GE DLB3900S, DLL3980S, DLB3800S, DLL3880S, DLB3600s Use and Care Manual

...
Page 1
How to
get
the best
born
Your
Contents
Appliance Registration Automatic Dmin~
Care and Cleaning Consumer Services
Cycle Settings Dryer Exhaust
Energy-Saving Tips Fabric and Drying Guide
Important Phone Numbers 15
fiits
Drying Tips
Light Bulb Replacement Lint Filter
Loading Model and Serial Numbers 2
Operating the Dryer
Perrn.
Press Drying Tips 8, 13, 14
Press Guard Feature Problem Solver
2
8
11 15
7
11
5
10
8, 13
11
7, 11
7,9
6-8
7
12-14
Diner
d
Use and Care
of Models
DB3900S
DU3980S
DB3800S
DU3880S
Dm3600s
DU3680S
DB3400S
DU3480S
Safety Instructions
Signal
Sorting
Storing Dryer
Timed Drying User Maintenance Instructions 11
Warranty
GE Answer
800.626.2000
Center@
Back Cover
3-5 7,8
7,9
11
8
Page 2
~LP
US,~LP
YOU...
Read this book carefully.
It is intended to help you operate and maintain your new dryer properly.
Keep it handy for answers to
your questions. If you don’t understand something
or need more help, write (include your phone number):
Consumer Affairs
Hotpoint
Appliance Park Louisville, KY 40225
WA~NG: For the risk of fim
your safety the information in this manual must
or explosion or to prevent property damage,
Save time and money.
Before you request service . . . check the Problem Solver section. It lists causes of minor operating problems that you can correct yourself.
If you received a damaged dryer...
Immediately contact the dealer (or
builder) that sold you the dryer.
person~
Write down the model and serial numbers.
You’ll find them on a label on the front of the dryer behind the door.
These numbers are also on the Consumer Product Ownership Registration Card that came with your dryer. Before sending in this card, please write these numbers here:
Model Number
Serial Number
Use these numbers in any correspondence or service
calls
concerning your dryer.
be
followed to
injury or loss of
rnirdmize
life.
—Do
—-T
I
All drying instruction terms in this book conform to the Care Labeling Rule established by the Federal Trade Commission, January 1984.
not store or use
flammable
gasoline or
vapom and
other
liquids in
vicinity of this or any other
TO DO IF
o
Do not try to
*
Do
not touch
not
use any phone in your building.
do
Clear the
room, butiding
YOU S~LL GAS
tight any app~nce.
any
eledrid switih;
or area
dl wcupants.
the
apptiance.
of
Immediately call your gas supplier from a
neighbor’s phone.
instrudions,
If you
WM
the
—Instigation and service
by a
qti~ed insta~er,
the gas
If you need service
To obtain service, see the Consumer Services page in the back of this book.
We’re proud of our service and want you to be pleased. If for some reason you are not happy with the service you receive, here are three steps to follow for further help.
FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the details—including your phone number—to:
Manager, Consumer Relations
Hotpoint
Appliance Park Louisville, KY 40225
FINALLY, if your problem is still not resolved, write:
Major Appliance Consumer Action Panel 20 North Chicago, IL 60606
Follow
mrmot
reach your gas
fire
department.
suppfier.
Wacker
Drive
the
gas supplier’s
suppliert
must
be performed
service agency or
I
2
Page 3
WORTANT
SAFEH
~STRUCTIONS
Read W
IMPORTANT SAFETY
The California Safe Drinking Water and Toxic Enforcement Act requires the governor of
California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm and requires businesses to warn customers of potential exposure to such substances.
Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or
Properly adjusted dryers will minimize incomplete
combustion. Exposure to these substances can be
minimized further by properly venting the dryers
to the outdoors.
Warning—To reduce the risk of fire,
A
electric shock, or injury to persons
when using your appliance, follow basic
LP
fuels.
imtmctiom
NOTICE
before
precautions, including the following:
Use
this
appfiance
purpose
‘g.,’< Q
<{~ ~
=.-,,
,=
o
is used,
Instructions sheet with your dryer, you can obtain one by calling, toll free, the GE Answer Center”,
800.626.2000.
as described in this Use and Care Book.
