GE IC755ACC07ADP Installation Manual

GE

Intelligent Platforms

Operator Interface Products

QuickPanel+ 7” Display Adapter Kit
IC755ACC07ADP

Installation Guide, GFK-2895A
October 2014

1. Overview

Attention: The UL Markings, ATEX Marking, and

all environmental ratings (NEMA4,
UL50 Type 4X, and IP65) have not
been validated for the QuickPanel
Display when used with the adapter.
Therefore, the agency compliances
and standards do not apply to a
QuickPanel

+

7” Display with an

installed Adapter Kit.

Note: The use of a correctly installed adapter does

not affect the QuickPanel

+

product’s

compliance with CE Marking.

+

The QuickPanel
mounting the QuickPanel

7” Display adapter kit facilitates

+

7” Display into a panel with

a cutout previously sized for a QuickPanel 8” Display.
The QuickPanel+ 7” Display should first be inserted

into the adapter and secured using the clamps
provided with the display. The assembly is then
inserted into the 8” cutout in the customer panel.

Note: For user manuals, product updates, and

other information, go to the Support website
at http://www.ge-ip.com/support

and refer to

Operator Interfaces and PC.

+

7”

2 IC755ACC07ADP Installation Guide GFK-2895A

1.1 Functional Compatibility

The adapter kit can be used with the following
QuickPanel

IC755CxW07CDx QuickPanel+7” Display

+

7” Display units:

Part Number Description

1.2 Adapter Kit Contents

Component Qty

Plastic adapter assembly
(with attached gasket)

Mounting clamps 4
Slotted screws 8

1

GFK-2895A IC755ACC07ADP Installation Guide 3

1.3 Adapter Kit Features

Mounting bracket (Qty 4)

Slotted screw (Qty 8)

Customer panel

Adapter

QuickPanel+ Display

The following figure displays the QuickPanel+7”
Display and adapter kit assembly properly installed
into a customer panel.

Assembly Installed in Customer Panel (Side View)

4 IC755ACC07ADP Installation Guide GFK-2895A

1.4 Panel Cutout Dimensions

Adapter

227.84 mm (8.97 in)

186.44 mm (7.34 in)

The QuickPanel
panel cutout dimensions displayed in the following
figure.

Adapter Kit in Customer Panel (Rear View)

+

7” Display adapter kit requires the

GFK-2895A IC755ACC07ADP Installation Guide 5