GE J2S968BH, J2S968KH, J2S968SH, J2S968TH Specification

0 (0)
GE J2S968BH, J2S968KH, J2S968SH, J2S968TH Specification

TM

J2S968BH/KH/SH/TH – GE Profile30" Slide-In Dual-Fuel Range

Dimensions (in inches) and Installation Information

Accessory

 

 

Backguard

30 Min.

 

Shave Raised Edge To Clear

 

 

 

 

31-1/8 Wide Control Panel

 

 

 

4 Min.

 

 

24

30

4

From Walls

 

9/16

2-7/8"

31-1/4

 

 

 

 

 

2"

 

 

 

To Front

 

 

 

 

Surface Of

 

(Grates)

30 Min.

 

Countertop

 

 

 

 

 

 

 

 

23-3/16

 

13 Max.

 

 

 

 

 

 

 

 

 

 

18 Min.

20-5/8"

 

36

 

 

 

 

 

 

 

 

Door Clearance

 

 

Max. depth of

 

 

From Front

 

 

cord, plug,

 

25

Surface of

 

 

receptacle box

 

 

Countertop

 

 

& gas hookup

 

Acceptable

 

 

36

3-1/2 to prevent

 

Gas Line &

 

 

interference

 

Electrical

 

 

 

with drawer

 

Outlet Area

 

 

 

3

 

7

 

27-1/2

 

 

 

 

 

15

12

 

 

 

 

 

 

 

 

 

 

 

44-3/4

 

29-15/16 Min.

 

 

 

 

 

30-1/16 Max.

 

 

You must use the rear filler strip kit shipped with the range or the optional accessory backguard (JXS31, JXS32, JXS33, JXS34) when installing these ranges.

Note: Cabinets installed adjacent to slide-in ranges must have an adhesion spec of at least 194°F temperature rating.

Optional Kits for Slide-In Gas Ranges:

(Available at additional cost)

Lower/Side Trim Kits

JXS52BB—Lower Trim Kit (Black) JXS53WW—Lower Trim Kit (White) JXS55CC—Lower Trim Kit (Bisque)

Endcap Kit

JXS40—Endcap kit to accommodate replacement where countertop may already be notched.

Accessory Backguards

JXS31—White Accessory Backguard

JXS32—Brushed-Chrome Accessory

Backguard

JXS34—Black Accessory Backguard

JXS35—Bisque Accessory Backguard

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

Counter Cutout Dimensions (in inches)

If you are NOT using the

 

 

If you are using the

optional Filler or Backguard:

 

 

optional Filler or Backguard:

 

 

 

 

 

 

 

 

 

25

 

 

 

 

23-3/16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30

 

 

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specification Revised 11/03

All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.

 

 

For answers to your Monogram,® GE Profileor

 

Listed by

GE appliance questions, visit our website at

 

Underwriters

GEAppliances.com or call

R

Laboratories

GE Answer Center® service, 800.626.2000.

 

 

221203

Loading...
+ 1 hidden pages