GSS23HSH/HMH
GE Appliances 22.5 Cu. Ft. Side-By-Side Refrigerator
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
Height to top of hinge (in.) A
Height to top of case (in.) B
Case depth without door (in.) C
Case depth less door handle (in.) D
Case depth with door handle (in.) E
OVERALL
DIMENSIONS
Depth with fresh food door open 90˚ (in.) F
Width (in.) G
Width with door open 90˚ with door handle (in.) H
Each side (in.)
Top (in.)
AIR
Back (in.)
CLEARANCES
If installed against a wall, allow clearance of 14-3/16" on
freezer side to remove bin.
Clearance required to remove fresh food full-size pan without
disassembling is 18-15/16".
Allow additional space for any necessary leveling
adjustments.
69-1/2
69
28-1/2
32-3/4
35-1/4
50-1/2
32-3/4
37-3/4
1/8
1
2
A
B
C
D
H
G
E
F
For answers to your Monogram, GE Café™ Series,
GE Profile™ Series or GE Appliances product questions,
visit our website at geappliances.com or call GE Answer
Center® Service, 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 12/15
GSS23HSH/HMH
GE Appliances 22.5 Cu. Ft. Side-By-Side Refrigerator
FEATURES AND BENEFITS
32-3/4" wide
Integrated shelf support system – Provides strong, flexible support
Adjustable slide-out, spillproof glass shelves – Raised edges help contain spills and make
cleanup quick and easy
Fresh food multi-level drawers – Provide the ideal environment for storing your fruits
and vegetables
Adjustable gallon door bins – Offer ideal space for storing gallon containers in the door
Arctica icemaker – A special access door puts ice within reach
Advanced filtration – Removes trace pharmaceuticals from water and ice* and uses
replacement filter MWF
(*Removes ibuprofen, atenolol, fluoxetine, progesterone and trimethoprim. These
pharmaceuticals are not necessarily in all users’ water.)
Model GSS23HSHSS – Stainless steel
Model GSS23HMHES – Slate
DOOR ALARM
WATER FILTER
WATER CRUSHED CUBED LIGHT LOCK
Hold 3 seconds to Reset
Adjust Temperature
FREEZER
REFRIGERATOR
SET TEMP
ACTUAL TEMP
37° F Recommended0° F Recommended
UFAS
COMPLIANT
Specification Revised 12/15