GE GTW485, GTW460, GTW410, GTW220, HTW220 Owner's Manual & Installation Instructions
...
GEAppliances.com
Safety Instructions ..........2, 3
Operating Instructions
Care and Cleaning
of the Washer .................... 13
Features ..........................12
Loading and Using
the Washer ...................... 11
Operating instructions .........4–10
Installation Instructions . 14–18
Troubleshooting Tips .....19–24
Consumer Support
Consumer Help Indicator .........10
Consumer Support ................26
Parts and Accessories. . . . . . . . . . .3, 26
Warranty ..........................25
Owner’s Manual &
Installation Instructions
GTW485*
GTW460
GTW410
GTW220
HTW220
HTW200
English/Français/Español
As an ENERGY STAR® partner,
*
GE has determined that this
product meets the ENERGY STAR®
guidelines for energy efficiency.
Write the model and serial
numbers here:
Model # _____________
Washers
Printed in the United States
Serial # ______________
You can find
them under
the lid of the
washer.
G002
49-90549-1 06-15 GE
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill you or hurt you and others. All safety
messages will follow the safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”. These words are defined as:
DANGER
WARNING
CAUTION
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Read all instructions before using the appliance.
DO NOT wash or dry articles that have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry-
cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
DO NOT add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These
substances give off vapors that could ignite or explode.
Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for 2 weeks
or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a
washing machine, turn on all hot-water faucets and let the water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable, DO NOT smoke or use an open flame during this time.
DO NOT allow children to play on or in this appliance. Close supervision of children is necessary when this appliance is
used near children. Before the washer is removed from service or discarded, remove the door or lid. Failure to follow
these instructions may result in death or injury to persons.
To reduce the risk of death, fire, explosion, electric shock, or injury to persons when using your appliance,
follow basic precautions, including the following:
DO NOT reach into the appliance if the tub or agitator is moving to prevent accidental entanglement.
DO NOT install or store this appliance where it will be exposed to the weather.
DO NOT tamper with controls, repair or replace any part of this appliance or attempt any servicing unless specifically
recommended in the user maintenance instructions or in published user repair instructions that you understand and
have the skills to carry out.
DO NOT operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts
including a damaged cord or plug.
Unplug the appliance or turn off the circuit breaker before servicing. Pressing the Power button DOES NOT disconnect power.
See “Electrical Requirements” located in the Installation Instructions for grounding instructions.
SAVE THESE INSTRUCTIONS
2
GEAppliances.com
PROPER INSTALLATION
This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
Ensure that the hot water hose is connected to the “H”
valve and the cold water hose is connected to the “C”
valve.
Install or store where it will not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate the
warranty.
Properly ground washer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
WARNING
Plug into a grounded 3 prong outlet.
DO NOT remove ground prong.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow these instructions can result in death
or electrical shock.
Ensure washer is properly leveled and washer legs are
adjusted such that unit is stable.
- Electrical Shock Hazard
Optional drain hose extension recommended for
discharging heights from 60” - 96”.
This washer does not include water supply hoses.
GE strongly recommends the use of factory specified
parts. A list of factory hoses available for purchase are
listed. These hoses are manufactured and tested to meet
GE specifications.
GE strongly recommends the use of new water supply
hoses. Hoses degrade over time and need to be replaced
every 5 years to reduce the risk of hose failures and water
damage.
Parts and Accessories
Order on-line at GEApplianceparts.com today, 24 hours a
day or by phone at 800.626.2002 during normal business
hours. In Canada, visit your local GE parts distributor or call
800.661.1616.
Part Number Accessory
PM14X10002 4 ft rubber water supply hoses
Or
PM14X10005 4 ft braided water supply hoses
WH49X301 Drain hose extension
START-UP SEQUENCE
¥
Any time the washer is being started or restarts after the
washer lid has been opened and closed, the washer will
turn on the cold water valve for two short periods followed
by a 10 second pause before continuing.
WHEN NOT IN USE
Turn off water faucets to minimize leakage if a break or
rupture should occur. Check the condition of the fill hoses;
GE recommends changing the hoses every 5 years.
PM7X1 Washer Floor Tray
If the lid is opened during this period, the washer will
pause. You will have to push the Start button again to
restart the cycle.
SAVE THESE INSTRUCTIONS
3
Operating instructions.
Throughout this manual, features and appearance may vary from your model.
