GE GTWN5250DWW Specification

GTWN5250D GE® 3.9 DOE cu. ft. stainless steel capacity washer

Dimensions and Installation Information (in inches)

Circuit Requirements: An individual, properly-grounded branch

circuit, with a three-prong grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating: 120V, 60Hz, 10A

Note: Washer wall outlet must be located within 36" of service

code entry. Wall outlet must not be located behind dryer.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

25-1/2

Side View

Rear View

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.

Specification Revised 8/12

Listed by Underwriters Laboratories

360110

GTWN5250D GE® 3.9 DOE cu. ft. stainless steel capacity washer

Features and Benefits

• ENERGY STAR® qualified —meets or exceeds federal guidelines for energy

efficiency for year-round energy and money savings

• HydroWave® Quiet Agitator wash system—longer, slower travel provides gentle,

thorough cleaning

• Rotary electronic controls with cycle status lights provide accurate cycle times

• 10 wash cycles handle various fabrics and soils

• PreciseFill with the option of 4 water level selections will automatically measure

the load size and add just the right amount of water

• Bleach and fabric softener dispensers automatically operate with wash cycle

• 700-RPM spin speed—fast spin speeds remove water efficiently and minimize

dry times

• Model GTWN5250DWW – White

Modified Energy Factor (MEF)

Water Factor (WF)

Specification Revised 8/12

2.0

6.0

360110