This
and located in accordance with the
Instigation Instructions before it
If you did not receive an Installation
only for its intended
dryer must be properly installed
—Properly ground to conform with
all governing codes and ordinances.
Follow details in
—Locate where the temperature is above
(lO°C.)
control system. Do not install or store the dryer where it will be exposed to the weather.
for satisfactory operation of the dryer
hstallation
Instructions,
50°F.
—Connect to a properly rated, protected
and sized power supply circuit
electrical overload.
—Exhausting to the outside is STRONGLY
RECOMMENDED
of moisture and lint from being blown into the room. Carefully follow the Exhausting Details
in
the Installation Instructions.
to prevent large amounts
to avoid
ushg tfis
recommended in this Use and Care Book or in published user-repair instructions that you understand and have the skills to carry out.
*
or junction of cord and plug. Make sure that the cord is located so that it will not be stepped on, tripped over or otherwise subjected to damage or stress.
applimce.
*
Do not repair or replace any
part of the appliance or attempt any servicing unless specifically
When disconnecting this appliance
pull by the plug rather than the cord
to avoid damage to the cord
To Minimize the Possibility of a Fire Hazard
. Exhaust
Use
Duct+ee
otiy
rigid metal or flexible metal 4“
Installation Instructions.
diameter ductwork inside the dryer cabinet or for exhausting to the outside.
PLASTIC OR OTHER COMBUSTIBLE
DUCTWORK CAN CAUSE A ~RE. PUNCTURED DUCTWORK CAN CAUSE A
FIRE
IF ~ COLLAPSES OR BECOMES OTHERWISE
D~mG
. Do not dry articles containing rubber, plastic, or
similar materials
shoes, galoshes, bath mats, rugs, bibs, baby pants,
plastic bags, etc.) as these materials may melt or
burn. Also, some rubber
can under certain circumstances produce fire by
spontaneous combustion.
Do not store items that may burn or melt
(such as clothing, paper material, plastics
or plastic containers, etc.) on top of the dryer during operation.
INSTALLATION.
RESTRIC~D ~
(such as padded bras, tennis
matetials,
USE OF
USE OR
when heated,
(continued next page)
3
Page 4
!
u
WORTANT SAmTY mSTRUCmONS
(continued)
. Garments labeled
(such as life jackets containing Kapok) must not be put in your dryer.
l’~
~)
A
substances (such as wax, paint, gasoline,
degreasers,
etc.) which may ignite or explode. Do not add these substances to the wash water. Do not use these substances around your washer dryer during operation.
Any article on which you have used a cleaning
solvent, or which contains flammable materials (such as cleaning cloths, mops, towels used in beauty salons, restaurants or barber shops, etc.) must not be placed in or near the dryer until traces of these flammable liquids or solids and their fumes have been removed. There are many highly flammable items used in homes such as: acetone, denatured alcohol, gasoline, kerosene, some household cleaners, some spot removers, turpentines, waxes, wax removers and products containing petroleum distillates.
Do not wash or dry articles
that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive
dry-cleaning solvents, kerosene,
“Dry
Away from
Heat”
antior
all
To
Minitize
Never reach into the dryer while the
drum is moving.
or adding clothes, wait until the drum has
completely stopped.
Do not dry fiberglass articles in
Skin irritation could result from the remaining glass particles that may be picked up by clothing during subsequent dryer uses.
4‘\
~ / Toavoid sucharesult, thegarment
h
\
f.
@
apptiance.
shipping or packing materials properly. Before discarding a dryer, or removing from service, remove the door of the dryer compartment.
the Possibility of
Before loading, unloading
The laundry process can reduce
the flame
manufacturer’s care instructions should be followed very carefully,
0
Close supervision is necessary
if this near children to play inside, with this appliance or any discarded
Dispose of
re%rdancy
apptiance
chtidren. Do
is used by or
discardd
not allow
I@ury
your
dryer.
of fabrics.
on,
or
appliances and
‘,)==-<”’
G
OPERATE THE DRYER WITHOUT THE FILTER IN PLACE.
