GE GERECTWODWRH351 Specs

pp9036sJ

PP9036SJ, PP7036SJ, JP5036SJ

GE Profile

DImensIons anD InstallatIon InformatIon (In Inches)

™

Series 36" Built-In Touch Control Cooktop

Important: Requires a 5" free area between the bottom of the cooktop to any combustible material, i.e., shelving. Free area not required when installing wall oven underneath cooktop. Refer to installation instructions. Requires a 15" minimum from cooktop to adjacent overhead cabinets. Units are furnished with a 48" flexible armored cable.

note: 36" Ribbon cooktops are approved for use over select GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/warming drawer installation instructions packed with product for current dimensional data. If installed with a GE Telescopic Downdraft System, consult both the cooktop and downdraft installation instructions packed with product before installing. Cooktop gas/ electric supply may need to be re-routed to install downdraft. The countertop cutout requires 23-1/2" minimum flat countertop surface and 25" minimum total countertop depth. In addition, other clearances to front edge of the countertop must be considered.

Before installing, consult installation instructions packed with product for current dimensional data.

approxImate cookIng DImensIons

20-1/2"

33-3/4"

3-1/4" at front of unit and 6" at conduit location

18-7/8"

1-3/4" MIN. to rear wall

2-1/2" MIN.

Required

To insure accuracy, it is best to make a template when cutting the opening in the counter

KW Rating

9.6

240V

8.3

208V

Amperage

240V

208V

40 Amps

†

36-1/8"

Cooktop

33-7/8"

to 34"

†

note: Check local codes

for required breaker size

19-1/8" to

19-1/4"

13" MAX. depth of unprotected overhead cabinets (when no hood or microwave is installed)

30" MIN. from countertop to unprotected cabinet (when no hood or microwave is installed)

See label next

to nameplate for

MIN. clearance

to wall

Electrical junction box 16" MIN.

below countertop

2" MIN. clearance to side wall from cut-out on both sides of cooktop

15" MIN. height from countertop to nearest cabinet (including light rails) on both sides of cooktop

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.

Listed by Underwriters Laboratories

Specification Created 1/15

pp9036sJ

GE Profile

features anD BenefIts Five radiant cooking elements - Cook foods quickly and evenly on this sleek, glass surface

Glide touch controls - Precisely control heat instantly and easily with one swipe

6"/9"/12" tri-ring element - Use different pan sizes on this single, 3,000-watt flexible element

5"/8" Power Boil element - Use different pan sizes on this single, 2,400-watt flexible element that produces rapid powerful heat

SyncBurners - Control two 7" elements simultaneously to evenly heat large cookware or griddles*

Multi-element timer - Manage up to five pans at once with individual timers for each element

™

Series 36" Built-In Touch Control Cooktop

Control lock capability - Protects against unintended activation

Custom Settings - Personalize your cooktop settings to fit your cooking style

Red LED display with black glass surface and stainless steel trim - Achieve a modern look that complements the entire kitchen and other stainless steel appliances

Hot surface indicator lights - Know when elements are too hot to touch with a quick glance

Model PP9036SJSS - Stainless steel

* optIonal staInless steel claD

alumInum grIDDle

Achieve even results with this lightweight griddle, tailored to fit GE SyncBurners. Order part number JXGRIDL1 from your GE Dealer.

Specification Created 1/15