GE GSD5122, EDW2050, GSD5130, GSD5120, GSD5112 User Manual

...
GE Appliances
GE Answer Center®800.626.2000
Dishwashers
Part No. 165D4700P201 Pub. No. 49-5875
12-99 JR
EDW2020 EDW2030 EDW2050 EDW2060 GSD5110 GSD5112 GSD5120 GSD5122 GSD5130 GSD5132 GSD5114 GSD5124 GSD5134 GSD5310 GSD5320 GSD5330 GSD5350 GSD5360
Owner’s Manual
www.geappliances.com
Congratulations! You Are Now Part of the GE Family.
Welcome to the GE family. We’re proud of our quality products and we are committed to providing dependable service. You’ll see it in this easy-to-use Owner’s Manual and you’ll hear it in the friendly voices of our customer service department.
Best of all, you’ll experience these values each time you use your dishwasher. That’s important, because your new dishwasher will be part of your family for many years. And we hope you will be part of ours for a long time to come.
We thank you for buying GE. We appreciate your purchase, and hope you will continue to rely on us whenever you need quality appliances for your home.
2
Important!
Fill out and return the Consumer Product Registration Card. There are two easy ways to register your appliance.
Through the Internet at
www.geappliances.com.
Complete and mail the enclosed card.
Write the model and serial numbers here.
#
#
You can find them on the tub wall just inside the door.
Staple sales slip or cancelled check here.
Proof of the original purchase date is needed to obtain service under the warranty.
Review the Section on Troubleshooting Tips
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
GE & You, A Service Partnership.
Inside you will find many helpful hints on how to use and maintain your dishwasher properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your dishwasher.
Read this Manual
Ask any GE appliance owner and they will tell you we stand behind our products with unmatched quality service. However, did you know that most questions result from simple problems that you can easily fix yourself in just a few minutes? This Owner’s Manual can tell you how.
You’ll find many answers to common problems here. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
If you do need service, you can relax knowing help is only a phone call away. A list of toll-free customer service numbers is included in the back section. Or you can always call the GE Answer Center
® at
800.626.2000, 24 hours a day, 7 days a week.
If You Need Service
Safety Information . . . . . .4–7

Operating Instructions

Control Panel and
Settings . . . . . . . . . . . . . . .8–11
Using the Dishwasher . . .12–13
Loading the Racks . . . . . .14–16
Optional Accessories . . . . . . .17
Care and Cleaning . . . . . . . . .18

Troubleshooting Tips

Before You
Call For Service . . . . . . . . 19–23

Customer Service

Product Registration . . . . .29–30
Warranty . . . . . . . . . . . . . . . .31
Service Telephone
Numbers . . . . . . . . . .Back Cover
3

Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.
4
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allow them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.
WATER HEATER SAFETY
5
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Use this appliance only for its intended purpose as described in this Owner’s Manual.
This dishwasher must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet with your dishwasher, you can receive one by calling us toll-free at the GE Answer Center
®
, 800.626.2000.
Connect to a grounded
metal, permanent wiring system; or run an equipment­grounding conductor with the circuit conductors and connect to the equipment­grounding terminal or lead of the appliance.
Improper connection of
the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.
Dispose of discarded
appliances and shipping or packing material properly.
Do not attempt to repair
or replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
To minimize the possibility of
electric shock, disconnect this appliance from the power supply before attempting any maintenance.
NOTE:
Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.
PROPER INSTALLATION AND MAINTENANCE
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.
6
DO NOT…
Do not tamper with controls.
Do not abuse, sit on, or stand
on the door or dish rack of the dishwasher.
Do not discard a dishwasher
without first removing the door of the washing compartment.
Do not store or use
combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Do not allow children to
play inside, on or with this appliance or any discarded appliance.
WARNING!
7
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
WHEN USING YOUR DISHWASHER
Use only powder, tabs,
liquid detergents or rinse agents recommended for use in a dishwasher and keep them out of the reach of children. Cascade® Automatic Dishwashing Detergent has been approved for use in all GE dishwashers.
Locate sharp items so that
they are not likely to damage the door seal.
Load sharp knives with the
handles up to reduce the risk of cut-type injuries.
Do not wash plastic items
unless marked
dishwasher
safe
or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.
Non-Dishware Items: Do not
wash items such as electronic air cleaner filters, furnace filters and paint brushes in your dishwasher. Damage to dishwasher and discoloration or staining of dishwasher may result.
Do not touch the heating
element during or immediately after use.
Do not operate your
dishwasher unless all enclosure panels are properly in place.
Close supervision is necessary
if this appliance is used by or near children.
Load light, plastic items
so they will not become dislodged and drop to the bottom of the dishwasher— they might come into contact with the heating element and be damaged.
Read and follow this Safety Information carefully.
SAVE THESE INSTRUCTIONS
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About the dishwasher control panel.
You can locate your model number on the tub wall just inside the door.
Throughout this manual, features and appearance may vary from your model.
8
Load Selections
The light above the selected pad will be ON to indicate which LOAD SELECTION has been selected.
POTS & PANS For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday
dishes may be included. This cycle will not remove burned-on foods.
NORMAL
For loads of everyday dishes and glassware with medium soils.
LIGHT WASH For dishes with light soils.
CHINA CRYSTAL
For lightly soiled china and crystal.
RINSE ONLY
For rinsing partial loads that will be washed later. Do not use detergent with this cycle.
CLEAN
OPTIONSLOAD SELECTIONS
START RESET
DELAY
2 4 8
START
LOCK
(2 TIMES)
HEATED
DRY
POTS
& PANS
HI TEMP
WASH
HI TEMP
RINSE
RINSE
ONLY
CHINA
CRYSTAL
LIGHT WASH
NORMAL
1
2
3
4
1
Control Settings
Options
The light above the selected pad will be ON to indicate which OPTION has been selected.
HI TEMP
Turns on the heater in all postrinse and final rinse cycles to help prevent spotting
RINSE
on dishware. This option may be turned
ON
or
OFF
during the wash cycle.
HI TEMP
Energizes the heater to boost water temperature in all prewash and main wash fill
WASH
cycles. Recommended for use with heavily soiled dishes. Option may be turned
ON
or
OFF
during the wash cycle.
HEATED
DRY Shuts off the drying heat option. Dishes air dry naturally and energy is saved. You
OFF
can prop the door open after the
CLEAN
light illuminates.
HEATED DRY
Turns the heater on for fast drying. This cycle will extend the time to your wash
ON
cycle by 30 minutes.
NOTE:
Cannot be selected with
RINSE ONLY
cycle.
LOCK
When the
LOCK
pad is touched twice within 3 seconds, all pads become inoperative.
You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have
started a cycle or selected DELAY START so the cycle or DELAY
START is not interrupted.
Children cannot accidentally start dishwasher by touching pads with this option selected.
To unlock the dishwasher after it has been locked, touch the
LOCK
pad twice within
3 seconds. The light above the
LOCK
pad will turn off.
DELAY START
You can delay the start of a wash cycle for up to 8 hours. Press the
DELAY START
pad to choose the number of hours you want to delay
the start of the cycle. The
machine will count down and start automatically
at the correct time.
Pressing the START/RESET button will cancel the DELAY START selection. NOTE:
If you forget to latch the door a reminder signal will beep until you do so.
RESET
To change a cycle after washing starts, touch the
START/RESET
pad to cancel the cycle. After water is pumped out and the motor stops, you can reprogram and restart the dishwasher. This will take approximately 90 seconds.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Start
Close and latch the door. Touch the
START/RESET
pad to begin the cycle. Water
fill begins and approximately 40 seconds later the wash action begins.
NOTE:
The dishwasher remembers your last cycle so you don’t have to reprogram each time. When the dishwasher is loaded and the door latch is in the locked position, the control panel lights will be
ON
and display the last settings you
selected.
If you don’t want to change any of the settings, simply touch the
START/RESET
pad to begin the cycle.
Also, if a power failure occurs,
NORMAL
and
HEATED DRY
will automatically be
programmed. Make any new selections and touch the
START/RESET
pad to begin
the cycle.
2
3
Clean
This light is illuminated when a wash cycle is complete. The light will stay
ON
until the door is opened.
4
9
Lights What It Means What To Do
This is normal. Allow the dishwasher to drain and The
START/RESET
pad reset before you start a new wash
has been pressed. cycle.
Control Error Press the
START/RESET
pad to turn
off the beeper. If the
CLEAN
light
continues to flash, call for service.
Control Error Press the
START/RESET
pad to turn off the beeper and the dishwasher will attempt to reset. Then restart the wash cycle. If this error continues, call for service.
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Flashing display lights.
10
NORMAL
PLUS A
BEEPING
SOUND
RESET
STARTSTART
CLEANCLEAN
PLUS A
BEEPING
SOUND
Loading...
+ 22 hidden pages