Before using your
dishwasher, read this
guide carefully.
It is intended to help you
operate and maintain your new
dishwasher properly.
Keep it handy for answers to
your questions.
If
You
don’t understand
or-need more help, write (include”
your phone number):
Consumer Affairs
GE Appliances
Appliance Park
Louisville, KY 40225
To obtain a Spanish language
version of this book, call
GE Answer Center”name a
800.626.2000
consumer information service.
somethinx
If you received
a damaged dishwasher...
Immediately contact the dealer
(or builder) that sold you the
dishwasher.
Save time and money.
Before you request
service . . .
Check the Problem Solver in the
back of this
of minor
you can correct yourself.
Para
espafiol
GE Answer
servicio
para el consumidor,
telefono
guide.
It lists causes
ope;ating problems that
obtener
la version en
de
este
manual,
Center,@
de information
800.626.2000.
Write down the model
and serial numbers.
You’ll find them on a label
fastened to the tub wall just
inside the dishwasher door.
These numbers are also on the
Consumer Product Ownership
Registration Card that came
with your dishwasher. Before
sending in this card, please write
these numbers here:
Model Number
Serial Number
Use these numbers in any
correspondence or service calls
concerning your dishwasher.
~
YOU NEED SERVICE...
To obtain service, see the Consumer Services page in
the back of this guide.
We’re proud of our service and want you to be
pleased. If for some reason you are not happy with the
service you receive, here are three steps to follow for
further help.
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In most
cases, this will solve the problem.
ENERGY-SAV~G
●
Operate dishwasher only when it’s full.
dishes accumulate in dishwasher. When you put in
only a partial load, use the RINSE & HOLD cycle
to rinse off heavy soils.
●
Always select the cycle that uses the least amount
will
of water that
(See
the Operating section.)
remove the soil from the
Let the
load.
NEXT, if you are still not pleased, write all the
details—including your phone number—to:
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
FINALLY, if your problem is still not resolved, write:
Major Appliance Consumer Action Panel
20 North
Chicago, IL 60606
Wacker
Drive
T~S
●
If you don ‘t need your dishes right away, allow the
dishes to dry naturally over a longer period such as
overnight.
2
Page 3
WARNING-When
appliance, always exercise basic
A
●
Use
this
purpose, as
Use
and Care Guide.
.’,
‘Q.,”’; ~
* b
a. ‘
o
receive an Installation Instructions sheet with
dishwasher, you can obtain one by calling, toll
free,
the GE Answer
,—This appliance must be connected to a grounded
meti,
permanent wiring system; or an
equipment-grounding conductor must be run
with the circuit conductors and connected to
the equipment-grounding terminal or lead of
the appliance.
—Connect to a properly rated, protected and sized
power-supply circuit to avoid electrical overload.
I
*
..*
safety precautions, including the
following:
appliance only for its intended
you will find described in this
*This dishwasher must be properly
installed and located in accordance
. . .with the Installation Instructions
before it is used. If you did not
Centef1800.626.2000.
●
Do not store or use combustible
materials, gasoline or other
flammable vapors and
using this
your
Iiqtids
in the vicinity of this or any other appliance.
●
Use only powder or liquid detergents or wetting
agents recommended for use in a dishwasher.
●
Do not wash plastic items unless marked
“dishwasher safe” or the equivalent. For plastic
items not so marked, check the manufacturer’s
recommendations.
●
Load light plastic items so they will not
become dislodged and drop to the bottom of
the dishwasher—they might come into contact
with the heating element and be damaged.
To minimize the possibility of
●
When loading items to be washed:
A. Locate sharp items so that they are not likely
to damage the door seal, and
B. Load sharp knives with the handles up to
reduce the risk of cut-type
injuties.
i~ury.
s Do
not touch
immediately after use.
Q
Do not operate your dishwasher
panels are properly in
●
Do not
rack of the dishwasher.
●
Close supervision is necessary if this appliance
is used by or
to play inside, on or with this appliance or any
discarded appliance. Dispose of discarded
appliances and shipping or packing material
properly. Before discarding a dishwasher, remove
the
door of the washing compartment.
●
Keep
all
out of the reach of children, preferably in a locked
cabinet. Observe dl warnings on container labels
to avoid personal injury.
0.
%3
b~fore
attempting any maintenance.
Turning the control did to the 0~ position
does not disconnect the appliance from the
power supply.
technician service your appliance.
A
water pipes if hot water has not been used for a
period of two weeks or longer.
