GE GTWN5050MWS Quick Reference Guide

GE High-Efficiency Washer Quick Reference
Topics
Comments
Reasons
Water level seems low, Not enough water
This is normal
During the wash cycle water may not entirely cover the top of clothes. Infusor™ wash technology is at work and will provide excellent cleaning.
Detergent
Use High Efficiency detergent
The use of HE detergent will optimize wash performance and prevent over sudsing.
Fabric Softener
Always use dispenser located on the top of the Infusor™ when using Fabric Softener.
Using the dispenser will ensure optimal distribution of fabric softener and avoid spotting on garments.
“EcoFill” Load Size Option
Washer will not fill with water when lid is open
Unit will not operate with lid open during "EcoFill". This is for your safety - basket spins to aid in load sensing – also allows option to perform properly.
Seems too quiet
This is normal
HydroWave system is very quiet during portions of the wash cycle. This action allows for optimal wash performance.
Pauses
This is normal
At the beginning of the Cycle (with lid open or closed) the smart drive system is sensing the load; as a result, there will not be any noise.
“Swoosh” or “zip” sound
This is normal
The machine uses a (no gear) direct drive system. This is the sound of the motor rotating back and forth to agitate your laundry.
175D6444P001
Small Load
Large Load
Super Load
4. Turn OPTIONS Knob on control panel to FABRIC SOFTENER setting
3. Close Infusor Lid
2. Measure Fabric
Softener and Pour
1. Lift Infusor Lid
Guide
Congratulations on the purchase of your new GE high-efficiency washer!
This HE washer has the new HydroWave™ system with Infusor™ wash technology. This system provides
excellent performance while using less water and energy than a conventional washer. You will notice some differences during operation. Below is a list of quick tips to better understand your unit during normal operation.
Loading...