GE DGE Data Sheet
DGE DURAGLOW ® 400 LUMINAIRE
NUVATION ™ Electronic Ballast
High Bay, Open – Optical Sliding Disconnect Series
APPLICATIONS
• For over 20 ft. (6 meter) applications. Assembly, maintenance or storage areas,
hangers, recreation centers, and other high bay applications.
SPECIFICATION FEATURES:
• 1598 Listed
Suitable for Damp Location
• Open, ventilated optical assembly
• Unique optical sliding disconnect
• 55° C ambient, standard
• ALGLAS ® nish on faceted reector.
• Nuvation ™ electronic ballast:
• Dimming Option — dims lamp to 50% of rated
lamp wattage.
• Two piece heavy-duty die cast aluminum housing
• Integral optical mounting design for GELS
“Sliding Disconnect”
• Attractive round ballast housing design with
white polyester paint nish
ORDERING NUMBER LOGIC
DGE
PRODUCT
IDENT
XXX
DGE =
Duraglow
400
Luminaire
Disconnect
optical
with
NnVation
electronic
ballast
PHOTOMETRIC SELECTION TABLE
V7 OPTICAL - Open & Ventilated 17 in. Reector
Light Spacing Socket Photometric Optical Photometry
Wattage Source Criteria Position Curve Code Code
320, 350, 400
320, 350, 400
320, 350, 400
320, 350, 400
320, 350, 400
320, 350, 400
V2 OPTICAL - Open & Ventilated 22 in. Reector
Light Spacing Socket Photometric Optical Photometry
Wattage Source Criteria Position Curve Code Code
400 MH,P 0.7 7 174978 V2 ES
400 MH,P 0.9 11 179165 V2 EX
W
COLOR
X
W = White
Polyester
Powder
40
WATTAGE
XX
25 = 250
32 = 320
35 = 350
40 = 400
MH,P 1.1 11 174980 V7 EX
MH,P 1.3 9 174981 V7 EU
MH,P 1.6 5 177098 V7 EQ
MH(Coated),P 1.2 11 175933 V7 EX
MH(Coated),P 1.5 9 175320 V7 EU
MH(Coated),P 1.9 5 175930 V7 EQ
N
LIGHT
SOURCE
X
N =
Ballast will
operate
Pulse
Start or
Ceramic
Metal
Halide
Lamps
Note:
Lamp is
vertical
base up.
Lamp is
not
included.
G
VOLTAGE
X
G = 208-277
Discrete
Voltages
must be
specied
when
ordering
cord & plug
assemblies:
2 = 208
3 = 240
4 = 277
E
BALLAST
TYPE
X
E=
Electronic
C=
Dimming
V7
OPTICAL
CODE
XX
V7 =
Open and
ventilated
17-in.
Reector
V2 =
Open and
ventilated
22-in.
Reector
Note: Do not
use open
opticals
with lamps
specied
for use in
enclosed
opticals only
EX
PHOTOMETRY
CODE
XX
XX = Select
Code
Below
• Integral air gap between optical
mounting and ballast for optimum
temperature control and thermal
management
• Slide-on mounting box adaptor with
3/4-in pendant and thru feed capability
for ease of installation and mounting.
• External wattage selection port for
selection of 250, 320, 350 & 400 watt
choices.
• Safety chain provisions
• Mogul base socket – E39 standard
• Shipped as components: Ballast, Optical
Magnapack available for ballast.
11
MOUNTING
CODE
XX
11= Pendant Slide on Box
15 = Prewire with Loop, Cord and Plug part “Power
Hook”. (Order Receptacle/Hook Box separately)
Discrete Voltages must be specied when ordering
cord & plug assemblies below:
31 = Prewired with Hook, 3 ft. (0.9 meters) #16/3 Cord
and NEMA PLUG
33 = Prewired with Loop, 3 ft. (0.9 meters) #16/3 Cord
and NEMA PLUG (Order Locking Receptacle
Separately, if required)
MODULAR PREWIRE
41 = ACS with 3 ft (.9 meter) cord & Hook
69 = ACS with 6 ft (1.8 meter) cord & Hook
43 = ACS with 3 ft (.9 meter) cord & Loop
70 = ACS with 6 ft (1.8 meter) cord & Loop
PLUG-N-GO
51 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Hook
71 = Plug-N-Go with 6 ft. (1.8meter) Cord & Hook
53 = Plug-N-Go with 3 ft. (0.9 meter) Cord & Loop
72 = Plug-N-Go with 6 ft. (1.8 meter) Cord & Loop
Note: ACS = Flex 3+
Plug-N-Go = FSC Series
Exclusionary base socket is available for use with Metal Halide lamps in open
xtures to comply with NEC 2005 regulations (GELS “S” Option).