IS
EXPLOSIW.
damage or injury, if you have not used hot water
for two weeks or more, or moved into a residence
in which the hot water system may not have been
used for some time, turn on all hot water faucets
and
allow
using any electrical appliance which is connected
to the hot water system. This will allow any
hydrogen gas to escape. Also, since the gas is
flammable, do not smoke or use an open flame
or appliance during this process.
the
heating element during or
urdess
all enclosure
place.
abuse,
sit on, or stand on the door or dish
near
children. Do not allow children
washing detergents and wetting agents
*
To minimize the possibility of
electric shock, disconnect this
appliance from the power supply
NOTE:
We
recommend having a qualified
WARNING-H~ROGEN
is
produced by the chemical action
within your water heater. It can
accumulate in the water heater andor
H~ROGEN
To prevent the possibility of
them to run for several minutes before
GAS
GAS
SAVE THESE
INSTRUCTIONS
●
Do not tamper with controls.
3
Page 4
HOW TO OPERATE YOUR DISHWASHER
Your dishwasher is designed to give maximum
performance on loads with normal and heavy soils.
You may find that many of your dishes have lighter
soils than normal; if this is the case you can save
water and energy by selecting a cycle other than
NORMAL WASH.
NOTE: The lights over the Cycle and Energy
Option pads come ON to indicate the cycle/option
that has been selected. Press pad firmly until the
light comes on. These Cycle and Energy Option
Indicator lights remain on while the door is latched.
The
CYCLE ON light will come on when the
dishwasher is in a Start Delay, Wash or Dry
The light will go out when all cycles are complete.
If dishwasher drains into a food waste disposal, operate
the disposal until it is empty before starting dishwasher.
step
1.
Load your dishwasher. (See Loading section.)
step
2. Make sure the Cycle Indicator Dial is at
the
OFF position and the CYCLE ON light is
indicating
all
cycles are complete.
cycle.
off,
f
f;<,(l[ure,$
step 5.
POT- NORMAL WATER CHINA
SCRUBBER WASH
66666660
Cycles
(IrId (II)IJCIII-(III(C
)rzci> ),CII-J
.\l;ghtl>.
RINSE WASH HEAT
L
Select the desired Energy Options.
H;~]EOO[~~:~S
Energy Options
A
step
3. Latch the door.
step 4.
●
POTS
Select desired wash cycle.
CRUBBER—For
items such as pots, pans
and casseroles with dried-on or baked-on soils.
Everyday
get heavily soiled dishes cleaner than the normal
cycle. It will not remove burned-on foods.
● NORMAL WASH—For most loads of everyday
dishes, glasses and cookware with medium
Designed to yield high performance on normal soils.
● WATER SAVER—For dishes with light soils. This
cycle saves water by using
NORMAL WASH cycle.
● CHINA CRYSTAL—For lightly soiled china
crystal. The wash action is softened by pumping air
along
●
RINSE & HOLD—For rinsing partial loads which
will be washed later.
DelayundHeated Dry
thi.~ cycle.
dishes may be included. This cycle will
soils.
30Y0
less water than the
and
with the water to protect your delicate items.
D() not use
detergent.
Sturt
are not rec{)mmendedji)r
● WASH HEAT BOOST—Use the option for
best performance with heavily-soiled dishes.
When selected, the wash cycle is extended
while the dishwasher heats the water for the best
washing and drying. (See Cycle Selection Chart.)
. HEATED DRY—Turns the drying heater on
for fast drying. When selected, the cycle time
will be extended for 39 minutes.
●
HEATED DRY
off—Shuts
off the heating unit,
thus saving energy. Dishes air-dry naturally. It takes
longer but saves energy. You can open the door after
the motor stops to speed drying. Excellent for
overnight drying.
OPTIONS RESET—Turns all Energy Options off.
step
6. Turn the Cycle Indicator Dial to START
or to the desired START DELAY time.
●
Turning the dial to
immediately.
cycle,
be careful that you do not turn the dial any
START
wi}l
begin the cycle
To obtain the benefits of a complete
farther than is necessary to start the dishwasher.
There is a time delay between start-up and water
fill so you will not hear any wash action right away.
The START DELAY will allow you to delay the
start time of your dishwasher automatically for up
to
8
hours. Turn the Cycle Indicator Dial to the
desired time. The CYCLE ON light will come on.
4
Page 5
Dial Cycles
,/–—....
PUTE
WARMER
““””-”-”-”-i~”
(PRESS
HEATED DRY)
\-- ..---—--
‘TA~J~E~*~-*w
~..,,/.....,,+
-..
OFF
■
●
,.
\
.
.
. .
.
STAFtT
“\
,,
,,./’’”
;;:;
\
)
Quiet Power
The SHORT WASH cycle allows you to quickly wash
loads of everyday dishes with medium soils that have
not dried on, such as loads consisting mostly of glasses.
Start Delay cannot be used with this cycle.
a. Select the NORMAL WASH cycle and any Energy
Option if desired.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
SHORT WASH.
d. Latch the door to start the cycle.
