GE ELS-24DC, ELSV-60 User Manual
GE
Inspection Technologies
Light Sources
Remote Visual Inspection
Brilliant White Light
In dark industrial environments, you need high quality
lighting to get optimum inspection results. Our 24 Watt
and 60 Watt Solarc® light sources provide brilliant white
light for industrial borescope and fiberscope inspections.
For a more versatile inspection, our 120 Watt light
source provides UV and white light output.
When clarity and precision are essential, count on the
Everest line of light sources to provide the brightest light
output for your inspection.
ELSV-60
60 Watt Metal-Halide Light Source
Video pass-through channel eliminates the need for extra
cables and power cords
Bright color box ensures easy visibility during night inspections
Safe and user-friendly lamp system does not produce
excessive heat
Dual video outputs allows for viewing on two separate
monitors at the same time
The ELSV-60 features patented, field-proven Solarc® lamp
technology that’s unlike anything else in the industry. This
technology has a greater efficiency than halogen or xenon lamps
when transferring light into a small fiber bundle such as those
found in borescopes and fiberscopes. The lamp runs on only
60 W, keeping the ELSV-60 small and lightweight, and providing
high-intensity white light without producing the excessive heat
associated with 300 W xenon light sources.
The ELSV-60 offers a video channel for simple camera setup and
operation. An intuitive single cable connection provides power to
the camera and carries the signal from the camera back to the
light source. Video outputs on the front panel provide the signal
to a monitor or video recording device via composite and/or SVHS connectors.
Specifications
Power Ratings
Power In: 100-240 VAC
Fuse Set: 2 each 2.0 A, 250 V, type F (fast acting), 5 x 20 mm
Physical
Dimensions: 23 x 23 x 9.3 cm (9.0 x 9.0 x 3.7 in.)
Weight: 2.4 kg (5.3 lbs.)
Illumination System
Lamp: Solarc Metal Halide, 60 W, 60 V
Color Temperature: 6500 k
Median Lamp Life: 1000 hours
Intensity Control: Manual shutter (0 to 100 % output)
Light Guide Inter face: Olympus® Standard
Environment
Operating Temperature: 0 to 60ºC (32 to 140ºF )
Operating Humidity: 0 to 95% rh, non-condensing
Storage Temperature: -23 to 60ºC (-10 to 60ºF )
Storage Humidity: 30 to 75% rh, non-condensing
Video Pass-Through Channel
Multifunction cable connection provides power and composite/S-Video from input
device* to output device/monitor.
Connec tor type: Hirose (HR10A-10R-12S)
*To reduce eye strain or to allow multiple viewers, a fiberscope or rigid borescope
inspection can be captured by a camera using a BCAM-1000 C-mount video camera
and displayed on a video monitor. Ask a GE Inspection Technologies sales professional
about part number – CAM/LS SET 60
LPT blades in a turbine engine Components on a printed circuit board
BCAM-1000
Video In
Light Exit
Accessories
Part Number Description
SPL-600 Replacement lamp
Video Out
Fiberscope camera system using ELSV-60 video pass-through
Loading...