GE GTWN5450DWW Specification

GTWN5450D GE® 3.9 DOE cu. ft. stainless steel capacity washer

Dimensions and Installation Information (in inches)

Circuit Requirements: An individual, properly-grounded branch

circuit, with a three-prong grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating: 120V, 60Hz, 10A

Note: Washer wall outlet must be located within 36” of service

code entry. Wall outlet must not be located behind dryer.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

25-1/2

Side View

Rear View

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.

Specification Revised 2/12

Listed by Underwriters Laboratories

360109

GTWN5450D GE® 3.9 DOE cu. ft. stainless steel capacity washer

Features and Benefits

• ENERGY STAR® qualified - Meets or exceeds federal guidelines for energy

efficiency for year-round energy and money savings

• HydroWave® Quiet Agitator wash system—longer, slower travel provides gentle,

thorough cleaning

• LED electronic controls with cycle countdown display show exactly how much

time is left for each cycle

• eWash option—energy saving option uses a cold-water wash on select cycles

without sacrificing performance

• eMonitor—an electronic readout shows the exact efficiency of each cycle so

the user can decide how they want to wash each load

• 20 wash cycles handle various fabrics and soils

• PreciseFill with the option of 4 water level selections will automatically measure

the load size and add just the right amount of water

• Bleach and fabric softener dispensers automatically operate with wash cycle

• 700-RPM spin speed—fast spin speeds remove water efficiently and minimize

dry times

• Model GTWN5450DWW – White

Modified Energy Factor (MEF)

Water Factor (WF)

Specification Revised 2/12

2.07

6.0

360109