit juices, tomato sauces

and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

● Do not use oven cleaners, cleansing powders or

harsh abrasives on the outside of the door.

Removable Storage Drawer

The storage drawer is a good place to store cookware

and bakeware. Do not store plastics and flammable material in the drawer.

Do not overload the storage drawer. If the drawer is too heavy, it may slip off the track when opened. To open the drawer, grasp the center of the handle and pull straight out.

The storage drawer may be removed for cleaning

under the range. To remove: Pull the drawer straight out and lift

the guide stops.

To replace: Lift over the guide stops and slide the drawer into place.

To clean both the inside and the outside:

Wipe with soap and water. Rinse well.

Do not use cleansing powders or harsh abrasives which may scratch the surface.

(continued next

Page 32

CARE AND

(continued)

Oven Shelves

Clean the shelves with an abrasive cleanser or steel

wool. After cleaning, rinse the shelves with clean water

and dry with a clean cloth. NOTE: The oven shelves may also be cleaned in the

self-cleaning oven, however, the shelves will darken in color, lose their luster and become hard to slide if cleaned during the self-cleaning cycle. Wipe the shelf

supports with cooking oil to make the shelves slide

more easily.

Broiler Pan and Rack

After broiling, remove the broiler pan and rack from

the oven. Remove the rack from the pan. Carefully pour the grease from the pan into a proper container. Wash and rinse the broiler pan and rack in hot water with a soap-filled or plasti~ scouring pad.

If food has burned on, sprinkle the rack with detergent while hot and cover with wet paper towels or a dishcloth. Soaking the pan will remove burned-on foods.

The broiler pan may be cleaned with a commercial oven cleaner. Do not use an oven cleaner on the rack.

CLEANING

Do not store a soiled pan and rack anywhere in the range.

Both the broiler pan and rack can also be cleaned in the dishwasher.

Do not clean the broiler pan or rack in the self-

cleaning oven.

Oven Vent

The oven is vented through an opening at the rear of the cooktop. Never cover the opening with aluminum foil or any other material. This would prevent the oven vent from working properly.

Painted Surfaces

The drawer front is a painted surface. Clean it with soap and water or a vinegar and water solution.

Do not use commercial oven cleaners, cleansing powders, steel wool or harsh abrasives on any painted surface.

Sure Grip Handle

The soft door handle is easy to keep clean. easily wash off with soap and water or a non-abrasive cleaner. Avoid using heavy-duty all-purpose cleaners

and detergents, as they may contain chemicals which

might harm the sure grip handle.

will

The vent grille may discolor during self-cleaning. Clean the oven vent grille with Bon Ami.

Page 33

Light Bulb

The light bulb is located on the back oven wall. Before replacing the bulb, disconnect the electric power to the range at the main fuse or circuit breaker panel or unplug the range from the electric outlet. Let the bulb cool completely before removing it. Do not touch a hot bulb with a damp cloth. If you do, the bulb will break.

TO REMOVE:

● Remove the 3 screws in the light cover.

● Detach the light cover and remove the bulb.

TO REPLACE:

● Put in a new 40-watt appliance bulb.

NOTE: A 40-watt appliance bulb is smaller than a standard 40-watt household bulb.

● Install the light cover. Replace the 3 screws and

tighten, making sure the cover fits flush with the oven wall.

● Reconnect the electric power to the range.

Removable Oven Bottom

Gasket

“he

oven bottom can be removed to clean large spills, and to enable you to reach the oven burner. The oven bottom must be replaced before using the self-clean cycle.

Unlock

Lock

To remove:

1. Slide the tab at the center front of the oven bottom

to the left.

2. Lift the oven bottom up and out. To replace:

1. Slip the oven bottom into the oven so the tabs in

the rear of the oven bottom fit into the slots in the oven back.

2. Lower the front of the oven bottom into place and

slide the front tab to the right to lock the oven bottom into place.

The oven bottom has a porcelain enamel finish.

To make cleaning easier, protect the oven bottom from excessive spillovers. This is particularly important when baking a fruit pie or other foods with high acid content. Hot fruit fillings or foods that are acidic (such as milk, tomatoes or sauerkraut, and sauces with vinegar or lemon juice) may cause pitting and damage to the porcelain enamel surface.

To protect the oven bottom surface, place a piece of aluminum foil slightly larger than the baking dish or a small cookie sheet on a lower shelf or under the baking dish to catch any spillovers. It should not completely cover the shelf as this would cause uneven heat in the oven. Aluminum foil should not be placed on the oven bottom.

If a spillover does occur on the oven bottom, allow the oven to cool first. You can clean the oven bottom with soap and water, a mild abrasive cleanser or filled abrasive pads. Rinse well to remove any soap before self-cleaning.

Page 34

ANTI-TIP DEVICE

Before placing range in the counter, notice the location of the stability bracket which is already attached to the back of the range. This location should work for most installations. However, it may

be more convenient to hook the stability chain to

the unit when the stability bracket is attached to

the upper set of holes in the back of the range. See Fig. A. The upper level set of holes are intended for

use with a backsplash kit. If the backsplash is not

being used, make sure that there are no structural

supports for the countertop which will interfere with the stability bracket when located in the

upper set of holes.

guard

Bracket Optional Location

Bracket Location

Chain

Long Screw

Washer \

Wall Plate

3. Temporarily attach the loose end of the chain

to the rear of the countertop with the tape from

the packaging. See Fig. D.