Cycle Selection Chart
Wash
Cycle
Time
Minutes
68*
53**
53**
53**
45**
8
mmmmmmm
mmmBmm
mmmmmm
Wash Cycles
POTSCRUBBER
NORMAL WASH
CHINA CRYSTAL
WATER SAVER
SHORT WASH
RINSk:
& HOLD
Water Use
Gallons
(approx.)(approx.)
10,6
9.1
7.5
6.4
7.4
3.2
The PLATE WARMER
cycle
is for warming
clean dishes and serving plates for the serving of hot
foods. The cycle will take approximately
if selected. Start Delay cannot be used with
39
minutes
thi.~ cycle.
a. Load clean plates and dishes to be warmed
b. Select HEATED DRY.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Sequence
mmmm
Bmmmm
mm
*Unextended
**U”cxtcn~c~ tlm~.
HEATED DRY
HEATED
times.
DRY
These cycle times will
This
~y~l~ lim~ will
mr.
Available on all wash
nff. Drying heater
is turned
be
increased
b~
in~~cascd app.r~)x]md[c]y
cycles cxccp[
nfl. Dishes
dry naturally.
a~~rnxima[elv
RINSE & HOLD.
I I minutes it Wash
~ i minutes if’
Add 3Y
Hc~I[ B()()st option”
wash tica[ ~()()$(
minutes to
OPII(lI1 ihSCICCICLI.
w~sh cycle lime.
is
sclcctc(l
5
Page 6
Good
To
the entering water must be at least
Dishwashing
get dishes clean and dry, you need hot water. For good washing and drying,
Starts with HOT Water
120°F.
To prevent dish damage, inlet water should not exceed
How to Test Water Temperature
150°F.
Check your water temperature with a candy or meat
thermometer. Turn on the hot water faucet nearest
the dishwasher. Put the thermometer in a glass and
let the water run continuously into the glass until the
temperature stops rising. If the water temperature is
below
120°F.,
adjust your water heater.
How to Use a Rinse Agent
The rinse agent makes water flow off dishes
quicker than usual. This lessens water spotting
and makes drying faster, too.
For best
agent such as JET-DRY brand is recommended.
Rinse agents come in either liquid or solid form.
Your dishwasher uses the liquid form.
How
Unscrew the cap.
Add liquid rinse agent
until it just reaches the
bottom of lip inside the
dispenser opening.
Replace cap. The
dispenser automatically
releases rinse agent into
final rinse water.
You may check to see if you need to add rinse agent by
removing the fill cap and looking into the container.
You may also check the rinse agent, on some models,
by pressing the clear center of the fill cap 2 or 3 times.
If rinse agent is drawn into the center of the fill cap,
you have enough. If the center area remains clear
rinse agent.
dishwashing
to fill the rinse agent dispenser.
performance, use of a rinse
,b,
/
..,.,..
Q
&d
}
D
add
Helpful hints:
low, or if your water travels a long distance from water
heater to dishwasher, you may need to set your water
heater’s thermostat up. If you have not used hot water
for some time, the water in the pipes
on the hot water faucet at the sink and
until the water is hot. Then start the dishwasher.
you’ ve recently done laundry or run hot water for
showers, give your water heater time to recover before
operating the dishwasher.
To improve washability if the water is less than
120°F.
and you cannot adjust your water heater: Select
a longer cycle or the WASH HEAT BOOST option and
fill both detergent cups at least half-full with detergent.
Your dishwasher’s rinse agent container holds
approximately 4X ounces. This should last about
3 months.
If you accidentally spill: Wipe up the rinse
agent with a damp cloth. Don’t leave the spill in the
dishwasher.
If you can’t find any rinse agent, write:
BENCKISER CONSUMER PRODUCTS, INC.
(“JET-DRY”)
Corporate Centre
55 Federal Road
P.O.
Box 1991
Danbury, CT 06813-1991
If outside temperatures are unusually
will
be cold. Turn
allow
it to run
Fill
as needed.
It
can keep your detergent from working.
I
If
6
Page 7
How to Choose and Use the Right Detergent
Use
only powder or liquid detergent specifically
made for use in dishwashers. Other types will cause
oversudsing.
How much detergent
should
you use?
That depends.
Is your water “hard” or “soft”? With hard water, you
need extra detergent to get dishes clean. With soft water,
you need less detergent.
Your water department can tell you how hard your
water is. So
can your county extension agent or your
area’s water softener company. Just call and ask them
how many “grains” of hardness there are in your water.
Too much detergent with soft water not only wastes
money, it can be harmful. It can cause a permanent
Detergent Dispensers
cloudiness of glassware, called “etching.” An outside
layer of glass is etched away! Of course, this takes some
time. But why take a chance when it’s easy to find out the
hardness of your water.
Keep your detergent fresh and dry.
Under the sink
isn’t a good place to store detergent because there is
too much moisture. Don’t put
povTder
detergent into
the dispenser until you’re ready to wash dishes, either.
(It won’t be fresh OR
dry.)
