GE EWSW, EESW Data Sheet

GE

Lighting

™

Evolve

Modular Fixture - Wall Pack & Egress (EWSW & EESW)

LED Area Light

imagination at work

Product Features

The GE Evolve™ LED Area Light also offers a wall pack that delivers the same outstanding performance as the modular
area light solution. Using the same light engines as the “single module” area light, the wall pack offers identical
photometrics, which allows lighting designers to capitalize on the same features without compromise. In keeping with
a sleek design strategy, this product offers a modern “wedge” look, balancing the need for photometric scalability
with reliable workhorse performance. The wall pack provides 10 photometric combinations, available in two color
temperatures, to meet a wide range of application needs. The same wedge platform also offers an egress option to
compliment the family, and providing a complete and consistent look for all area lighting applications.

GE’s exclusive optical ring design effectively directs the light and produces superior vertical illuminance. Additionally,
reduced energy consumption, combined with a long rated life that virtually eliminates ongoing maintenance expenses,
enables the Evolve LED Wall and Egress to provide significant operating cost benefits over the life of each fixture.

Applications

• Wall mounted, single module site, area, and general
lighting utilizing
high uniformity,
reduced offsite visibility, reduced on-site glare and
effective security light levels.

advanced LED optical system providing

excellent vertical light distribution,

Housing

• Cast aluminum housing.

• Sleek architectural wedge design incorporates a
modular heat sink light engine directly into the unit
ensuring

• Meets 2G vibration per ANSI C136.31-2010.
For 3G rating contact manufacturer.

maximum heat transfer and long LED life.

LED & Optical Assembly

• Structured LED arrays for optimized area light
photometric distribution.

• Evolve modular light engine consisting of nested
concentric directional reflectors designed to optimize
application efficiency and minimize glare.

• Utilizes high brightness LEDs, 70 CRI at 4000K and
5700K typical.

• LM-79 tests and reports are performed in accordance
with IESNA standards.

Mounting

• Convenient swing out wall mount to “J” box with
inspection hole for IP 65.

Finish

• Corrosion resistant polyester powder painted,
minimum 2.0 mil. thickness.

• Standard colors: Black & Dark Bronze.

• RAL & custom colors available.

Electrical

• Wall Pack: 120-277 volt and 347-480 volt available.

• Egress: 120-277 volt universal electronic driver.

• System power factor is >90% and THD <20%.

• Class “A” audible sound rating.

• Integral surge protection non-dimming:

- For 120-277VAC per IEEE/ANSI C62.41.-1991,
4kV/2kA Location Category B2 (120 Events)

- For 347-480VAC per IEEE/ANSI C62.41.-1991,
6kV/3kA Location Category B3 (120 Events)

• EMI: Title 47 CFR Part 15 Class A.

Lumen Maintenance

• System rating is L85 at 50,000 hours. Contact
manufacturer for Lxx rating (Lumen Depreciation)
beyond 50,000 hours.

Ratings

• listed, suitable for wet locations.

/

• IP 65 rated optical per ANSI C136.25-2009.

• Temperature rated at –40° to 40°C (–40° to 35°C
for 347-480V fixtures).

• Upward Light Output Ratio (ULOR) = 0.