4. Place the range in the counter cutout leaving just enough room between the back of the range and

wall to reach the stability bracket.

5. Hook the loose end of the chain onto the bracket by slipping the nearest link of the chain into the

slot in the bracket. See Fig. A and make sure the chain is pulled as tight as possible and that there

is no excess slack in the chain after the chain is

attached to the bracket.

CAUTION: Excessive slack in the chain

could allow the range to tip over.

2. Fasten one end of

the stability chain to the floor or wall with the long screw and washer supplied. See

Fig. B. Make certain

Washer and Screw

the screw is going into the wall

the base of the wall or one of the studs in the base

of the wall. See Fig. C. Whether you attach the chain to the wall or floor, be certain that the screw is in at least 3/4 inch thickness of wood other than baseboard and that there are no electrical wires or plumbing in the area which the screw could penetrate. Attach the stability chain in a location which will allow the chain to be in line with the

bracket side to aide as much as possible when

attached to the unit. Test to see if the chain is securely fastened by tugging on the chain.

Chain

6. Slide the range all the way back into the counter. Once the be a small a~oun{of slack in the

back in

there This

is normal.

NOTE:

● If attaching to masonry, you can buy suitable

and anchors at hardware stores. Use a masonry dril

to drill the required holes.

● If range is removed for cleaning or any other

make sure chain is reattached.

Page 35

Broil and Oven Burner Air Adjustment Shutters

Air adjustment

Loosen

shutters for the broil and oven burners regulate the flow of

Air adjustment shutter

air to the flame. The air adjustment

shutter for the top burner is on the rear wall of the oven.

The shutter for the bottom burner is near the

oosen

back wall behind the

storage drawer.

To ad.iust the flow of

air to-either burner,

loosen the Phillips head .

screw and rotate the

shutter to allow more or

. . . . .

%,&..

less air into the burner tube as needed.

..\

The flames for the top (broil) burner -

with approximately

1“ blue cones and

should not extend out over the edges of the burner baffle.

To determine if the bottom burner flames are proper, remove the oven bottom (see Care and Cleaning section) and the burner baffle. The flames should have 1/2” to

3/4” blue cones with no yellow tipping. When the baffle is back in place, the flames will resettle.

Visually check the color of the flames every six months. If they look like illustration (A) in the Problem Solver section of this guide, call for service.

burn steady

Cooktop Burner

Make sure the burners are assembled correctly as

shown in the Care and Cleaning section. Turn each burner on all the way. Flames should be blue in color with no trace of yellow. Foreign particles in the gas line may cause an orange flame at first but this will soon disappear. The burner flames should not flutter or blow away from the burner. The inner cone of the flame, should be between 1/2” and 3/4” long.

3/4”

Page 36

QUESTIONS?

USE THIS PROBLEM SOLVER

PROBLEM “F-”

AND

FLASH IN

BURNERS

DISPLAY

YELLOW OR

YELLOW-TIPPED FLAMES

SURFACE BURNER KNOBS

WILL NOT TURN T(?P BURNERS

TICKING SOUND OF SPARK

POSSIBLE CAUSE

If the time display flashes “F-”

Press the

pad.

and a

the oven to cool for one

you have a function error code.

Put the oven

back into operation. If the failure code repeats, disconnect all power to the

range. Call-for service.

flames—

for service

tip on

for LP gas

call for service. Normal burner flames should

look like

● With LP

or (C), depending on the type of gas

some

use.

is normal.

To turn from OFF position, push the knob in and then turn.

●

Make sure electrical

● Gas

not connected or not turned on.

is plugged into a live, properly grounded power outlet.

*Check for power outage.

●

Pan sitting on burner grate may be partially blocking the free air flow needed

for combustion. Remove pan and try again.

● Igniter orifice in burner body may be clogged. Refer to the Care and

Cleaning section. Remove the obstruction.

● Burner parts not replaced correctly.

●

Hole in

top behind igniter may be clogged. Use a small sewing

to the Care and Cleaning section.

needle to unplug.

●

Spark igniter not deactivated. Turn burner off arid relight. Some ticking is

normal. If ticking is excessive, call for service.

FLAMES VERY

YELLOW

FOOD DOES NOT

PiOPERLY

FOOD DOES

ROAST

BAKE PROPERLY

● If range is connected to LP gas, check all steps in the Installation Instructions.

●

The oven controls are not properly set. See the Broiling section.

The door is not closed,

*Improper shelf position is being used. See the Broiling section.

● Food is being cooked on a hot pan.

●

Cookware is not suited for broiling.

Oven

bottom

not securely seated

position.

Aluminum foil used on the broiler rack has not @en fitted properly and slit,

as recommended.

*The oven controls are

● Shelf position is incorrect.

Roasting section.

Improper cookware is being used.

*Oven thermostat needs adjustment. See the Adjust the Oven

●

not set correctly.

