TM
JB905SH/TH/KH/BH – GE Profile
30" Free-Standing CleanDesign Electric Range
Specification Revised 9/04
221098
Dimensions (in inches)
30
25
2-1/2
7-1/2
29-7/8
25-3/8
47-5/8
46-7/8
2-1/2
Acceptable electrical
outlet area
Preferred electrical
outlet area
Roughed-in dimension
s
Electrical outlet locat ABC.eps
†
Note:
Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical Code requires that new construction (not existing)
utilize a 4-conductor connection to an electric range.
Receptacle Locations
Locally approved flexible service cord or conduit must be used because terminals are not accessible
after range installation. See shaded area in drawing for location of electrical outlet box. Recommended
outlet locations allow range to be installed directly against wall.
Note:
30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops.
To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to
allow for possible extended, high-heat, no-load heating element operation.
Installation Information:
Before installing, consult installation instructions packed with product for
current dimensional data.
*Dimension from wall to front of closed door handle is 27-3/8
.
46-1/2
KW Rating
240V
R
GE Profile
or
appliance questions, visit our website at
service,
TM
30" Free-Standing CleanDesign Electric Range
System – Delivers even heat distribution and maximum oven control.
Loading...