Page 1
GE
Lighting Solutions
Area Lighting
Decashield™ 1000 (DSA)
imagination at work
Page 2
Product Features
Designed for superior photometric performance and architectural appeal, GE Outdoor Area Sightlighters provide
broad application flexibility. From parking lots to downtown areas, hospitals to shopping malls, business complexes to
residential neighborhoods, these fixtures will satisfy your large area lighting needs, while complementing your
aesthetic desires.
Applications
• High wattage site lighting including parking areas,
roadways, automobile lots, tennis courts, malls and
commercial complexes
Housing
• Precision engineered aluminum housing featuring
die-cast ends and die-cast door frame
Finish
• Polyester powder paint finish in dark bronze, black,
gray, white or aluminum
Rating
• 1598 Listed Suitable for Wet Locations
/
Mounting
• Decorative Mounting Arm (4 in. [103mm], 8 in.
[203mm] or 12 in. [305mm]) (Drilling templates are the
same for the Decashield™ 400 and Dimension™
luminaires.)
Unique Features
• No-tool access stainless steel latch design
• Broken Glass Shutdown Circuit
• Heat and impact resistant tempered flat glass lens
• Removable ballast tray—standard
• Utilizes standard 1000 watt lamps
• Available with Type I, Type II, Type III or Forward
Throw
• Enclosed and gasketed housing
• Mogul base socket – E39 standard
• Magnapack packaging available
Reflectors
• All reflectors are field rotatable (90° increments)
Page 3
Ordering Number Logic
Decashield™ 1000 (DSA)
D S A G
_ _ _ - _ _ - _ - _ - _ - _ - _ - _ _ _ - _ _ - _ - _
PROD. ID
DSA =
Decashield
1000 Luminaire
with Arm
Mounting
WATTAGE
75 = 750
01 = 1000
LIGHT
SOURCE
S = HPS
M = MH
P = Pulse
MH
Standard:
Mogul base
lamp not
included.
BALLAST
VOLTAGE COLOR
60Hz
0 = 120/208/240/
277 Multivolt
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
F = 120X347
T = 220
50Hz
6 = 220
R = 230
Y = 240
NOTE:
120 X 347
connected for
120V
TYPE
SELECTION
See Ballast and
Photometric
Selection Table
A = Autoreg
H = HPF
P = CWI with
Reactor or
Lag
Grounded
Socket Shell
PE
FUNCTION
1 = None
2 = PE Receptacle
4 = PE Receptacle
and Shorting
Cap
NOTE: Receptacle
connected same
voltage as unit.
LENS
TYPE
G = Flat Glass
IES
DISTRIBUTION
TYPE
See Ballast and
Photometric
Selection Table
MC1 =
Medium Cutoff
Type I *
SC2 =
Short Cutoff
Type II *
MC2 =
Medium Cutoff
Type II *
MC3 =
Medium Cutoff
Type III *
FWT =
Forward
Throw *
* = Previously
IESNA Full Cutoff
Optics
AL = Aluminum
BL = Black
DB = Dark Bronze
(Standard)
CG = Charcoal
Gray
WH= White
MOUNTING
ARM LENGTH
1 = 4 in.(102mm)
for Singles
Two at 180
2 = 12 in.
(305mm) for
Two at 90o
Tri-Fixture
Poles
Quad-Fixture
Poles
3 = 8 in. (203mm)
for Singles
Two at 180°
4 = 4 in. (102mm)
for Round
Pole
5 = 12 in.
(305mm) for
Round Pole
6 = 8 in. (203mm)
for round Pole
R = No arm.
Housing
drilled with
diagonal hole
pattern
Ballast and Photometric Selection Table
All light sources are clear unless otherwise indicated.
Ballast Type/Voltage
60Hz 50Hz
120, 208,
Light 240, 277, 347,
Wattage Source Multivolt 480 120X347 220 220 230 240 MC1 SC2 MC2 MC3 FWT
750 HPS N/A A,H A,H N/A N/A N/A N/A N/A N/A 178979 N/A 178985
1000 HPS A A A N/A A A A N/A 178980 178988 178993 178986
1000 MH A, P A A A A A A N/A 178981 N/A N/A 178982
1000 (BT37) MH A, P A A A A A A 178978 N/A N/A N/A 178987
1000 PMH A A A N/A N/A N/A N/A N/A 178981 N/A N/A 178982
1000 (BT37) PMH A A A N/A N/A N/A N/A 178978 N/A N/A N/A 178987
NOTE: N/A = Not available
IES Distribution Type
Photometric Curve Number 35-
OPTIONS
B = Time Delay
Automatically
o
Switched
Quartz
F = Fusing (Not
available
with multivolt or
120X347V)
J = Line Surge
Protector,
Expulsion Type
(UL not available)
Page 4
Product Dimensions
2.375 in. (60 mm)
6.500 in.
(165 mm)
4.000 in.
(102 mm)
2.250 in. (57 mm)
SQUARE POLE MOUNTING: STANDARD
(choices 1, 2, 3 from Logic Table)
.312 in. (6 mm) DIA
Hole
5.250 in.
(133 mm)
MIN
1.812 in.
(46 mm)
1.250 in. DIA
(32 mm DIA)
HOLE
.438 in. (11 mm) DIA
Holes
2.196 in. (56 mm)
4.392 in.
(112 mm)
30.000 in. R (762 mm)
31.000 in. (787 mm)
3.5 to 4.5-inch (89 to 114mm) OD
(choices 4, 5, 6 from Logic Table)
5.250 in.
(133 mm)
MIN
.750 in. DIA
(19 mm DIA)
HOLE
11.688 in.
(297 mm)
24.000 in.
(610 mm)
ROUND POLE MOUNTING
round pole mounting arm
.438 in. (11 mm) DIA
Holes
2.719 in. (69 mm)
5.438 in.
(138 mm)
.656 in. (17 mm)
1.312 in. (33 mm)
DRILLING TEMPLATE DRILLING TEMPLATE
DRILLING TEMPLATE
FOR ROUND POLES
• Approximate Net Weight: 60-70 lbs (27-32 kgs)
• Suggested Mounting Height: 30-50 ft. (9-15 M)
• Effective Projected Area:
No Mounting Arm 2.6 sq. ft. max. (0.24sq. M max.)
Single with 4 in. (102mm) Mounting Arm 3.0 sq. ft. max. (029 sq. M max.)
Double with 4 in. (102mm) Mounting Arm at 180° 6.0 sq. ft. max. (0.56 sq. M max.)
Double with 4 in. (102mm) Mounting Arm at 90° 4.5 sq. ft . max. (0.42 sq. M max.)
DATA
Single with 12 in. (305mm) Mounting Arm 3.2 sq. ft. max. (0.30 sq. M max.)
Double with 12 in. (305mm) Mounting Arm at 180° 6.4 sq. ft. max. (0.59 sq. M max.)
Triple with 12 in. (305mm) Mounting Arm at 90° 8.0 sq. ft. max. (0.74 sq. M max.)
Quad with 12 in. (305mm) Mounting Arm at 90° 9.3 sq. ft. max. (0.86 sq. M max.)
Double with 12 in. (305mm) Mounting Arm at 90° 4.8 sq. ft. max. (0.45 sq. M max.)
NOTE: The wind loading of Decashield Luminaires, when mounted to poles in multiples radially about the axis of the pole, do not necessarily have the EPA of
a single luminaire multiplied by the number of luminaires.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
OLP-2943 (Rev. 06/19/12)
Loading...