GE DDG6580G, DDE6500G Use and Care Manual

Page 1
Contents
Dryer
Appliance Registration Automatic Drying
(lare and Cleaning (;onsurner Services
Controls Setting Guide
Dryer Exhaust Energy-Saving Tips
Knits Drying Lint Filter
Loading Model and Serial Numbers
Operating Instructions
~-ips
Models DDE6500G
DDG6580G
13 15
6, 7
13
5-7, 11
9, 13
4,
Perm.
2
5
9
g 2
4
Press Drying Tips 5-7, 11, 12
Problem Solver Safety Instructions
Sorting Storing Dryer
Timed Drying User Maintenance Instructions 13
Warranty Back Cover
3,4
4,8
GEAmwer Center@
80~62E2000
13
5
GEAppiances
Page 2
Help us help you...
If You Need Service
Before using your dryer, read this book carefully.
It is intended to help you operate and
maintiin your new dryer properly.
Keep
it
handy for answers to your
questions. If you don’t understand something
or need more help, write (include your phone number):
Consumer Affairs GE Appliances Appliance Park Louisville,
KY40225
If you received a damaged dryer...
Immediately contact the dealer (or builder) that sold you the dryer.
Save time and money.
Before you request service...
check the Problem Solver on pages 10-12. It lists causes of
minor operating problems that
you can correct yourself.
To obtain a Spanish language version of this book, call GE Answer
800.626.2000 consumer information service.
Para
obtener la
espafiol
name a GE Answer
servicio para el te16fono
FOR YOUR
[f
you smell gas:
1,
Open windows.
Center@
versi6n
de
este
manual,
Center?
de
informaci6n
consumidor,
800.626.2000.
SA~W
en
2. Don’t touch
electrical
switches$
3. Extinguish any
open
4,
Immediately call
flame.
your gas supplier.
To obtain service, see the Consumer Services page in the back of this book.
We’re proud of our service and want you to be pleased. If for some reason you are not happy with the
service you receive, here are three steps to follow for
FIRST, contact the people who serviced your appliance. Explain why you are not pleased. In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all the details-including your phone number—to:
Manager, Consumer Relations GE Appliances Appliance Park Louisville, Kentucky 40225
FINALLY, if your problem is still not resolved, write:
Major Appliance Consumer Action Panel 20 North Chicago, Illinois 60606
Wacker
firther
Drive
help.
Write down the model and serial numbers.
You’ll find them on a label on the front of the dryer behind the door.
These numbers are also on the Consumer Product Ownership Registration Card that came with your dryer. Before sending in this card, please write these numbers here:
*Don’t turn electric switches on or off because sparks may ignite the gas.
I
FORyoURsA=~
Do not store or use gasoline or other flammable vapors and
liquids in the vicinity
Model Number
Serial Number
Use these numbers in any correspondence or service calls concerning your dryer.
All drying instruction terms in this book conform to the Care Labeling Rule established by the Federal Trade Commission, January 1984.
of this or any other appliance.
2
Page 3
IMPORT~T S~ETY
INSTRUCTIONS
Read all instructions before
usi~
~PORTANT
SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances
known to the state to cause cancer, birth defects or other reproductive harm and requires businesses to warn customers of potential exposure to such substances.
Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or fuels. Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can be minimized further by properly venting the dryers to the outdoors.
WA~ING—To
reduce the risk of fire, electric shock, or injury to persons when using your
apptiance, fo~ow
basic
including the following:
Use this appliance only for its
intended purpose
this Use and Care Book.
This dryer must be properly
as described in
installed and located in accordance with the Installation Instructions before it is used.
you did not receive an Installation Instructions sheet with your dryer, you can obtain one by contacting the service location nearest you.
—Properly ground to conform with all governing codes and ordinances. Follow details in Installation Instructions.
—Locate where the temperature is above
50°F. (lO°C.)
for satisfactory operation of the dryer control system. Do not instill or store the dryer where it will be exposed to the weather.
–Connect to a properly rated, protected and sized power-supply circuit to avoid electrical overload.
—Exhausting to the outside is STRONGLY RECOMMENDED
LP
p~utions,
If
this appliance.
to prevent large amounts of moisture and lint from being blown into the room. Carefully follow the Exhausting Details in the Installation Instructions.
. When disconnecting this appliance pull by the plug rather than the cord to avoid damage to the cord or junction of cord and plug. Make sure that the cord is located so that it will not be stepped on, tripped over or otherwise subjected to damage or stress.
Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this Use and Care Book or in published
user-
repair instructions that you understand and have the skills to carry out.
To minimize the possibility of a fire
Do not use heat to dry articles containing rubber, plastic, or similar materials (such as padded bras, tennis shoes, galoshes, bath
mah,
bags, etc.) as these materials may melt or burn. Also, some rubber materials, when heated, can under certain circumstances produce fire by spontaneous combustion.
Garments labeled “Dry Away
From Heat” (such as life jackets containing Kapok) must not be put in your dryer.
c
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive (such as wax, paint, gasoline,
degreasers, solvenk,
may ignite or explode. Do not use or store such substances on/or around your washer and/or dryer during operation.
.
Any article on which you have used a cleaning solvent, or which contains flammable materials
hzard.
rugs, bibs, baby pants, plastic
substanc~
dry-cleaning
kerosene, etc.) which
3
(such as cleaning cloths, mops, towels used in beauty salons,
restaurants or barber shops, etc.) must not be placed in or near the dryer until all traces of these flammable liquids or solids and their fumes have been removed. There are many highly flammable items used in homes such as: acetone, denatured alcohol, gasoline, kerosene, some household cleaners, some spot removers, turpentines, waxes, wax removers and products containing petroleum distillates.