If your powder detergent gets old or lumpy, throw it
away.
Old
detergent often won’t dissolve. If you use a
liquid dishwasher detergent, these precautions are not
necessary because liquid detergents don’t “lump” as
they age or come in contact with moisture.
You’ll find two detergent dispensers on the inside
door of your dishwasher. Two, because
some cycles use two washes.
See “Detergent
(Be
sure
the
DIAL is at OFF
U.\age
Guide
“below.
CYCLE INDICATOR
positi(m before
adding detergent. Otherwise,
the
deter<qent
(lose
and
Detergent
CYCLES
POTSCRUBBER
NORMAL WASH
WATER SAVER
CHINA CRYSTAL
SHORT WASH
RINSE & HOLD
:~ 1 ~ grains and up is extrelllely h~lrd
can
build up in the water valve. The water valve may stick while open
cup will
not
lat(h properl?.)
Usage
Guide
“~-<
(powder or liquid)
SO~
WATER (0-3
Main
Cup
Half
~Ull
H~ll Full
Use
no detergent
water. A water softener is recommended.
&f
I
+
Open
cup
grains
hardness)
Open Cup
Half Full
None
t
Close
the main cup.
NOTE:
been
T() open
detergent cup after it has
closed,
unlatch the door and rotate the
Cycle Indicator Dial a full turn
position.
.ioap
open p(~siti(m
Indi~ator
detergent and
MEDIUM WATER
Main cup
Completely
Full
Half’ Full
and
cause flooding.
When the
it is best that the
before rotating the
Dial. This will help reduce the amount
rin.ve
(3-7
grains)
Open Cup
~
Half Full
NoneCompletely
Use
no detergent
without it,
lime
~losed
cup contains
door
aid agent
$Filled
filled Open
t(]
the OFF
be in a
partially close tightly
Grasp handle,
rotate and
Cycle
(f
\pillage into
HARD WATER (7- 12
Main Cup$
Completely
Full
Full
Main Cup holds 3 tablespoons;
the tub.
grains*)
Open Cupt
J
Completely
Full
None
Use
no detergent
Cup holds 2 tablespoons.
How to Prepare the Dishes for Washing
If this is your first dishwasher, or if you’re
replacing a much older model, you may wonder
how much preparation your dishes need. Actually
very little. Scrape
and
other
hard
of
oil or grease.
off bones, seeds, skins, toothpicks
solids. Remove excessive quantities
NOTE: You may also want to consider removing
foods
such as mustard, mayonnaise, vinegar, lemon
juice and other foods that can cause discoloration of
stainless steel
if
allowed to remain on dishes for a long
period of time.
The POTSCRUBBER cycle can wash heavily soiled
dishes and remove dried-on and baked-on
soils
from
pots, pans and casseroles. Items with burned-on
soils need extra preparation.
7
Page 8
HOW TO LOAD YOUR
DISHWASmR
NOTE: Do not load large platters or trays in front right corner
of lower rack. They may prevent detergent from circulating in the wash cycle,
The upper rack is best for glasses, cups and saucers.
Cups and glasses fit best along the sides. This is also
the place for dishwasher-safe plastics. Make sure small
plastic items are lodged in tightly so they can’t fall onto
the heating unit. Arrange stemware so that it cannot
move easily. Don’t let the glasses touch each other.
.8
<
The upper rack is handy for all kinds of odd
shapes. Sauce pans,
should be
safe plastics make sure each plastic item is secured
over two fingers. This will insure good washing results.
The cup shelves (number may vary) may be placed in
the up or down position to add flexibility.
Keep center area clear in the lower rack.
The wash tower rises through the center of the lower
rack during the wash and rinse portions of the cycle.
Don’t block it or load tall things next to it. Also, be
careful not to let a portion of an item such as a pot or
dish handle extend through the lower rack. This could
block the wash arm and cause poor washing results.
placid face
mixing
dow~.
bowls and other items
When loading dishwasher
8
Page 9
The lower rack is best used for plates, saucers, and
cookware. Large items such as broiler pans and racks
should
platters, pots and bowls along the sides, in corners,
or in the back. For best washing results, all items
should be positioned with the soiled side facing the
center of rack.
go
in the
lower
rack along the edge. Load
Put flatware in the removable basket with handles up
to
protect your
so they don’t nest together. Distribute evenly.
Be sure handles do not touch upper
washing results be sure not to load
cookware between silverware basket
of the
rack.
hands.
Mix knives,
forks
and spoons
rack.
large
and
For best
plates and
the center
To increase the flexibility of the lower rack, the flexible
silverware basket may be split. Grasp the silverware
basket at opposite corners and slide apart. The silverware
basket
sections should be
hanging them
Don’t place the silverware basket in the front right comer
because the detergent could pour into it and damage
silverware.
on
the top hoop.
placed
in the lower rack by
9
Page 10
WHAT YOU CAN USUALLY WASH SAFELY
~
YOUR
DIS~ASHER
Material
Aluminum
Chinti
Stoneware
Crystal
Non-dishwashe]
items—such
as electronic
air cleaner
filters, furnace
filters, paint
brushes, etc.