Keep the area around and underneath your
appliances free from the accumulation of combustible materials,
chemicals, etc.
The interior of the machine and the exhaust
duct connection inside the dryer should be cleaned periodically by a
Clean
to prevent the dryer or in the room.
the lint filter before each load
lint
accumulation inside
DO NOT
L~T
such as lint, paper, rags,
qualtiled
individual.
. Keep all laundry aids (such
as detergents, bleaches, softeners, etc.) out of the reach of children,
w
n
container labels to avoid personal injury.
Keep the floor around your appliances
and dry to reduce the possibility of slipping.
maintenance or cleaning (except the removal and cleaning of the lint filter).
*
Do not tamper with the controls.
cabinet. Observe all warnings on
To minimize
shock,
power supply before attempting any
unplug this appliance from the
NOTE:
knob to an 0~ position does NOT disconnect the appliance from the power supply.
preferably in a locked
the
possibility of electric
Turning the Cycle Selector
fabric
clean
4
Page 5
s
Do
not operate this appliance if it is damaged,
ma~unctionkg,
missing or
partially disassembled, or has
broken
parts, including a damaged
cord or plug.
c
Never climb on or stand on the dryer
o
If yours is a gas dryer, it is equipped with an
automatic a pilot light.
WI~
your hand in automatic ignition may turn on.
eleetric
ignition and does not have
DO NOT
A~EMPT
A MATCH. Burns may result from having
the
vicinity of the burner when the
TO
top.
LIG~
Dryer-applied Fabric Softeners or
Anti-s@tic
You may wish to fabrics or reduce the static electricity in them.
We recommend you use either a fabric softener in the wash cycle, according to the manufacturer’s instructions for those products, or try a dryer-added product for which the manufacturer gives written assurance on the package that their product can be safely used in your dryer.
Service or performance problems caused by the use of these products are the responsibility of the manufacturers of those products and are not covered under the warranty of this appliance.
Conditioners
soften
your laundered
SAW T~SE ~STRUCTIONS
ENERGY-SAVING
Sort clothes by weight so you won’t have to run an extra cycle for
one or two heavier, slower-drying items.
Do not overload your dryer. For efficient drying, clothes need
to tumble freely.
Use Automatic Cycles whenever possible to help prevent overdying
and to save energy.
Remove garments promptly at the end of the drying cycle and place
on hangers.
Dry your clothes in consecutive loads. Using a “warm” dryer
will save energy.
Clean the dryer lint filter each time you dry.
Clean the dryer exhaust
exhaust can lengthen drying time.
ducting
at least once a year. A partially clogged
TWS
5
Page 6
HOW TO
WARNING—TO reduce the risk of fire, electric shock, or injury to persons when using your appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
DLB3900S and DLL3980S/DLB3800S and DLL3880S
DLB3600S and DLL3680S
OPEMTE
Features and appearances may vary slightly
YOUR DRYER
DLB3400S and DLL3480S
6
Page 7
Check the Lint Filter
Clean the lint filter each time the dryer is used. Always be sure the lint filter is in place. Don’t use the dryer without it. See Care and Cleaning section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if clothes are
sorted correctly for washing, they’re sorted correctly for drying. See the How to Sort the Clothes section. If you do mix various types of fabrics in your load, set the controls for the lighter-weight fabrics and remove when dry. Reset controls for the remaining heavier fabrics.
Set
the
COntrOls
Controls and features will vary from model to model
See the
Suggesti
@
Drying Selections.
Fabric and Drying Selections guide.
Select the proper heat for your load.
Should be used with cycles indicated
Automatic
DvinE Seiec~ons Regular cycle Knits Cycles
Cottons High Heat
Perrn.
Press
Medium Heat Fluff
No Heat
Knits~elicates
Low Heat
I
*Fluff-No Heat option can be used with an automatic cycle, but for
best performance it is recommended to be used with a timed cycle.
Automatic
I I
t
Perm.
Press and Timed
,
Cycles
I
I
NOTE: Drying times will vary according to the type of heat used (electric, natural gas or
LP gas),
size of load, types of fabrics, wetness of clothes,
and condition of exhaust ducts.
Press Guard feature.
