GE Appliances
JGP626BEV—Built-In Gas Cooktop
Dimensions (in inches)
36
Cooktop
33-7/8
3-1/4
21
19-1/16
Counter Installation Dimensions (in inches)
13" MAX.
depth
30" MIN. to
unprotected
cabinet
2-1/4" to
rear wall
3-3/4" MIN.
clearance to
side wall
Electrical junction
box 12" MIN.
below countertop
Note: Allow 5-3/4" depth
at rear for electrical
and gas connections
For answers to your GE Monogram,™GE Profile,
GE, Hotpoint and RCA appliance questions, call
GE Answer Center®service, 800.626.2000.
18" MIN.
to cabinet
3-3/4" MIN.
clearance to
side wall
Cut should
not interfere
with cabinet
structure at
front
™
AGA Requirement: All gas cooktop models required 3-1/2"
free area below countertop surface to combustible material.
Requires 18" minimum from cooktop to adjacent overhead
cabinets.
Note: If installing a gas sealed burner model with a GE
Telescopic Downdraft System, consult both cooktop and
downdraft installation instructions packed with product
before installing. Cooktop gas/electric supply may need
to be re-routed to install downdraft.
Electrical Rating: 120V, 60Hz, 5A
Installation With Single Wall Oven Information:
30" Gas Cooktops are approved for use over select GE 27"
Wall Ovens. 30" and 36" Gas Cooktops are approved for use
over select 30" Wall Ovens. Refer to cooktop and wall oven
installation instructions, [Pub. No. 31-10167 (JKP18AV/17WV/
16GV/15AV/14WV/13GV, JKS05GV); Pub. No. 31-10125
(JTP18AV/17WV/16GV/14WV/13GV)] packed with product for
current dimensional data.
Installation Information: Before installing, consult
installation instructions [Pub. No. 31-10169] packed with
product for current dimensional data.
Revised 3/96
GE Appliances
JGP626BEV—Built-In Gas Cooktop
Features and Benefits
•Black on black Model
• 36" Porcelain-Enameled Cooktop
• Sealed Cooktop Burners
• Precise Simmer Burner
• Electronic Pilotless Ignition
• Standard Cast Grates
• Up-Front Controls
• Also Available In White on white as Model JGP626WEV and In Almond on almond
as Model JGP626AEV
Revised 3/96