GE GPF65 Installation manual

Installation

Install 2 Screws Each Side

Side

Mounting

Brackets

Countertop Mounting Brackets

Tub Frame

Instructions

GPF65

Side Mounting Brackets

PARTS SUPPLIED WITH KIT

¨ 2 Side mounting brackets with 4 mounting screws

Side Mounting Brackets

4, #8 Pan head Phillips Screws

3/8" long for side mounting

PARTS SUPPLIED WITH DISHWASHER

2 Wood mounting screws

TOOLS YOU WILL NEED:

¨ Phillips head screwdriver

¨ Measuring tape

¨ Safety glasses

¨ Gloves

Measuring Tape

Gloves

STEP 1 DISCONNECT WATER

AND POWER

• Turn off water supply.

• Turn off power supply.

STEP 2 INSTALL BRACKETS

• Pull dishwasher out of the opening just enough to access the tub frame.

• Fasten a side mounting bracket to each side of the tub with the #8 pan head screws provided.

• Position dishwasher so that the door lines up with the front face of adjacent cabinet.

IMPORTANT: Check to be sure the dishwasher is centered in the opening and there is no interference with adjacent cabinets when opening or closing the door.

Non-Wood Countertop

Phillips Head Screwdrivers Safety Glasses

On new installations, do not remove wood base until you are ready to install the dishwasher. The dishwasher will tip over when the door is opened.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Side Brackets

3/4"

• Fasten the brackets to cabinet sides using the 2 Phillips head countertop screws.

IMPORTANT: Drive screws straight and flush. Protruding screw heads may scratch the top or sides of the control panel and can interfere with door closing.

Pub. No. 31-30538 Dwg. No. 206C1559P078

(N.D. 289) 9/01