GE FG5 Specification Sheet
With
EZ Connect
ORDERING NUMBER
FG5
LOGIC
PRODUCT
IDENT
XXX
FG5 =
Filterglow
400 Luminaire
G
COLOR
X
G = Gray
W = White
40
WATTAGE
XX
25 = 250
32 = 320
35 = 350
40 = 400
PHOTOMETRIC SELECTION TABLE
E7 OPTICAL - Enclosed 17 in. Reector
Light Spacing Socket Photometric Optical
Wattage Source Criteria Position Curve Code Code
250, 320* EPMH 1.3 1 176084 E7 EM
350, 400 EPMH 1.1 11 174961 E7 EX
350, 400 EPMH 1.3 9 174962 E7 EU
350, 400 EPMH 1.6 5 177096 E7 EQ
350, 400 EPMH (Coated) 1.0 11 174955 E7 EX
350, 400 EPMH (Coated) 1.5 7 174957 E7 ES
350, 400 EPMH (Coated) 1.9 3 174958 E7 EO
250 - 400 HPS 1.0 5 174965 E7 EQ
250 - 400 HPS 1.4 3 174966 E7 EO
E2 OPTICAL - Enclosed 22 in. Reector
Light Spacing Socket Photometric Optical
Wattage Source Criteria Position Curve Code Code
350, 400 EPMH 0.7 7 174959 E2 ES
350, 400 EPMH (Coated) 0.7 11 174953 E2 EX
250 - 400 HPS 0.7 2 174963 E2 EN
320 watt, ED28 pulse start MH
*
FG5 FILTERGLOW ® 400 LUMINAIRE
High Bay, Enclosed — Optical Sliding Disconnect Series
APPLICATIONS
• For over 20 ft . (6 meter) applications in factories, foundries, machine
shops, and other industrial environments
SPECIFICATION FEATURES
• 1598 Listed
Suitable For Damp Locations
• Listed to Canadian
standards and codes
• Enclosed and gasketed optics
• Clear tempered door-glass
TM
lens
• Charcoal ltered optics
• Unique optical sliding
disconnect
• 55° C ambient, standard
• In-line EZ ConnectTM plug-in
adapter port allows for:
• hook/loop, cord & NEMA plug
S
LIGHT
SOURCE
X
E = Energy
Act Compliant Pulse MH
(EPMH)
S = HPS
For
International
Markets only
M = MH
P = Pulse
Start
MH
Note: Lamp is
vertical base
up. Lamp not
included.
0
VOLTAGE
X
60Hz
0 = 120/208/
240/277
MULTIVOLT
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
F = 120X347
T = 220
50Hz
6 = 220
R = 230
Y = 240
G= 380
A
BALLAST
TYPE
X
See Ballast
Selection
Table
A = Autoreg
D =
System
3 Bilevel
Autoreg (See
Technical
Section)
G = CANADIAN Mag-Reg
(Grounded
Socket Shell)
H =
HPF Reactor
or Lag
L =
Super Low
Loss Autoreg
M = MagReg
E7
OPTICAL
CODE
XX
E7=
17 in.
Reector
E2=
22 in.
Reector
• plug-in diagnostics
capability
• plug-in modular wiring
systems
• plug-in fuse kits
• Symmetrical heavy-duty
die-cast aluminum ballast
housing with polyester
powder gray or white paint
nish
• Single casting integral
hook/loop and mounting
plate is available
• Threaded slide-in mounting
adapter for easy mounting
Enclosed
Enclosed
EX
PHOTOMETRY
CODE
XX
XX = Select
Code
Below
Photometry
Photometry
11
MOUNTING
CODE
XX
XX = Select Code Below
11 = Pendant mounting
13 = Provision for Slide-on Primary Electrical
Disconnect. Order TWOBP Box (Thru Feed
Capability Only) Separately.
(Not available with D and W option)
14 = Provision for Slide-on Primary Electrical
Disconnect. (Pendant and Thru Feed
Capability) Order PED Box Separately
(Not available with D and W option)
15 =
Prewire with EZ-Loop, Cord and Plug Part of
“Power Hook”. Order Receptacle/Hook Box
Separately. (Not CSA/CUL)
31 =
Prewire with EZ-Hook, 3-ft (0.9 Meters) #16/3
Cord, and Nema Plug
33 =
Prewire with EZ-Loop, 3-ft (0.9 Meters) #16/3
Cord, and Nema Plug (Order locking
receptacle hook box separately.)
