GE GSD4124, GSD4122, GSD4134, GSD4010, GSD4132 User Manual

...
GE Appliances
GE Answer Center®800.626.2000
Dishwashers
Part No. 165D4700P194 Pub. No. 49-5869
6-99 JR
GSD4010 GSD4020 GSD4030 GSD4112 GSD4114 GSD4122 GSD4124 GSD4132 GSD4134
Congratulations! You Are Now Part of the GE Family.
Welcome to the GE family. We’re proud of our quality products and we are committed to providing dependable service. You’ll see it in this easy-to-use Owner’s Manual and you’ll hear it in the friendly voices of our customer service department.
Best of all, you’ll experience these values each time you use your dishwasher. That’s important, because your new dishwasher will be part of your family for many years. And we hope you will be part of ours for a long time to come.
We thank you for buying GE. We appreciate your purchase, and hope you will continue to rely on us whenever you need quality appliances for your home.
2
Important!
Fill out and return the Consumer Product Ownership Registration card that is packed with this product. If you cannot find it, please send in the duplicate card printed in the back of this manual.
Write the model and serial numbers here.
#
#
You can find them on the tub wall just inside the door.
Staple sales slip or cancelled check here.
Proof of the original purchase date is needed to obtain service under the warranty.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
GE & You, A Service Partnership.
Inside you will find many helpful hints on how to use and maintain your dishwasher properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your dishwasher.
Read this Manual
Ask any GE appliance owner and they will tell you we stand behind our products with unmatched quality service. However, did you know that most questions result from simple problems that you can easily fix yourself in just a few minutes? This Owner’s Manual can tell you how.
You’ll find many answers to common problems here. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
Review the Section on Troubleshooting Tips
If you do need service, you can relax knowing help is only a phone call away. A list of toll-free customer service numbers is included in the back section. Or you can always call the GE Answer Center
® at
800.626.2000, 24 hours a day, 7 days a week.
If You Need Service
Safety Information . . . . . .4–7

Operating Instructions

Control Panel and Settings . .8, 9 Using the Dishwasher . . .12–13
Loading the Racks . . . . . .14–16
Optional Accessories . . . . . . .17
Care and Cleaning . . . . . . . . .18

Troubleshooting Tips

Before You
Call For Service . . . . . . . . 19–23

Customer Service

Product Registration . . . . . . . .30
Warranty . . . . . . . . . . . . . . . .31
Service Telephone
Numbers . . . . . . . . . .Back Cover
3

Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service

IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.
4
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water has not been used for two weeks or more, prevent the possibility of damage or injury by turning on all hot water faucets and allow them to run for several minutes. Do this before using any electrical appliance which is connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke or use an open flame or appliance during this process.
WATER HEATER SAFETY
5
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Use this appliance only for its intended purpose as described in this Owner’s Manual.
This dishwasher must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet with your dishwasher, you can receive one by calling us toll-free at the GE Answer Center
®
, 800.626.2000.
Connect to a grounded
metal, permanent wiring system; or run an equipment­grounding conductor with the circuit conductors and connect to the equipment­grounding terminal or lead of the appliance.
Improper connection of the
equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.
Dispose of discarded
appliances and shipping or packing material properly.
Do not attempt to repair or
replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
To minimize the possibility of
electric shock, disconnect this appliance from the power supply before attempting any maintenance.
NOTE:
Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.
PROPER INSTALLATION AND MAINTENANCE
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING.
6
DO NOT…
Do not tamper with controls.
Do not abuse, sit on, or stand
on the door or dish rack of the dishwasher.
Do not discard a dishwasher
without first removing the door of the washing compartment.
Do not store or use
combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Do not allow children to play
inside, on or with this appliance or any discarded appliance.
WARNING!
7
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
WHEN USING YOUR DISHWASHER
Use only powder, tabs or
liquid detergents or wetting agents recommended for use in a dishwasher and keep them out of the reach of children. Cascade® Automatic Dishwashing Detergent has been approved for use in all GE dishwashers.
Locate sharp items so that they
are not likely to damage the door seal.
Load sharp knives with the
handles up to reduce the risk of cut-type injuries.
Do not wash plastic items
unless marked
dishwasher safe
or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.
Non-Dishware Items: Do not
wash items such as electronic air cleaner filters, furnace filters and paint brushes in your dishwasher. Damage to dishwasher and discoloration or staining of dishwasher may result.
Do not touch the heating
element during or immediately after use.
Do not operate your
dishwasher unless all enclosure panels are properly in place.
Close supervision is necessary
if this appliance is used by or near children.
Load light plastic items so they
will not become dislodged and drop to the bottom of the dishwasher—they might come into contact with the heating element and be damaged.
Read and follow this Safety Information carefully.
SAVE THESE INSTRUCTIONS
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
About the dishwasher control panel.
You can locate your model number on the tub wall just inside the door.
Throughout this manual, features and appearance may vary from your model.
8
Cycle Selections
The light above the selected pad will be ON to indicate which CYCLE SELECTION has been selected.
NORMAL
For loads of everyday dishes, glasses and cookware with medium soils.
NOTE:
Many dishes have lighter
soil than
normal. Choosing a cycle other than
NORMAL
will save energy
and water.
POT SCRUBBER For heavily soiled dishes or cookware with dried-on or
baked-on soils. Everyday dishes may be included. This cycle will not remove burned-on foods.
CHINA CRYSTAL For lightly soiled china and crystal.
(on some models)
LIGHT WASH For dishes with light soils.
RINSE & HOLD For rinsing partial loads that will be washed later.
Do not use
detergent with this cycle.
CYCLE SELECTIONS
OPTIONS
NORMAL
START RESET
LIGHT WASH
POT
SCRUBBER
RINSE
& HOLD
HI TEMP
RINSE
HI TEMP
WASH
HEATED
DRY
LOCK
(2 TIMES)
DELAY START
2 4 6
CLEAN
Control Settings
Options
The light above the selected pad will be ON to indicate which OPTION has been selected.
HI TEMP RINSE Turns on the heater in all prerinse and final rinse cycles to help prevent
spotting on dishware. This option may be turned ONor
OFF
during the
wash cycle.
HI TEMP WASH Energizes the heater in all prewash fill cycles. Recommended for use with
heavily soiled dishes. Option may be turned ONor
OFF
during the wash cycle.
HEATED DRY Shuts off the drying heat options. Dishes air dry naturally and energy is
OFF
saved. You can prop the door open after the light goes ONbelow the word
CLEAN.
HEATED DRY Turns the heater on for fast drying. This option will extend the time to your
ON
wash cycle by 30 minutes.
NOTE:
This cannot be selected with
RINSE &
HOLD
cycle.
LOCK
When the
LOCK
pad is touched twice within three seconds, all pads become
inoperative.
You can lock the controls to prevent any selections from being made.
Or you can lock the controls after you have
started a cycle or selected DELAY
START so the cycle or DELAY START is not interrupted.
Children cannot accidentally start dishwasher by touching pads with this option selected.
To unlock the pads after they have been locked, touch the
LOCK
pad twice
within three seconds. The light above the
LOCK
pad will turn off.
DELAY START You can delay the start of a wash cycle for up to six hours (up to eight
hours on some models). Press and hold the
DELAY START
pad to choose the number of hours you want to delay the start of the cycle. The machine will count down and start automatically at the correct time.
NOTE:
If you
forget to latch the door, a reminder signal will beep until you do so.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Start
The light above the START/RESET pad will be ON to indicate that it has been selected.
Touch the
START/RESET
pad to begin the cycle. There is a time delay between
start-up and water fill so you will not hear any wash action right away.
The cycle is complete when the light is ONbelow the word
CLEAN.
NOTE:
The dishwasher remembers your last cycle so you don’t have to reprogram each time. When the dishwasher is loaded and door latch is in the locked position, the control panel lights will be
ON
and will display the last settings you selected. If you don’t want to change any of the settings, simply touch the
START/RESET
pad to begin the cycle.
Also, if a power failure occurs,
NORMAL
and
HEATED DRY ON
will
automatically be programmed. Make any new selections and touch the
START/RESET
pad to begin the cycle.
Reset
To change a cycle after washing starts, touch the
START/RESET
pad to cancel the cycle. After water is pumped out and motor stops, you can reprogram and restart the dishwasher.
9
About the dishwasher cycle sequence.
You can locate your model number on the tub wall just inside the door.
Throughout this manual, features and appearance may vary from your model.
10
Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Cycle Sequence
Drying Options:
HEATED DRY ON.
Available on all wash cycles except
RINSE & HOLD.
Add approximately 32 minutes to the cycle.
HEATED DRY OFF.
Drying heater is turned off. Dishes dry naturally.
Water Time
Cycles (approx.) (approx.) Cycle Sequence
NORMAL 8.0 gal. 62 min. Prewash Prewash Prewash Main wash Prerinse Prerinse Final rinse
POT SCRUBBER 9.4 gal. 64 min. Prewash Prewash Prewash Main wash Prerinse Prerinse Final rinse
CHINA CRYSTAL 6.0 gal. 34 min. Prewash Prewash Prewash Main wash Prerinse Prerinse Final rinse
LIGHT WASH 6.7 gal. 56 min. Prewash Prewash Prewash Main wash Prerinse Prerinse Final rinse
RINSE & HOLD 1.5 gal. 4 min. Prewash Prewash Prewash Main wash Prerinse Prerinse Final rinse
Loading...
+ 22 hidden pages