JGP656BBBB—GE Profile™36” Downdraft Gas Cooktop
Dimensions (in inches)
Specification Created 2/00
For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile™or GE appliance questions, call
GE Answer Center®service, 800.626.2000.
JXBC57 Outdoor Cover:
Optional accessory may be ordered for installation of
motor and blower assembly on outside wall
JXRB57 Remote Installation Kit:
Optional accessories may be ordered for installation
below the floor.
Note: See following pages for additional information.
Important Information: Cooktop is shipped
separately. JXBA56BB or JXBA56WW (motor, blower
and downdraft housing assembly required) must be
ordered with cooktop.
Electrical Rating: 120V, 60Hz, 5A
A minimum 36” side-to-side undercounter clearance is
required for ease of installation. Units are furnished
with a 4-foot, 110V electric cord.
Installation Information: Before installing, consult
installation instructions, packed with product, for
current dimensional data.
1-1/4" To
rear wall
2-1/4" MIN. to
front edge of counter
4" MIN. to side wall
both sides
34-9/16
19
21
2
34
JGP656BBBB—GE Profile™36” Downdraft Gas Cooktop
Gas and Electrical Supply Location Dimensions (in inches)
Specification Created 2/00
For answers to your Monogram,
®
GE Profile Performance Series,
™
GE Profile™or GE appliance questions, call
GE Answer Center®service, 800.626.2000.
4
14
19
Power receptacle
Gas inlet
Electrical Rating: 120V, 60Hz, 5A
Gas and Electrical Supply Location: The gas
supply pipe and the electrical supply receptacle
entering the cabinet should be positioned as shown
in the shaded areas. The cooktop is equipped with a
4' power supply cord and should reach any desired
location on cabinet walls.
Installation Information: Before installing, consult
installation instructions, packed with product, for
current dimensional data.
13"
MAX.
36" MIN.
18" MIN.
†
8-13/16"
MIN.
*Clearance to cabinet above cooktop
†
AGA Requirement
30" MIN.*