Turn the Press Guard cycle indicator to YES and the Cycle Selector knob to Optional Press Guard. This feature will minimize wrinkles set in the clothes. The Press Guard feature provides approximately one hour of no-heat tumbling after the clothes are dry.
Use your Signal to remind you to remove clothes. See Signal section.
Cycle Selector.
Turn the Cycle Selector to the desired cycle setting.
I
The selector may be turned in either direction.
Signal.
Set this signal, if desired, to remind you to remove clothes from the dryer when the cycle
I
ends. See the Signal section.
Start Knob.
Turn the Start knob to start the dryer. (Opening the door during operation stops the dryer. To restart,
close
the door and turn the Start knob.)
7
Page 8
OPEMTmG ~STRUCTIONS
(continued)
signal.
The signal control can be set anywhere between OFF and LOUD, depending on the desired sound
level.
cycle to remind you to remove the clothes. To stop the signal while sounding, turn the signal
control to OFF or advance the Cycle Selector to OFF. The signal should always be used when drying
polyester knits or permanent press items which should be removed as soon as the dryer stops to help prevent setting of wrinkles.
Operates with any cycle. (on models so equipped)
The
signal
will sound just before the end of the
.utor.@w
n
.,”,
D“”
f%
.\
.0
.0
Polyester Knits & Permanent Press Drying Tips
DO NOT OVERLOAD— REMOVE CLOTHES PLACE ON HANGERS—
Garments being dried or
dewrinkled should tumble freely.
The Difference Between Auto Regular and Timed Regular Drying
Auto Regular
When using the Auto Regular Cycles, the dryer When using the Timed Cycles, you select the number continually senses the temperature of the air in the of minutes you wish the dryer to run and it turns off at dryer drum. Wet laundry keeps the air cool. When the end of this time period.
laundry is dry enough (and the drum air warm enough) the heat turns off. When the air cools, the heat turns back on. This off and on cycling may happen a number of times (depending on the fabric,
load size and Cycle Selector setting). The Cycle Selector advances (when the heat is automatically turns off the dryer.
PROMPTLY—To help prevent Permanent press and polyester wrinkling, remove clothes from knit garments look best if placed the dryer promptly at the end of the drying cycles.
offl
until it
Timed Regular
on hangers after drying.
(on models
so
equipped)
Drying Selections Guide for the Automatic Cycles
Set to AUTO REGULAR
wdnkl.
9-
For most normal loads.
/
Set toward More Dry
/
For loads that include heavy-
weight fabrics.
If you desire to remove more
moisture from your normal load.
9,
8
(on models so equipped—appearance may
Set toward Less Dry
m
70
mi”titi
For light weight fabric loads.
c
If you desire to remove less
moisture from the load.
Vary)
Page 9
Sort by Surface Texture
HOW TO SORT CLOTHES
.
Separate chenille—give up lint.
Sort by Fabric
Sort by Color
Separate I
t
m
Lint o
m
~
Producers
N
mm
~
~
Whites n
m
m
m
from
~m Collectors
R
m
.
Lint a
LINT PRODUCERS—such as terry toweling and
.,
LINT COLLECTORS—such as man-made fibers and napped fabrics like velveteen and corduroy—attract lint. These must be dried separately.
nfrommrommfromm
construction together whenever possible.
Sort by Weight
Separate
HOW TO LOAD THE CLOTHES
Don’t overload your dryer. Crowded loads don’t dry efficiently and clothes may be unnecessarily wrinkled. Loads should look like this:
Cottons & Linens
Drum with
For information on tumble drying extra large items and different fabrics and loads, see the Suggested Fabrics and Drying Selections guide.
th
Permanent Press Load
9
Page 10
SUGGESTED
FABNC
AND DRYING SELECTIONS
Cycle Suggested
Automatic Regular
For Clothes
Cottons and linens
Down-filled garments, if machine
Loa~abrics
such as:
washing and drying is recommended
Automatic Permanent Press & Knits
Delicates
Timed
Permanent press fabrics with cotton
Synthetics
Silks and wools
Rayon and acetate
Pillows*
Blankets**
Extra large items***
The terms High, Medium and Low Heat are those usually found on fabric care labels. For best results,
follow your specific fabric care label.