Glass
kon
Pewter
Plastics
Stainless
Sterling silver
and silver plate
Non-stick
coatings
Tin
Wood
steel
Usually
Safe
Ym
YES
Ym
NO
YES
NO
NO
YES
Ym
NO
No
Exceptions (not safe)
Some colored anodized
aluminum can fade.
Antique, metal-trimmed,
hand-painted or over-the-glaze
fade,
patterns
will discolor.
Antique, metal-trimmed or
hand-painted patterns fade.
Gold leaf will discolor.
Iron will rust.
Pewter tarnishes.
Don’t put in
basket with stainless steel.
Contact between metals can
damage
Don’t wash copper utensils in
the
same
brown film.
Adhesive used to attach some
hollow-handle knives can loosen.
Tin can rust.
Wood can warp, crack or lose
its finish with any type of washing.
Gold leaf
same
silverware
silver.
load. Silver may get a
Special Instructions
Some darkening
scouring with soap-filled steel
If in doubt, check with the manufacturer. Or test wash
orte
piece daily for at least a month. Compare with the
rest of the set.
Load securely to prevent movement. Select CHINACRYSTAL cycle. Check your manufacturer’s
instructions for your crystal.
Do not wash in dishwasher. Damage to dishwasher
and discoloration or staining of dishwasher may result.
If
it doesn’t say DISHWASHER SAFE, test one piece in
the top rack before
Rinse if not washing immediately. Salty or acidic foods
can stain if left on.
Rinse if not washing immediately.
stain if left on. Dry detergent
black spots. Place in back section of silverware basket to
avoid exposure to detergent from the detergent cup.
After washing, wipe the non-stick coating area with
vegetable oil to keep it from losing its non-stick quality.
or spotting possible. Remove by
dishwashing in
wool
pads.
entire set.
Salty
can
or acidic foods can
cause difficult-to-remove
Forget a dish? Here’s when you can add it.
Add dishes any time during the RINSE & HOLD
cycle. With other wash cycles, you can add dishes
at any time BEFORE the main detergent wash portion
of the cycle.
However, opening the door during any cycle
lessens cleaning power. So try to load everything
at the beginning.
10
Here’s how to add a forgotten dish:
1. Push the door latch to the
left.
Washing will
stop.
2. Wait a few seconds until the water calms. Then
open the door. WARNING: Hot vapor may rise
from opened door.
3.
Add dishes you’ ve forgotten.
4.
Close
the door and push the latch to the
far
right.
When the door is locked, washing will continue.
Page 11
USER MAINTENANCE INSTRUCTIONS
Clean the control panel with a lightly dampened
cloth. Dry thoroughly. Do not use abrasives or
sharp objects on the panel. They
can
damage it.
Appliance Polish
WR97X0216)
Parts Centers.
Wax
& Cleaner (Cat. No.
is available from GE Service and
Clean the outside with a good appliance polishThe inside usually takes care of itself. If it should
wax. The outside cabinet finish is durable, but it
can scratch. So use no scouring pads, or harsh or
ever need cleaning, use a mild cleansing powder.
Scouring pads and harsh cleaners can mar the finish.
gritty cleaners.
Not Using Your Dishwasher in
If
your dishwasher is left in an
unheated place during the winter,
ask a service technician to:
● Cut off electrical power to the
dishwasher. Remove fuses or trip
circuit breaker.
● Turn off the water supply.
●
Disconnect the water inlet 1 ine
from the water valve.
Iinter?
Pump
Protect Against Freezing.
●
Drain water from the inlet 1 ine
and water valve. (Use a pan to
catch the water. )
● Reconnect the water inlet line to
the water valve.
● Remove the plastic pump cover
C;ver
Screws
in the tub bottom and use a
sponge to soak up water in
the rubber boot.
Built-in Dishwashers Often Use an Air Gap. Keep It Clean.
An air gap is a plumbing device.
It
protects your dishwasher against
water backing up into it if a drain
clogs. The air gap is not a part of
the dishwasher. And you may not
even have one. Not all plumbing
codes require air gaps.
Check the air gap any time your
dishwasher isn’t draining well.
If you have an air gap, check it at
least once a month. IT IS NOT
PART OF YOUR DISHWASHER.
IT IS NOT COVERED IN YOUR
WARRANTY.
The air gap is easy to clean.
With most types, first turn off the
dishwasher, then lift off the
chrome
cover. Then unscrew the plastic cap
and check for any buildup of grit.
A toothpick makes cleaning easy.