Step 1
fabric softener dispenser
(on some models); see page 12.
• Add the manufacturer’s
recommended amount of
detergent.
the use of High Efficiency
detergents such as in your
energy efficient washer.
detergent pods in the bottom
of the wash basket before
adding clothes.
GE recommends
Place
Step 2
• Loosely add items around
agitator. Overloading may
negatively impact wash
performance. See page 11
for suggested loading
examples.
• Close lid.
NOTE: Washer will not start
with lid open.
Step 3
• Select wash cycle.
• Select wash options,
including Deep Rinse
option (on some
models) when using
fabric softener.
• Select options.
Step 4
• Press Start.• Add fabric softener to the
Controls
B AEE F FF
D
B AEC F FF
4
D
D
GEAppliances.com
B AEC FF
B AC EF
D
D
B AC FF
B AC
D
5
Operating instructions.
Start/Pause
A
Press Start to begin the cycle. NOTE: The lid must be closed for the washer to start the cycle. If the lid is closed, the lid will lock and the Lid
Locked light will illuminate.
Pressing Pause will unlock the lid (if locked at that time), pause the cycle and the Pause indicator light will blink.
To continue the cycle, press Start again. If machine is paused more than 24 hours, the cycle will be cancelled. If water remains in the
machine, select the Drain & Spin cycle to drain basket and spin water out of the washer basket.
Cycle Status Lights
B
Shows whether the washer is in the Fill, Soak, Wash, Rinse or Spin portion of the cycle.
Load Size (on some models)
C
Add detergent to the bottom of the basket and fabric softener to the dispenser (on some models) prior to loading clothes.
Loosely load items in the washer basket. Overloading may negatively impact wash performance. Adjust the load size accordingly.
Make the load selection:
Precise Fill (on some models)
– For convenience, best performance and optimal efficiency, select Precise Fill for models so equipped. This selection automatically provides the
correct amount of water suited to the size and type of load placed in the unit. Lid will be locked for the duration of the load sensing process,
which includes a series of short spins and a portion of the water fill.
– If you prefer to manually select the water level, select Small through Super. While Precise Fill is best for most loads and general washing, you
may want to manually select the load size for specialty items such as bulky, lightweight comforters or pillows, where you want to ensure a larger
water level is applied. Manual load size selections should be made for wet items placed in the washer, such as soaked towels or garments.
– The washer will not fill with water when
begin filling with water in order to sense the load size.
NOTE: This is a high-efficiency washing machine. This system requires less water while providing effective cleaning action. You may notice that the
water level is lower than on your previous washer. This is normal.
Precise Fill
is selected if the lid is opened. When the lid is closed the machine is able to
6
Wash Cycles-Cycle Selector Knob
D
The wash cycle controls the type of washing process. The cycle selector knob can be turned in either direction. Turning the knob after
starting a cycle will stop the washer and change the cycle/options to the new selection. Press Start to begin the new cycle selection.
The chart below will help you match the items to be washed with the best wash cycle settings. For optimal performance, select the
cycle that most closely matches the items being washed.
Selections and options shown in bold are default settings for that cycle.
Some cycles and options may not be available on some models.
Items to Wash Cycle Wash Temp Soil Level Spin Selection Options Available Cycle Details
Heavily to
lightly soiled
colorfast cottons,
household linens,
work and play
clothes.
Dark colored
cottons, linens,
and mixed loads.
Casual clothes,
lightly soiled
office wear.
Lingerie and
special care
fabrics with light
to normal soil.
Medium to lightly
soiled athletic
wear items.
Medium to dark
colored cottons,
linens, and mixed
loads.
Colors Hot
Dark
Colors
Casuals Hot
Delicates Hot
Active
Wear
Cold
Wash
Warm
Colors
Cool
Cold
Tap Cold
Hot
Warm
Colors
Cool
Cold
Tap Cold
Warm
Colors
Cool
Cold
Tap Cold
Warm
Colors
Cool
Cold
Tap Cold
Hot
Warm
Colors
Cool
Cold
Tap Cold
Hot
Warm
Colors
Cool
Cold
Tap Cold
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Max/Extra
Normal
Max/Extra
Normal
Max/Extra
Normal
Max/Extra
Normal
Max/Extra
Normal
Max/Extra
Normal
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
This is the normal cycle which is
recommended for normally soiled
cotton and linen items. Choose
the Heavy or Extra Heavy soil
level selection and Warm or Hot
water temperature selection as
appropriate for your clothes load
for a higher degree of cleaning.
