GSS20IEMWH
GSS20IEM - GE 19.9 Cu. Ft. Side-By-Side Refrigerator
GE Appliances
Specification Revised 3/01
Dimensions (in inches)
A
Top View
G
D
C
F
B
E
H
Height with hinge (in.) A 67-1/2
Height without hinge (in.) B 66-1/2
Depth without Doors (in.) C28
Depth with Doors (in.) D 30-3/4
Depth plus Handle with Doors Closed (in.) E33
Depth with Doors open 90° (in.) F 46-9/16
Width with Doors Closed (in.) G 31-1/2
Width with Doors open 90° Less Door Handle(in.) H 31-1/2
Each side (in.) 1/8
Top (in.) 1
Back (in.) 1
Overall
Dimensions
Air
Clearances
Note: If the doors cannot be fully opened because of an obstruction or a
wall on either side, a door stop should be provided to prevent door or wall
damage. If the doors cannot be opened at least 90 degrees, access to the
drawers is limited.
Manufacturer Certified to
ASSOCIATION OF HOME
APPLIANCE MANUFACTURERS
ANSI/AHAN HRF-1-1979
VOLUME and
SHELF AREA
R
Total volume and shelf
area are calculated by the
Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
For answers to your Monogram,®GE Profile™or
GE appliance questions, visit our website at
WWW.GEAppliances.com or call
GE Answer Center®service, 800.626.2000.
Note: Add 9/16” for water hook-up. Hook-up fits in 5/8” back air clearance
when calculating installation depth.
If installed against a wall, allow clearance of 10-2/3” on freezer side to
remove bin.
To remove fresh food pans, remove door bins.
Clearance required to remove fresh food full-size pan without
disassembling: 13-1/2” (20 cu. ft.)
Plus, allow additional space for any necessary leveling adjustments.
Loading...