11
Page 12
HOW TO CHANGE COLOR PANELS
If you are redecorating, you can change your dishwasher’s front panels to
match or blend with your new colors by flipping them over. Each side of
each panel is a different color. You may also paint a panel with a color of
your own choice.
How to Change the Door Panel:
1. Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put the color
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Lower Panel:
Top
Mounting
‘crew
Top
Tnm
\
>-g
L~@
—
or
Tab
c
you
NOTE: Do not operate
dishwasher whilechanging
panels or when lower access
panel is removed.
1. Remove the bottom
“
2. On models without
the entire access assembly by
the retaining tabs.
3. On models with top mounting screws, remove
the screws.
4. Take out the top trim screws and remove the
top trim.
5. Slide the color panel(s) up and out and put the
color you want in front.
6. Replace the top trim and screws.
7. Replace the entire access assembly by reversing
the steps.
panel
attachment screws.
top
mounting screws, remove
lifiing
it up and over
Bottom Panel Attachment Screws
Adding 1/4” Wood Inserts
Color insert panels for both the door and the lower
panel can be replaced by 1/4” thick wood inserts to
match your kitchen cabinets. Get them from your
nearest cabinet or lumber dealer.
12
Dimensions for 1/4” wood inserts:
19X”
Door Panel:
Lower
Panel: 3’Xf~’
H x 23 X,” W.
H x
23YJ’
W.
NOTE: Do not operate dishwasher while changing
panels or when lower access panel is removed.
Page 13
PROBLEM
POSSIBLE CAUSE
DISHWASHER
WON’T RUN
UNUSUAL NOISE
DISHES DON’T DRY
UNCLEAN DISHES
AND FLATWARE
DETERGENT
IN DISPENSER CUPS
LE~
A fuse in your home maybe blown, or the circuit breaker tripped. Replace fuse or
reset circuit breaker. Remove any other appliances from the circuit.
Utensils may not be secure on rack pins, or something small may have dropped from the
rack. Water is causing utensils to rattle. Make sure everything is secured in dishwasher.
Make sure inlet water
temWrature
is correct, (See How to Test Water Temperature section.)
Unload the bottom rack first. Water from dishes in the top rack maybe spilling into
the bottom rack.
Make sure the Cycle On light is off, indicating the dry cycle (if selected) is complete.
Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.
Check the rinse agent dispenser to see that it’s not empty.
120°F.
Check inlet water temperature, It should be at least
(To test, see How to Test
Water Temperature section.) Try to use the Wash Heat Boost option.
Water pressure may be temporarily low. Turn on a faucet. Is water coming out slower
than usual? If so, wait until pressure is normal before using your dishwasher.
Plugged air gap. (See Care and Cleaning section.)
Improper rack loading. (See Loading section.)
Choose another cycle to give you longer washing time.
Water may not be reaching the detergent cups. Move dishes that maybe blocking
detergent cup.
DETERGENT CUP
LID WON’T LATCH
A~ER
DETERGENT
YELLOW OR
BROWN FILM
CYCLE AND OPTION
INDICATOR LIGHTS
ADDING
STAY ON WHEN
CYCLE IS
COMPLETED
The dispenser cover may not be opening or may be blocked by improperly loaded
items. If you used a powder detergent, open the cup and remove any caked-on
detergent. If the cup still doesn’t open automatically, call for service.
Detergent may be old. If the powder detergent is hard or caked in the box, throw it
away, The detergent may not be working well. Try another brand.
Cycle Indicator Dial must be in OFF position and Cycle On light must be off for
latch
cup lid to close and
properly. If you unlatch the door and open it to dry your
dishes, the Cycle Indicator Dial does not advance by itself.
Tea or coffee can
stain cups. Remove the stain by hand, using a solution of 1/2 cup
bleach and 3 cups warm water.
yellow
An overall
or brown film on dishes or glassware can be caused by iron
deposits in water. A special filter in the water supply line is the only way to correct
this problem. Your water softener company can tell you about the filter.
Yellow film on sterling silver results when you wash copper utensils in the same load.
Silver polish will usually remove this stain.
This is normal. Unlatch the door to turn off the Cycle and Energy Option Indicator lights.
NOTE:
The Cycle On light will stay on until all cycles are complete. Wait until this
light goes off to unlatch the door or a cycle will be interrupted.
((f)tllitzuc,[l ttt,xt [)uge’)
13
Page 14
●
r
●
A
THE PROBLEM SOLVER
(continued)
PROBLEM
SPOTS AND
FILMING ON
GLASSES AND
FLATWARE
POSSIBLE CAUSE
Spotting can be caused by all these things:
●
Extremely hard water. (See How to Choose and Use Detergent section. )
●
Low inlet water temperature. (See How to Test Water Temperature section.)
●
Overloading the dishwasher.
●
Improper loading. (See Loading section. )
●
Old or damp powder detergent.
