JB655DK
GE Appliances 30" Free-Standing Electric Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
RECEPTACLE LOCATIONS
Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against wall.
NOTE: This appliance has been approved for 0” spacing to adjacent surfaces above the cooktop. However, a 6” minimum spacing to surfaces less than 15” above the cooktop and adjacent cabinet is recommended to reduce exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION: Before installing, consult installation instructions for current dimensional data and additional requirements.
KW RATING
240V 12.5
208V 9.4
BREAKER SIZE
240V 40 Amps†
208V 40 Amps†
†NOTE: Check local codes for required breaker size.
|
30" |
2-1/2" |
|
|
25" |
ACCEPTABLE ELECTRICAL |
2-1/2" |
OUTLET AREA |
|
|
11" |
29-7/8" |
7-1/2" |
47"
35-3/4" to
36-1/2"
25-3/8" w/o handle
28"
w/handle
47-5/8"
All GE ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation
of the range.
Listed by Underwriters Laboratories
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or |
|
GE Appliances product questions, visit our website at geappliances.com |
|
or call GE Answer Center® Service, 800.626.2000. |
Specification Revised 2/16 |