JDS28DF
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
30
27-1/2
25
23-3/16
If necessary,
build up sides
to 1-1/4" thick
to provide
countertop
support
28-1/2
DROP-IN ELECTRIC RANGE
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
2-7/8"
To Front Surface
of Countertop
30
27-1/2
25
23-3/16
If necessary,
build up sides
to 1-1/4" thick
to provide
countertop
support
27
20-5/8" Door
Clearance
From Front
Surface of
Countertop
24
31-1/4
30
4
Accessory
Backguard
JXS32
28-1/2
23-3/16
30
If you are NOT using the
Filler strip or Backguard:
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
30" Min.
30" Min.
15" Min.
Recommended
6" Min.
from walls
30
27-1/2
25
23-3/16
If necessary,
build up sides
to 1-1/4" thick
to provide
countertop
support
30
4
Accessory
Backguard
JXS32
28-1/2
GE Appliances 30" Drop-In Electric Range
with Standard Clean Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
JUNCTION BOX LOCATION: Electric drop-ins are not approved for
installation with a plug and receptacle. This range is supplied with a flexible
conduit and must be hard wired to a junction box. See shaded area in drawing for
location of junction box. Refer to installation instructions for more information.
IMPORTANT: 30" DROP-IN RANGES ARE DESIGNED TO HANG
FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR.
FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION
INSTRUCTIONS.
NOTE: This appliance has been approved for 0" spacing to adjacent
surfaces above the cooktop. However, a 6" minimum spacing to surfaces less
than 15" above the cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
OPTIONAL KITS FOR DROP-IN ELECTRIC RANGES: (Available At
Additional Cost)
ACCESSORY BACKGUARDS:
(Attaches to the back of range
as a backguard when unit is installed
in 30" free-standing cutout)
JXS32SS (Stainless) - 4" High
JXS32BB (Black) - 4" High
REAR FILLER STRIP:
WB07T10680 - Black Filler Strip Assembly
INSTALLATION INFOR M ATION : Before
installing, consult installation instructions
for current dimensional data and additional
requirements.
†
NOTE: Check local codes for required breaker size.
If you are using the
Filler strip or Backguard:
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
25
30
KW RATI N G
240V 10.8
208V 8.1
BREAKER SIZE
24 0V 40 Amps
208V 40 Amps
If you are NOT using the
Filler strip or Backguard:
†
†
23-3/16
30
Above illustration intended for dimensional reference only.
Refer to photograph for actual product appearance.
24
2-7/8"
To Front Surface
of Countertop
20-5/8" Door
Clearance
From Front
Surface of
Countertop
Dimension and installation information are shown in inches.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
31-1/4
25-3/4*
(excluding handle)
Accessory
Backguard
30
27
*Total depth from wall to
front of closed oven door
including handle is 28-1/2.
Speci fication Rev ised 3/16
JXS32
4
Listed by
Underwriters
Laboratories
JDS28DF
GE Appliances 30" Drop-In Electric Range
with Standard Clean Oven
FEATURES AND BENEFITS
Coil heating elements - Provide even heat and easy cleanup
Electronic oven controls - Electronic touch pads are easy to operate
4.4 cu. ft. oven capacity - Enough room to cook an entire meal at once
Standard clean oven - Smooth surface and rounded corners make clean-up quick
and easy
Chrome drip bowls - Contain spills and remove for easy cleaning
Model JDS28DFWW - White on white
LIGHT
Speci fication Rev ised 3/16