Top Freezer Moisture Forming Around Fresh Food Air Vent
stallatio
I
I
structio
S
Foam Control Housing
KIT:WR01XI0996
MODELS: GT*I6*,GT*I7*,GT*I8*,HI*f6*,
HI*IT*,HT*I8*,MT*I6*,MT*I7*& MT*IS*
Serial: 7xxxxx to 8XXXXX
Parts Provided:
Installation Instructions
Foam pieces with adhesive backing(2)
Tools Requried:
# 2 Phillips head to remove control housing
PPE Requried:
Safety Glasses
Safety Gloves
Foam should be 1/4"_+ 1/8"
from the opening
on this side
Foam on the other side is
directly opposite.
Install foam flush with the surface
orjust below. Ensure foam does not
protrude above the surface.
WARNING
Disconnect power to the appliance before beginning installation.
Do not operate the refrigerator until the installation is complete,
GEAppliances
General Electric Company
Louisville, Kentucky 40225
197D9876P00131-45450 09-11 GE