67 = Pendant, Nut and Hanger Hub Mounting.
(For use with “D” or “W”, Wet Locations
Option, only) (See pages I-153 and I-154
for details)
MODULAR PREWIRE
41 = ACS with 3-ft (0.9 meter) cord & EZ-Hook
69 = ACS with 6-ft (1.8 meter) cord & EZ-Hook
43 = ACS with 3-ft (0.9 meter) cord & EZ-Loop
70 = ACS with 6-ft (1.8 meter) cord & EZ-Loop
44 = ACS with 9-ft (2.7 meter) cord & EZ-Loop
PLUG-N-GO
51 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Hook
71 = Plug-N-Go with 6 ft. (1.8meter) Cord & Hook
53 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Loop
72 = Plug-N-Go with 6 ft. (1.8 meter) Cord & Loop
Note: ACS = Flex 3+
Plug-N-Go = FSC Series
• Adjustable mogul base
socket -E39 standard
• ALGLAS® nish on
faceted reector
• Safety chain provisions
• Shipped as components:
Ballast, Optical.
Magnapack available for
ballast
See Technical Section
• Pulse start system for metal
halide available. See Page I-131
B
OPTIONS
X
A = 65°C maximum
ambient*
B = Time Delay
Automatically
Switched
Quartz
D = Severe Duty
(meets Wet
Location)
(For use with
Mounting Code 67
only)
F =
Fusing (Not available
with D or W option)
G = Secondary Wiring
Access. 7/8 in. dia.
knockout
(Not available with
D or W option)
Q = Non-Time Delay
Automatically
Switched Quartz
R = Non-Switched
Quartz.
T = E40 / European
Socket
W = Wet Location
(For use with
Mounting Code 15
and 67 only)
Y = Solo Bilevel Port
(See page I-102)
Note: See page I-104
for Accessory Index and
Descriptions.
Note: See page I-129 for
explanation of Options.
*65°C available for 250
and 400 watt Auto Reg
Ballast only.
I-36/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Most commonly ordered
FG5 FILTERGLOW ® 400 LUMINAIRE
High Bay, Enclosed
DIMENSIONS
• When optical assembly contains a quartz socket (switched or
non- switched), an additional 1.125 inches (29mm) must be added
to the overall height due to double stack disconnect.
• For wet location dimensions 1.72 inches (44mm) must be added
to overall height.
NOTES
See explanation on ”Optical Flexibility“ Page I-5. See References.
REFERENCES
See Page I-104 for start of Accessories.
See Page I-117 for Component Ordering Logic.
See Page I-129 for Explanation of Options and Other Terms Used.
DATA
Approximate Net Weight lbs kgs
Ballast and Optical 30-45 14-20
FIXTURE DIMENSIONS
BALLAST SELECTION TABLE
60HZ 50HZ
120, 208 120
Light 240, 277 x
Wattage Source Multivolt 480 347 347 220 220 230 240 380
250 HPS A,M A,D,G,L,M A ,D,G,L A A,H A,H,M A,H A,H M
400 HPS A,M A,D,G,L,M A ,D,G,L A A,H A,H,M A,H,M A,H,M M
250 MH A A,D,L A,D,L A A A A A N/A
400 MH A A,D,L A,D,L A A A A A N/A
PULSE START METAL HALIDE LIGHT SOURCE
BALLAST SELECTION TABLE
250 EPMH A A A N/A N/A N/A N/A N/A N/A
320 EPMH A A A N/A N/A N/A N/A N/A N/A
350 EPMH A A A N/A N/A N/A N/A N/A N/A
400 EPMH A A A N/A N/A N/A N/A N/A N/A
NOTE: N/A = Not Available
* H is HPF-Linear Reactor available as 277 volt only.
Cannot be used with Automatic Switch Quartz Option.
CANADIAN NOTES:
1. “A”, Autoreg, and “D”, Bilevel Autoreg available 120, 277 or 347 volts only
2. 208, 240, and 480 volts require CWI ballast. Use “G” when available. Contact factory for
all others.
3. Multivolt not available.
4. 208, 240 and 480 volts with “G” ballast not available with switched quartz.
Ballast Type / Voltage
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
2008/I-37
Loading...