Special Instructions
Refer to garment manufacturer’s care labels for more information.
*Pillows
Check ticking for holes or weak seams where feathers or filling could escape. DRY ONLY ONE PILLOW AT A TIME. Set dryer for maximum time. Stop dryer occasionally and shake pillow to redistribute filling for more even drying. Check pillow at end of drying time—if not completely dry, return pillow to dryer and reset for more drying time. Feather pillows dry very slowly and must be dried completely to prevent mildew. DO NOT tumble dry pillows containing kapok.
Drying Selection
High Heat
Medium Heat
Low Heat
High Heat
Medium Heat
**Blankets
***Extra Large Items—
Queen or King size
sheets; Blankets or Spreads; Mattress
Covers~ads
10
Put 2 or 4 dry towels into the dryer; tumble dry for 5 minutes. Set timer for 20-25 minutes. DO NOT set control for more than 25 minutes. DRY ONLY ONE BLANKET AT A TIME. Remove blanket at the end of the cycle and block the blanket back to its original shape. Allow to dry thoroughly before storing.
First setting—20 minutes; check and redistribute load. Then set timer for
15 minutes; check load again. Reset timer at 5 minute intervals, checking after each 5 minutes to make sure that the articles do not fill the dryer drum: many large articles, when wet, have ample room in the dryer, but as they dry and fluff up, they may not have room to tumble. CAUTION: If large items do not have room to tumble, the air flow may be blocked, which could result in scorching your valuable items. NOTE: Mattress covers/pads should be dried
alone.
Page 11
CAm Am
User Maintenance Instructions CAUTION: If yours is an electric dryer, before you have it
connected in your new residence, be sure your licensed electrician confirms that the supply voltage matches the voltage specified on the rating plate.
CLEANING
Dryer Exterior
Wipe off any spills or washing Dryer control panel and finishes Apply these pre-treatment products
compounds. Wipe or dust with a
damp cloth. Try not to strike the
surface with sharp objects.
may be damaged by some laundry away from the dryer. The fabric
pre-treatment soil and stain may then be washed and dried
remover products if such products are sprayed on or have direct caused by contact with the dryer. is not covered by your warranty.
normally. Damage to your dryer
pre-treatment products
Dryer Drum
The porcelain enamel drum is rust-resistant and requires no special care.
Dryer Exhaust Dryer Storage
Inspect and clean the dryer To store your dryer for a exhaust a year.
ducting
at least once short period of time, disconnect
Lint Filter
Before every dryer
use, clean the lint
filter. Put your moistened fingers at the corner of the filter and wipe all the way across to the other comer.
Lint Filter
Periodically,
remove the lint
filter and insert the suction hose from your
vacuum cleaner into the opening.
Air Circulation Interior Light
the power supply and clean the lint filter.
\
(on models so equipped)
Do not obstruct the flow of combustion and BEFORE REPLACING ventilating air.
THE LIGHT BULB. BE SURE TO UNPLUG THE DRYER POWER CORD. Unscrew the bulb located inside at the top front center of the dryer and replace it with the same type 10 watt bulb.
-
11
Page 12
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
DRYER WON’T
CLOTHES
TA~
LONG TO DRY
ST~T
TOO
POSSIBLE CAUSE
Dryer unplugged. Make sure power cord is plugged in.
No power to dryer. Check fuses and circuit breakers to make sure dryer is
getting current. Most electric dryers use two.
Controls improperly set. Make sure controls are set and the Start knob is turned
to START. Opening the door during operation stops the dryer. To restart, close the door and turn Start knob to START.
Dryer door is open. Close door securely—dryer will not run with door open.
*
Circuit is overloaded. Do not operate other appliances on the same electrical
outlet or circuit while the dryer is operating.
Controls improperly set, Check
dl
controls to make sure they are correctly
set for the load you want to dry. See the How to Operate Your Dryer section.
Clogged lint filter. Remove and clean filter before every load. Periodically clean
area under lint filter with vacuum cleaner. See the Care and Cleaning section.
Improper
ducting.
Make sure dryer is
ducted
in accordance with the
Instigation Instructions.