Incorporates multi-stage fills and
wash periods to provide optimal
fabric care. For models on which
there is no temperature selection on
the control panel, this cycle provides
a Warm wash temperature only.
Lower wash temperatures, a shorter
wash period, and a deep fill rinse
(on some models) minimizes fading
and spotting of dark colored cotton
fabrics. Incorporates multi-stage
fills and wash periods to provide
optimal fabric care. For models
on which there is no temperature
selection on the control panel
this cycle provides a Cold wash
temperature only.
Wash period tailored to care for
casual clothes and office wear items.
Incorporates multi-stage fills and
wash periods to provide optimal fabric
care.
Utilizes a unique “tri-pulse” extra
gentle agitate profile to provide
special care to delicate fabrics. It is
recommended to place small or ultra
delicate items in mesh bags before
washing. For models on which there
is no temperature selection on the
control panel, this cycle provides a
Cool wash temperature only.
Cycle designed for care of medium
to lightly soiled active wear, aththletic
wear, and technical fabrics.
Incorporates a multi stage wash
period with soak to effectively treat
body soils and odors. Use the Heavy
Duty cycle for heavily soiled sports
clothing constructed of sturdy fabric.
Cycle combines multiple extended
wash agitation periods with soak
periods to provide enhanced cleaning
performance and energy efficiency
with colder water temperatures.
GEAppliances.com
7
Operating instructions.
Wash Cycles-Cycle Selector Knob - Continued
D
Items to Wash Cycle Wash Temp Soil Level Spin Selection Options Available Cycle Details
Small loads of
lightly soiled items
that are needed in
a hurry.
Wet load of items.
For items that need
only to be rinsed,
use this cycle with
Deep Rinse option.
Jeans with
medium to light
soil. For heavily
soiled work jeans,
use the Heavy
Duty Cycle.
Sturdy fabrics with
heavy to medium
soil.
Large coats, bed
spreads, mattress
covers, sleeping
bags, and similar
large bulky items.
Towels.
Sheets.
Heavy to medium
soiled whites,
household linens,
work and play
clothes.
Speed
Wash
Drain &
Spin
Jeans Hot
Heavy
Duty
Bulky
Items
Towels /
Sheets
Whites Hot
Hot
Warm
Colors
Cool
Cold
Tap Cold
Warm
Colors
Cool
Cold
Tap Cold
Hot
Warm
Colors
Cool
Cold
Tap Cold
Hot
Warm
Colors
Cool
Cold
Tap Cold
Hot
Warm
Colors
Cool
Cold
Tap Cold
Warm
Colors
Cool
Cold
Tap Cold
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Ex. Heavy
Heavy
Normal
Light
Ex. Light
Max/Extra
Normal
Max/Extra
Normal
Max / Extra
Normal
Max / Extra
Normal
Max / Extra
Normal
Max / Extra
Normal
Max / Extra
Normal
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Stain PreTreat Guide
Deep Fill
Auto Soak
Deep Rinse
2nd Rinse
Utilizes an expedited wash period and
time saving continuous spray rinse to
clean small lightly soiled loads in the
fastest time possible.
Utilizes a high speed spin to extract
water from wet items. For items that
need to be rinsed, select the Deep
Rinse and/or 2nd Rinse option when
using this cycle.
Combines higher water levels, a
specially designed agitation profile,
and multi step wash and soak periods
to care for jeans with medium to
light soil. Use the Heavy Duty cycle
for heavily soiled work jeans.
Incorporates multi-step wash and
soak periods combined with extended
wash periods to effectively clean
heavily to medium soiled sturdy
fabrics.
Provides a Deep Fill/max fill wash
water level to wash bulky items.
Also incorporates a Deep Fill rinse to
effectively rinse bulky items.
Cycle designed washing towels or
sheets, using a higher water level
and a soak period to effectively
clean these items. It is recommended
that towels and sheets be washed
separately for best care and
washing performance.
Combines the hottest water
temperature available (based on
water heater setting) with longer wash
periods to clean and brighten whites. It
is recommended that a Oxi or chlorine
bleach product appropriate for items
being washed be used with this cycle
to maximize whitening performance.
For models on which there is no
temperature selection on the control
panel, this cycle provides a Hot wash
temperature only.
8
Loading...