●
Phosphate level in detergent too low. (See How to Choose and Use
Detergent section.)
Q
Rinse agent dispenser empty. (See How to Use a Rinse Agent section.)
●
Too little detergent. (See How to Choose and Use Detergent section. )
Local water conditions and personal preferences vary. Try several brands of
detergents to find one that gives the best results for you. A liquid dishwasher
detergent may help reduce filming.
To remove stubborn spots and
1. Remove all metal utensils from the dishwasher.
2. Do not add detergent.
3. Select POTSCRUBBER cycle.
4. Start the dishwasher and allow to run for 18 to 22 minutes. The dishwasher will
now be in the main wash.
5. Then open the door and pour 2 cups (500 ml) of white vinegar into the bottom of
the dishwasher.
6. Close the door and allow to complete the cycle.
If vinegar rinse doesn’t work:
acid crystals instead of vinegar. (Most drugstores carry citric acid crystals. If yours
doesn’t, call GE Factory Service.)
Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home
water softener.
film from glassware:
Repeat as above, except use 1/4 cup (60 ml) of citric
CLOUDINESS ON
GLASSWARE
CHIPPING OF CHINA
If vinegar or citric acid crystal rinse doesn’t work, the cloudiness is “etching.”
The film cannot be removed.
It can be prevented:
the shortest cycle that
Water temperature entering dishwasher exceeds
Rough handling can cause chipping. Load with care. Make sure glassware and china
are secure and can’t jar loose. (See Loading section.) Make sure
stemware will clear the top of the tub when you push the rack into the dishwasher.
Always use the top rack for delicate items.
Use less
will
get them
detergent if you have soft water.
clean.
150°F.
Wash glassware in
tall
glasses and
Page 15
●
●
1
m
PROBLEM
BLACK OR GRAY
MARKS ON DISHES
SMALL AMOUNT OF
WATER STANDING
IN THE
OF THE TUB
WATER WON’T PUMP
OUT OF THE TUB
SUDS IN THE TUB
DISHWASHER
LEAKS
BO~OM
POSSIBLE CAUSE
Aluminum utensils often leave marks when they rub against dishes, Remove marks
with a mild abrasive cleanser,
Water around the outlet on the tub bottom at the back of the tub is normal. It
water. It’s there to keep the water seal lubricated.
If the entire bottom of the tub has water, you may have a drain problem. Clean the air
gap,
if you have one. (See Care and Cleaning section.)
Is
Check the kitchen sink.
If dishwasher drains into disposer, run disposer to clear.
clogged,
Sudsing
DISHWASHER DETERGENTS TO AVOID
To remove suds from
1
by slowly turning the control dial until a drain period is reached.
Repeat
Suds can cause unit to overflow. That’s why it’s so important to use a detergent that’s
designed for automatic dishwashers.
detergents are not meant for dishwashers. USE ONLY AUTOMATIC
gallon of cold water to the tub. Close and latch the dishwasher. Pump out water
if
necess~.
it draining well? You may need a plumber.
Be
sure disposer is not
SUDSING.
the tub:
Open the dishwasher. Let suds evaporate. Add
is
clean
Spilling the rinse agent
Wipe up accidental spill of rinse agent with a damp cloth.
MOTOR HUMS
STAINING OF
TUB INTERIOR
SOUNDS YOU
WILL HEAR
VAPOR AT
THE VENT
If you need more help... call, toll free:
GE
Answer
800.626.2000
consumer information service
Center@
Dishwasher has not been used on a regular basis.
If you do not use your dishwasher often, set it to fill and pump out once every week.
This will help keep the seal moist, and
Some detergents contain colorant (pigment or dyes) that will discolor the tub
interior with extended use. Check the detergent cup for signs of any discoloration.
If cup is discolored, change to detergent without any colorant.
You’ll hear occasional clicking sounds. These are normal.
●
Soft food disposal shredding action.
●
Drain valve opening to pump water out.
●
Timer control as cycle progresses.
●
Detergent cup opening.
During the drying period:
●
The motor stops.
Water vapor comes through the vent by the door latch during drying and when
water is being pumped out.
can
cause foam during washing. This can lead to ovetiowing.
the
garbage disposer clear.
15
Page 16
NOTES
16
Page 17
NoTEs
17
Page 18
NOTES
18
Page 19
We’ll Be There
With the purchase of your new GE appliance, receive the assurance that
information or assistance from GE, we’ll be there. All you have to do is call—toll-free!
