GE JGP336AED, JGP336BED, JGP336CED, JGP336WED Specification

0 (0)
GE JGP336AED, JGP336BED, JGP336CED, JGP336WED Specification

GE Appliances

JGP336AED/BED/CED/WED—GE 30” Built-In Gas Cooktop

Dimensions (in inches)

Counter Installation Dimensions (in inches)

30

21

 

 

 

Cooktop

2-1/2

13" MAX.

 

 

depth

19-5/8

30" MIN. to

 

unprotected

 

cabinet

28-1/2

2-1/4" to

 

rear wall

2-1/2"

(min.)

3-3/4" MIN. clearance to

side wall

Electrical junction box 12" MIN. below countertop

18" MIN.

to cabinet 3-3/4" MIN. clearance to

side wall

Cut should not interfere with cabinet structure at front

AGA Requirement: All gas cooktop models required 7/16" free area below cooktop height to combustible material. 0” Clearance is required between left and right sides of cooktop below countertop. Requires 18" minimum from countertop to adjacent overhead cabinets.

Note: If installing with a GE Profile™ Telescopic Downdraft System, consult both cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/electric supply may need to be re-routed to

install downdraft.

Electrical Rating: 120V, 60Hz, 5A

Installation With Single Wall Oven Information:

30" Gas Cooktops are approved for use over select GE 27" Wall Ovens. 30" and 36" Gas cooktops are approved for use over 30" Wall Ovens. Refer to cooktop and wall oven installation instructions packed with product for current dimensional data.

Installation Information: Before installing, consult installation instructions, packed with product, for current dimensional data.

Optional Gas Range Wok Accessory

(Available at Additional Cost)

JXWK-Wok Accessory sits on top of maximum burner grate to hold a round bottom wok.

For answers to your Monogram,® GE Profileor GE appliance questions, visit our website at GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

Specification Created 8/01

Loading...
+ 1 hidden pages