![](/html/2a/2a50/2a500e3b73abba703d4930931993229a7e3242c17f032ab516bb3f2bfa6c98e9/bg1.png)
JKS3000DN/SN
Cutout width
25" MIN.
25-1/4" MAX.
A
C
Cutout height
27-5/8" MIN.
28-1/8" MAX.
Recommended
cutout location
from the floor
32-1/2"
27''
PKS7000BNTS, PKS7000FNDS, PKS7000SNSS,
CKS70DM2NS5, CKS70DP2NS1, JKS3000DNBB,
JKS3000DNWW, JKS3000SNSS, JKS5000DNBB,
JKS5000DNWW, JKS5000SNSS
Cabinet 27"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 1"
C - Overlap of oven at bottom of cutout 1"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-7/8"
F - Overall width 26-3/4"
Cutout width
25" MIN.
25-1/4" MAX.
B
A
C
Cutout height
27-5/8" MIN.
28-1/8" MAX.
Recommended
cutout location
from the floor
32-1/2"
27''
F
E
22"
Conduit
48"
Cutout depth
23-1/2" MIN
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
8-3/4" MAX.
D
PKS7000BNTS, PKS7000FNDS, PKS7000SNSS,
CKS70DM2NS5, CKS70DP2NS1, JKS3000DNBB,
JKS3000DNWW, JKS3000SNSS, JKS5000DNBB,
JKS5000DNWW, JKS5000SNSS
Cutout width
25" MIN.
25-1/4" MAX.
B
A
C
Cutout height
27-5/8" MIN.
28-1/8" MAX.
Recommended
cutout location
from the floor
32-1/2"
GE® 27" Built-In Single Electric Wall Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
NOTE: Single wall ovens are NOT approved
for stacking above or below another single
wall oven.
NOTE: Wall coverings, countertops and
cabinets surrounding the wall oven must
be able to withstand a temperature of up to
200°F (94°C).
NOTE: If the cabinet in which the wall oven
is installed does not have a solid bottom, two
braces or runners must be installed to support
the weight of the oven. The runners and
braces must support up to 220 lbs (99 kg).
NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
ATTENTION IN S TA L L E R: Electric wall
ovens are NOT approved for installation with
a plug and receptacle. They must be hard
wired into an approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with product
for current dimensional data.
KW RATING
24 0V 3.6
208V 2.7
BREAKER SIZE
24 0V 20 Amps
208V 20 Amps
For answers to your GE Profile™ Series or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Suitable
bracing
to support
runners
23" minimum
door opening
allowance
E
(must support 220 lbs.)
C
L
F
Conduit
48"
D
22"
Dimension and installation information are shown in inches.
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
8-3/4" MAX.
Cutout width
25" MIN.
25-1/4" MAX.
Cutout depth
23-1/2" MIN
27''
A
C
Cutout height
27-5/8" MIN.
28-1/8" MAX.
Recommended
cutout location
from the floor
32-1/2"
Junction box
location
22" to
bottom of
junction box
B
JKS3000
Cabinet 27"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 1"
C - Overlap of oven at bottom of cutout 1"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-7/8"
F - Overall width 26-3/4"
Listed by
Underwriters
COMPLIANT
Laboratories
Specification Rev ised 1/19