Customer should consult or review local electrical codes for compliance.
All Electronic devices are susceptible to transient voltage spikes. For facilities
where the lighting circuits are not protected from transient voltage spikes
a (TVSS) Transient Voltage Surge Suppression system is recommended.
To protect the NuVation ballast a T VS protection system must be able to
suppress a 3000V ring wave as described in ANSI/IEEE C62.41 B1.
X
OPTIONS
X
Q = Automatic
switched quartz
S = Exclusionary
mogul base socket for
MH open xtures
I-12/2008
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
DGE DURAGLOW
NUVATION
® 400 LUMINAIRE
™
Electronic Ballast
High Bay, Open – Optical Sliding Disconnect Series
DIMENSIONS
When optical assembly contains a quartz socket an additional
1.125 inches (29mm) must be added to the overall height due to
double stack disconnect.
NOTES
See explanation on “Optical Flexibility” Page I-4. See References.
REFERENCES
See Page I-104 for start of Accessories.
See Page I-117 for Component Ordering Logic.
See Page I-129 for Explanation of Options and Other Terms Used.
3/4 in. NPSC
Thread
FIXTURE DIMENSIONS
15.00 in. Dia.
(381mm)
Fixture Height
V7 - 30.00 in.
(762mm)
V2 - 30.187 in.
(767mm)
DATA
Approximate Net Weight lbs kgs
Ballast and Optical 16 - 31 7 - 14
BALLAST DATA
* 13% Improvement in Pulse Start Metal Halide lamp lumen maintenance vs. magnetic.
* 6% improvement in Ceramic Metal Halide lamp lumen maintenance vs. magnetic.
* 50% lower ballast losses than typical CWA magnetic HID ballast.
* Lamp wattage regulation of +/-2% change for +/-10% change in line voltage.
* Ballast is rated for use with voltage range between 208 and 277 with +/-10% line voltage tolerance, 50/60 Hz, and will
automatically sense voltage within specied range.
* Ballast input current total harmonic distortion (THD) of less than 15% when operated at nominal line voltage.
* Ballast is thermally protected to shut o when operating temperatures are
above unacceptable levels for the ballast safe and reliable operation.
* Ballast has an end-of-lamp-life detection and shutdown circuit.
* The ballast shall have a minimum starting temperature of –20 degrees F
and maximum operating ambient of 55 degrees C..
* Ballast is capable of operating pulse start metal halide or ceramic metal halide lamp types.
* Five-Year Fixture Failure Warranty.
* Meets requirements of FCC rules and regulations, Title 47 CFR part 18 for nonconsumer equipment.
Dimming Ballast
* The ballast is supplied with a violet (+) and gray (-) wire for dimming control connections.
* Ballast dims to fty percent of rated lamp wattage.
* Dimming voltage is 0-10V where 10V is high wattage and 0 is fty percent of rated lamp wattage.
* Ballast operates the lamp at high wattage for 15 minutes at start up.
* Ballast operates lamp at high wattage for fteen minutes after operating in dim mode for twenty-four hours.
V7 - 17.13 in. Dia. (434mm)
V2 - 22.80 in. Dia. (579mm)
INPUT WATTAGE TABLE
Lamp Line Input
Wattage Voltage Watts
400 277 428
400 240 432
400 208 435
350 277 377
350 240 380
350 208 383
320 277 346
320 240 347
320 208 349
250 277 276
250 240 272
250 208 271
® Registered Trademark of General Electric Company
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
TM
Trademark of General Electric Company
Data subject to change without notice
2008/I-13
Loading...