TM
JB905SH/TH/KH/BH – GE Profile 30" Free-Standing CleanDesign Electric Range
Dimensions (in inches)
2-1/2 |
30 |
|
|
|
25 |
Acceptable electrical |
2-1/2 |
outlet area |
|
7-1/2
46-1/2
Preferred electrical outlet area Roughed-in dimensions
*Dimension from wall to front of closed door handle is 27-3/8
Specification Revised 9/04
KW Rating
240V 11.6
208V 
9 8
Breaker Size
40 Amps†
†Note: Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor connection to an electric range.
Receptacle Locations
Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.
Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops. To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to allow for possible extended, high-heat, no-load heating element operation.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
All GE ranges are equipped with |
|
|
an Anti-Tip device. The installation |
Listed by |
|
of this device is an important, |
||
Underwriters |
||
required step in the installation |
||
Laboratories |
||
of the range. |
||
|
||
For answers to your Monogram ® GE Profile or |
|
|
GE® appliance questions, visit our website at |
|
|
.com or call GE Answer Center® service, |
|
|
800.626.2000 |
|
221098
Loading...