Obstruction in exhaust
ducting.
Make sure
ducting
is clean and free of obstruction; make sure damper in outside wall cap operates easily. If flexible
ducting
is used, be sure it is not kinked and is properly installed according to
the Installation Instructions.
Blown fuses or tripped circuit breakers. Check household fuses or circuit
breakers. Most electric dryers use two. It is possible for one to be blown or tripped and the dryer will still tumble without heat.
Improper sorting. Do not mix heavy, hard-to dry items with lightweight articles.
Large loads of moisture-holding fabrics, such as beach towels, take a long
time to remove moisture.
Too many items in dryer. Dry only one washer load at a
t’ime.
Do not
combine loads.
s
Too few items in dryer. If drying only one article, add two more similar articles,
even if dry, to insure proper tumbling.
SHRIN~GE,
12
GENERAL
Some fabrics will shrink whether machine washed and tumble dried or washed
by hand and drip dried; others maybe safely washed but will shrink in a dryer.
Follow garment manufacturers’ care labels exactly.
If in doubt, do not machine
wash or tumble dry.
Page 13
PROBLEM
SHR~~GE,
~ITS
POSSIBLE CAUSE
Relaxation shrinkage
can
occur in knit fabrics that have been improperly
stretched and elongated by the manufacturer. When this occurs, garment may
be
pressed
Progressive or delayed shrinkage is caused when starch or sizing
fabrics) is gradually removed by laundering. Maybe noticed in older garments that have been laundered many times without previous shrinkage. Treat relaxation shrinkage above.
Shrinkage caused by overheating
been heat-shaped. When washing, drying or ironing temperatures exceed the temperatures used to shape set, shrinkage may occur. This cannot be corrected, but it can be prevented by washing in cold or warm water; drying on low heat.
back into shape after each wash and dry cycle.
occurs in certain knit fabrics that have
(in
some
as
for
WRIN~ING
IN PERMANENT PRESS
AND “NO-IRON” ITEMS
Leaving clothes in dryer after tumbling stops.
Remove
clothes
prompfly
and
hang them immediately.
Too many items in dryer. Dry only one washer load at a time. Do not
combine loads.
. Too few items in dryer. If drying only one article, add two or more similar
articles, even if dry, to insure proper tumbling.
Improper loads. Avoid laundering heavy permanent press items, such as work
clothes, with lighter permanent press items, such as shirts or blouses. Do not wash or dry permanent press with regular laundry.
Too many clothes in washer. Items must have room to move freely. Permanent
press loads should always be smaller than regular loads.,
.no
more than
medium loads.
Use of incorrect wash and dry cycles. If available,
cycle which provides a cool-down rinse to minimize
use
Permanent Press wash
wri~ling.
Also, if
available, use Permanent Press drying cycle.
Incorrect water level. Use large water level for medium
lo’ad;
medium level
or half full for small load.
Washing repeatedly in too hot water. Wash in cool or warm water with
plenty of detergent.
Failure to use fabric softener. Proper use of fabric softener will
minimize wrinkling.
(continued next page)
13
Page 14
PROBLEM
T~
PROBLEM SOLVER
(continued)
I
POSSIBLE CAUSE
TO REMOVE WRINKLES ON
DR~RS
PERMANENT PRESS SETTING
WITH A
TO REMOVE WRINKLES:
Retumble
Rerinse
I
If unsuccessful, retumble on normal temperature for 10—12 minutes
and hang immediately.
~on carefully.
Send to Dry Cleaners for pressing.
Some wrinUes may remain which cannot be removed. *
*
NOTE: If
clothes still come out permanent press synthetic/cotton blends, the cotton portion of the fabric can
evenmally
which is treated for permanent press, a loss or decrease of permanent press performance will result.
If you need more help.. call, toll free: GE Answer
Center@
800.626.2000 consumer information service
on Permanent Press setting.
and dry on Permanent Press setting,
YOU
follow good laundry procedures and permanent press
wrintied, the finish may not be good quality. Also, in
wear away leaving only the synthetic. Since its the cotton portion
14
Page 15
Wdll
With the purchase
need information or assistance, we’ll be there. All you have to do is call—toll-free!