* Aluminum foil used improperly in the oven.

● Oven bottom not securely seated in position.

Page 37

PROBLEM

POSSIBLE CAUSE

OVEN TEMPERATURE

HOT OR TOO COLD

CONTROL SIGNAL AFTER ENTERING OVEN TIME OR STOP TIME

BUT COOKTOP DOES OVEN NOT CLEAN

AFTER CLEAN CYCLE

STRONG ODOR

OVEN LIGHT DOES NOT COME ON

OVEN WILL NOT

SELF-CLEAN

“BURNING” OR “OILY” ODOR EMITTING FROM

WHEN

FAN NOISE

CLOCK AND TIMER

DO NOT WORK

*Oven

*This

●

thermostat reminding

shutoff valve

is in

“

a bake, temperature.

regulator of self-cleaning

●

controls

●

Heavily

*Heavy

●

● An odor from the insulation

first few

●

*Electrical plug

ah-/gas ratio in

may be

*Stop’ *Oven temperature

cool

●

This is normal

set a Cleaning Oven

●

A fan rnav

and

*Make sure

power outlet.

for power outage.

the Oven Control, (lock’ and

properly.

require

should be cleaned

You

the oven

must

Make

used. This is temporary.

or burned out.

plugged

is broken. Call for service.

3 hours

high to

and

a new

and will disappear in

a minimum of 3 hours. Seethe

turn on and off to

the

electrical plug is plugged into a

to run after

See the

4-hem

Adjust

shutoff

shut

of the oven is

live

than Start Time.

self-clean operation.

oven

section.

turned &.

clean

air

outlet.

internal

speed the process,

See the

the ’Self-

This

grounded

“

for

If you need more help... call, toll free:

GE Answer Center”

800.626.2000 consumer information service

Page 38

NOTES

Page 39

There

With the purchase of your new GE appliance, receive

assurance that ifyou ever need

information or assistance from GE, we’ll be there. All you have to do is

Repair Service

AGE consumer service professional will provide expert repair service, scheduled at a time that’s convenient for you. Many GE Consumer Service company-operated locations offer you service today or tomorrow, or at your convenience

Our factory-trained technicians know your appliance inside and out–so most repairs can be handled in just one visit.

8011626.20170

Whatever your question about any GE major appliance, GE Answer Center@ information service is available to help. Your call—and your question-will be answered promptly and courteously. And you can call any time. GE Answer Center” service is open

For Customers

SpecialNeeds...

8006262000

Upon request, GE will provide Consumers with impaired hearing or speech who have Braille controls for a variety of access to a TDD or a conventional teletypewriter may

GE appliances, and a brochure to call assist in planning a barrier-free information or service.

kitchen for persons with limited mobility. To obtain these items, free of charge, call 800.626.2000.

Service

8096262224

You can have the secure feeling that GE Consumer Service will still be there after your warranty expires. Purchase a GE contract while your warranty is still in effect and you’re assured of future service at today’s prices.

8006262002

Individuals qualified to service their own appliances

home. The GE parts system provides access to over

47,000

parts... and

fully warranted. VISA, MasterCard and Discover cards are accepted.

GE Genuine Renewal Parts are

User maintenance instructions contained in this booklet

cover procedures intended to be performed by any user. Other servicing

service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

be referred to qualified

Page 40

YOUR GE GAS RANGE

WARRANTY

Staple sales slip or

check

here. Proof of original purchase date

is needed to obtain service

under warranty.

WHAT IS COVERED

WHAT IS NOT COVERED

FULL ONE-YEAR WARRANTY

For one year from date of original purchase, we

charge, parts and service labor in your home to repair or replace

any parf of

because of a manufacturing defect.

● Service trips to your home to

teach you how to use the product.

Read your Use and Care material.

If you then have any questions about operating the product, please contact your dealer or our Consumer Affairs office at the address below, or call, toll free:

GE Answer

800.626.2000 consumer information service

● Improper installation.

If you have an installation problem, contact your dealer or installer.

You are responsible for providing

adequate electrical, gas, exhausting

and other connecting facilities as

will provide, free of

range

that fails

This warranty is extended to the original purchaser and any succeeding owner for products

purchased for ordinary home use in the 48 mainland states, Hawaii and Washington, warranty is the same except that it is LIMITED because you must pay to ship the product to the service shop or for the service technician’s travel costs to your home.

All warranty service will be provided by our Factory Service Centers or by our authorized Customer normal working hours.

Should your appliance need service, during the warranty period or beyond, call 800-GE-CARES (800-432-2737).

described in the Installation Instructions provided with the product.

●

Replacement of house fuses or

resetting of circuit breakers.

●

Failure of the product if it is used for

other than its intended purpose or used commercially.

●

Damage to product caused by

accident, fire, floods or acts of God.

WARRANTOR IS FOR CONSEQUENTIAL DAMAGES.

In Alaska the

servicers during

NOT

RESPONSIBLE

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion

may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.

Recycled Paper

164D2966P046

Pub No, 49-8518

6-94 CG

Warrantor: General Electric Company

if further help is needed concerning this warranty, write:

Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225

Printed in LaFayette, (