In-Home Repair Service
80MEXARES(80M32-273~
A
C,k:
consumer service professional will provide
schcdulcrl at a time that’s convenient for you. Many GE (;orrsumer Service
company-operated locations offer you service today or tomorrow,
convenience
Our
f’actory-trained technicians know your appliance inside and
repairs can be handled in just
(7:00 a.m. to
7:()()
p.m. weekdays,
one
visit.
expert
repair service,
or
at your
9:()()
a.m. to2:00 p.m. Saturdays).
ou-so
most
ifyou
ever need
GEAnswer
Center
a
8086262000
Wlra[ever your
information” service is available to help. Your call—and your question-will be
arrswcrecl promptly
(;erlter@
service is
question about
and courteously. And you can call any time.
open
24 hours a day, 7 days a
any
GE;
m?jor appliance,
week.
kr
Customers With Special Needs...
CJE
Answer Center@
(;E
Answer
80~626.2000
Upon r-equest,(;E wilt provide[lorrsumers with impaired hearing or
Braille
appliances, and a brochure
assist in planning a barrier-freeinformation or service.
kitchen for
rnobili(y.To
free
controls
of’charge, call 800.626.2000.
for a variety
persons with limited
obtain
these items,
of”
[o
(;E
accc’ss
to a
call
800-TDD-C;EAC
‘1’DIJ
Service Contracts
80@62&2224
speech
who have
or a conventional teletypewriter may
(800-833-4322) to request
You
can have the secure fkeling that ;E(Jorrsumer Service will still be
after yollrwarran{y expires.
eff’ect and
in
you’re assured of ’f
you’ll receive a substantial discount. With a multiple-year contract,
’uture
P~;;-ctl;~se
service at today’s prices.
a
C;E;
contract wh ilc
y(~ur
Patis andAccessories
80&626-2002
Individuals qualified to service their
can have
[llcit
47,()()() parts...atld
f’lllly
[Il”t” a(’(’c’p(t”(!
needed
tlotnc.
warranted. VISA, Master(Iard and
‘1’he
par[s or
(;E
all
accessories seu[directly tocover procedures intended to be performed by any user.
pat-ts
systemprovides access
(;F1
(;erruine
ow
appliancesUser maintenance instructions contained in this booklet
10
Renewal l’arts at-e
Discover
cards
over
there
warranty is still
Other servicing
service personnel.
improper servicing may cause unsafe operation.
gener~y shodd
Caution must be exercised, since
be referred to qualified
Page 20
YOUR GE DISHWASHER WITH
PERMATUp
INTERIOR
WARRANTY
Staple sales slip or
cancelled
check
here. Proof of original purchase date
is needed to-obtain service
under warranty.
I
WHAT IS COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we
will provide, free of
charge, patis and service labor in
your home to repair or replace
part of
the
dishwasher that fails
any
because of a manufacturing defect.
LIMITED SECOND-YEAR PARTS
WARRANTY
For the second year from date of
original purchase, we will provide,
free of charge, replacement parts for
anypa~
of
the
dishwasher that fails
because of a manufacturing defect.
You pay for the service trip to your
home and sewice labor charges.
WHAT IS NOT COVERED
LIMITED FIVE-YEAR
RACK WARRANTY
For five years from date of original
purchase, we will provide, free of
charge, replacement parts for any
● rack that rusts because of a
manufacturing defect.
You pay for the service trip to your
home and sewice labor charges.
FULL TWENTY-YEAR
TUB~OOR
LINER WARRANTY
For twenty years from date of original
purchase, we will provide, free of
charge,
your home to repair or replace
patis
and service labor in
the
PermaTu~ tub or door liner if it
faiiS
to
contain water because of a
manufacturing defect.
●
Sewice trips to your home to teach
you how to use the product.
Read your Use and Care material.
If you then have any questions
about operating the product, please
contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:
GE Answer Center”
800.626.2000
consumer information service
●
Improper installation.
If you have an installation problem,
contact your dealer or installer. You
are responsible for providing
This warranty is
efiended
to
the original purchaser and any
succeeding owner for products
purchased for
the 48 mainland states, Hawaii and
Washington,
ordina~
D.C.
home
use in
In Alaska the
warranty is the same except that it is
LIMITED because you must pay to
ship the product to the service shop
or for the sewice technician’s travel
costs to your home.
All warranty sewice will be
provided by our Factory Service
Centers or by our authorized
Care@
Customer
servicers during
normal working hours.
Should your appliance need
during
sewice,
warranty period or
beyond, call 800-GE-CARES
(800-432-2737).
adequate electrical, plumbing, and
other connecting facilities.
●
Replacement of house fuses or
resetting of circuit breakers.
●
Cleaning or sewicing of air gap
device in drain line.
●
Failure of the product if it is used for
other than its intended purpose or
used commercially.
●
Damage to product caused by
accident, fire, floods or acts of God.
WARRANTOR IS
NOT
RESPONSIBLE
FOR CONSEQUENTIAL DAMAGES.
Some
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
‘his book is printed on recycled paper.
Part No.
Pub No. 49-5673
,
165
D4700POII
!
4-94 CG
Warrantor: General Electric Company
GSD1300
Series
Printed in Louisville, KY
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.