Be There
ofyour
new
Hotpoint
appliance, receive the assurance that
ifyou
ever
lmHome
Repair Service
80MEXARES(80M32-2737)
Our consumer service professional will provide expert repair service on your
Hotpoint
Consumer Service company-operated locations offer you service today or tomorrow, or at your convenience
2:00 p.m. Saturdays). Our factory-trained technicians know your appliance
inside and out—so most repairs can be handled in just one visit..
appliance, scheduled at a time that’s convenient for you. Many
(7:00 a.m. to 7:00 p.m. weekdays, 9:00 a.m.
GEAnswer Centep
Whatever your question about any Center” information service is available to help. Your call–and your question–will be answered promptly and courteously. And you can call any time. GE Answer
Center@ service is open 24 hours a day, 7 days a week.
hrCustomers
Upon request, we will provide Braille controls for a variety of
Hotpoint
brochure to assist in planning a barrier-free kitchen for persons with limited mobility. To obtain
these items, free of charge, call
800.626.2000.
Hotpoint
major appliance, GE Answer
With Special Needs...
appliances, and a
Consumers with impaired hearing or speech who have access to a call information or service.
C,E
t.o
TDD or a conventional teletypewriter may
800-TDD-GEAC (800-833-4322)
t.o
request
Service Contracts
80@62&2224
You can have the secure feeling that GE Consumer Service will still be there after your your warranty is still in effect and a multiple-year contract, you’re assured of future service at today’s prices.
Parts
80&62&2002
Individu&
have needed parts or accessories sent directly to their
home. Our parts system provides access to over 47,000 Other servicing Genuine Renewal Parts... and all are fully warranted.
VISA, MasterCard
Hotpoint
product warranty expires. Purchase a
you’ll receive a substantial discount. With
andAccessories
qualified
to service their own appliances
and Discover cards are accepted.
can
CTE
contract while
User maintenance instructions contained in this
cover procedures intended to be service personnel. Caution must be exercised, since
improper servicing may cause unsafe operation.
generwy
perfomed
shotdd be referred to
by
boo~et
anywer.
qutified
Page 16
YOUR HOTPOINT AUTOMATIC
CLOTHES DRYER
WARRANTY
Staple sales slip or cancelled check
here. Proof of original purchase date
is needed to obtain service
II
under
warrantv.
.
WHAT IS COVERED
WHAT IS NOT COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original purchase, we will provide, free of charge, parts and service labor in
your home to repair or replace
pan
of
fhe
any
because of a manufacturing defect.
Service trips to your home to teach
you how to use the product.
Read your Use and Care material.
If you then have any questions
operatina
about contact your Affairs office at the address below, or call, toll free:
GE Answer
800.626.2000
consumer information
c
Improper installation.
If you have an installation problem, contact your dealer or installer. You are responsible for providing adequate electrical, exhausting and other connecting facilities.
dryer that fails
the product, please
de>ler
or our Consumer
Cente@
sewice
This warranty is extended to the original purchaser and any succeeding owner for products purchased for ordinary home use in the 48 mainland states, Hawaii and Washington, warranty is the same except that it is LIMITED because you must pay
to ship the product to the service
shop or for the
travel costs to your home. All warranty service will be
provided by our Factory Service Centers or by our authorized Customer normal working hours.
Should your appliance need service, during warranty period or beyond, call 800-GE-CARES (800-432-2737).
Replacement of house fuses or
resetting of circuit breakers.
Failure of the product if it is used
for other than its intended purpose or used commercially.
Damage to product caused by
accident, fire, floods or acts of God.
WARRANTOR IS NOT
RESPONSIBLE FOR
CONSEQUENTIAL DAMAGES.
Car@
D.C.
In Alaska the
sewice technician’s
servicers during
I
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
This book is printed on recycled paper.
Part
No.
175
D1807P051
Pub No. 39-9329
8-94
CG
Warrantor: General Electric Company
va~
from state to state.
DLB3900S DLL3980S DLB3800S DLL3880S DLB3600S DLL3680S DLB3400S DLL3480S
Printed in Louisville,
I
Loading...