GE JBP82BF, JBP82CF, JBP82KF, JBP82SF, JBP82TF Specification

GE Appliances

JBP82BF/CF/KF/SF/TF/WF–GE 30" Free-Standing CleanDesign Electric Range

Dimensions and Installation Information (in inches)

	30
	2-1/2
	25
Acceptable electrical	2-1/2
outlet area

29-7/8

7-1/2

44-7/16

Preferred electrical outlet area Roughed-in dimensions

25-3/8*

47-5/8

KW Rating

240V 11.0

208V 8.3

†Receptacle Locations: For 30" Free-Standing Ranges locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.

Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching of walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

For answers to your Monogram,® GE Profile™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center® service, 800.626.2000.

*Dimension from wall to front of closed oven door handle is 27-3/8”.

Specification Created 12/01

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation

of the range.

Listed by Underwriters

R Laboratories