GE HID Specification Sheet
GE
INDOOR LIGHTING
g
Lighting Solutions
GUIDE FORM SPECIFICATIONS
GARAGE GUARDIAN™ LUMINAIRE HID
Low Bay Enclosed
GENERAL DESCRIPTION
The complete luminaire designated _____ (identify) shall be
a GE GARAGE GUARDIAN™ luminaire with, ordering number
_____ (specify GBP or GBC, plus ordering number logic from
catalog) or approved equal, to operate one _____ (specify [100
or 150(55v)] watt high pressure sodium [HPS], [175 ] watt metal
halide or [100, 150 or 175] watt pulse start metal halide) lamp
from a nominal _____(specify 120, 208, 240, 277, 347 or 480)
volt 60 Hz or (110, 220, 230 or 240) volt 50 Hz power source.
The luminaire shall include a completely prewired integral ballast and optical assembly. The luminaire shall be suitable for
continuous service indoors in a maximum ambient temperature
°
C. The luminaire shall be UL Listed SUITABLE FOR DAMP
of 40
LOCATIONS or UL LISTED FOR WET LOCATIONS depending on
mounting, UL Listed for metal halide lamps in polymeric lamp
containment barriers and C-UL ,(Canadian) Listed for Indoor
Locations.
MECHANICAL CONSTRUCTION
The luminaire shall be shipped as a completely assembled fixture including medium base lamp installed in socket for quick
installation. (Mogul base lamps included but not installed).
A heavy duty medium base socket , with superior lamp gripping shall be mounted to the ballast housing. The socket shall
have the ability to handle the higher pulse ratings of newer
HID systems.
The ballast housing and optical assembly shall be provided
with easy-to-read moisture-resistant nameplates which can be
seen without disturbing the installed luminaire.
The luminaire shall include provision for optional field mounting
of safety chain.
The ballast housing shall be made of die-cast aluminum. The
ballast housing shall have a polyester powder paint finish .
The luminaire shall include a _____ (specify mounting code)
mounting from the following optional mounting configurations:
10 = Surface Mtg. (Junction-box not included)
11 = 3/4" Rigid Pendant
12 = 3/4" Pendant With Bird Shield*
13 = 3/4"Flex Pendant Adjustable
01 = Primary Electrical Disconnect With MPM-C
02 = Primary Electrical Disconnect With MPM-3PR
03 = Primary Electrical Disconnect With MPM-3PF
04 = Primary Electrical Disconnect With MPM-3PRFW
05 = Primary Electrical Disconnect With MPM-3PRTFW
06 = Primary Electrical Disconnect With MPM-WW
BALLAST OPERATION
The luminaire shall contain a standard _____ (specify Autoreg
type ballast*) in full compliance with lamp-ballast specifications available to the fixture manufacturer from the lamp manufacturers at the time of fixture manufacture.
The ballast shall reliably start and operate the lamp in ambient
temperatures down to -20
°
F for metal halide or -40°F for HPS.
OPTICAL ASSEMBLY
The optical assembly shall be enclosed and gasketed to prevent entrance of particulate contaminants. The refractor shall
be UV stabilized injection molded prismatic heat-resistant
acrylic or optional impact resistant polycarbonate optic and
lens.
The optical shall have downlight cutoff classification with uplight window and either clear or painted lower refractor band;
and have optional field adjustable internal uplight shielding.
* REFER TO PRODUCT PAGE IN GELS PRODUCT CATALOG FOR
OTHER BALLAST SELECTIONS. FOR MORE DEFINITIVE ELECTRICAL INFORMATION, REFER TO BALLAST SPECIFICATIONS IN
TECHNICAL DATA SECTION.
NOTE:
Bird Shield Adds 4.4" To Overall Height
* See GELS Product Selection Guide for MPM mounting details.
Guide Form Specifications – 2011
g
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 6 9 4 3 5 3 3- - -- 8 8 8
GE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and logo are trademarks of the General Electric Company.
© 2011 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
Loading...