Clean the lint
filter
before each load to prevent lint accumulation inside the dryer or in the room. DO NOT OPERATE THE DRYER WITHOUT THE LINT FILTER IN PLACE.
Keep area around and underneath your appliance free from the accumulation of combustible materials, such as lint, paper, rags, chemicals, etc.
. Do not store items that may bum
or melt (such as clothing, paper material, plastics or plastic containers, etc. ) on top of the dryer during operation.
The interior of the machine and the exhaust duct connection inside the dryer should be cleaned periodically by a qualified individual.
Exhaust duct (see installation instructions). Use only metal duct inside dryer or for exhausting dryer to the
oubide.
To minimim the possibility of injury.
Q
Never reach into the dryer while the drum is moving. Before loading, unloading or adding clothes, wait until the drum has completely stopped.
Close supervision is necessary if this appliance is used by or children. Do not allow children to
-
nwr
Page 4
Impotint
Safety
l~tructio~
(continued)
play inside, on or with this
a~~liance
or
any
discarded appliance. Dispose of discarded
appbces
and shipping or packing materials properly. Before discarding a dryer, or removing from service, remove the door of the drying compartment.
Keep all laundry aids (such as detergen~, bleaches, fabric softeners, etc.) out of the reach of children, preferably in a locked cabinet. Observe all warnings on container labels to avoid personal injury.
s
Keep the floor around your appliances clean and dry to reduce the possibility of slipping.
Do not dry fiberglass articles in
your dryer. Skin irritation could result from the remaining glass particles that may be picked up
by clothing during subsequent dryer uses.
The laundry process can reduce
the flame retardancy of fabrics. To
avoid such a result, the garment
manufacturer’s care instructions should be followed very carefully.
Never
dryer top or door. .
Do not tamper with controls.
.
of electric shock, unplug this appliance from the power supply before attempting any maintenance or cleaning (except the removal and cleaning of the lint filter). NOTE: Turning the Cycle Selector knob to an OFF position does disconnect the appliance from the power supply.
Do not operate this appliance
if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.
equipped with an automatic electric ignition and does not have a pilot light. DO LIGHT WITH A may result from having your hand in the vicinity of the burner when the
c!imb
on or stind on the
To minimize the possibility
N~
If yours is a gas dryer, it is
N~
automati;
ATTEMPT
MA~H.
ignition may turn on.
~
Burns
Dryer-applied fabric softeners or
anti-stitic
conditioners
You may wish to soften your laundered fabrics or reduce the static electricity in them. We recommend you use either a fabric softener in the wash cycle, according to the manufacturer’s instructions for those
produch,
or try a dryer-added product for which the manufacturer gives written assurance on the package that their product can be safely used in your dryer.
Service
caused by the use of these products are the responsibility of the manufacturers of those products and are not covered under the warranty of this appliance.
SAn
or performance problems
THESE
INSTRUCTIONS
How to operate your dryer
WARNING-To reduce read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
had
Your Dryer Properly
c
Clean the lint filter each time the dryer is used. Always be sure lint filter is in place. Don’t use the dryer without it.
Good sorting for the dryer begins
at the washer. Generally, if clothes are sorted right for washing, they’re
the risk of fire, electric shock, or injury to persons,
sorted right for drying. See page 8
the
for sorting help. (If you do mix various types of fabrics in your load, set the controls for the lighter-weight fabrics and remove when dry. Reset controls for the remaining heavier fabrics.)
Set the Controls
See the Controls Setting Guide on pages 6 and 7.
4
Page 5
~
Fabri.Car.S.lectio*s
Push a button to select the proper heat for your load.
Should be used with cycles indicated
Automatic, Fabric Care Selections
Cottons High Heat
Perm Press Medium Heat
Knits/Delicates
Low
Heat
Fluff No Heat
~
Turn Cycle Selector to desired
Automatic
Regular Cycle
cycle setting. The selector may be turned in either direction.
Perm Press and
Knits Cycles
~
Press PUSH TO START button to start dryer. (Opening the door during operation stops the dryer. To
re-start, close the door and press
the START button. )
Timed Cycles
Polyester Knits &
Permanent
mess
drying tips
DO NOT
Garments being dried or
de-wrin~ed
REMOVE
PROM~LY—To help prevent
wrinkling, remove from the dryer promptly at the end of the drying cycles.
PLACE ON
Permanent Press and Polyester
Knit garments look best if placed on hangers after drying.
OVERLOAD—
should tumble freely.
CL~HES
HANGERS—
What is the difference between
~med
&
Automatic drying?
Timed Drying
When using the TIMED you select the number of minutes you wish the dryer to run and it turns off at the end of this time period.
Automatic Drying
When using the AUTOMATIC cycles, the
system
temperature of the air in the dryer drum. Wet laundry keeps this air cool. When laundry is dry (and the drum air warm enough) the heat turns off. When the air cools, the heat turns back on. This off and on cycling may happen a number of times (depending on the fabric, load size and Cycle Selector setting). The Cycle Selector advances (when the heat is until it automatically turns off dryer.
Automatic Dry Control
continually senses the
CYCLE,
enollgh
offl
Dryness he
selections guide for
automatic cycles
Set to
Middle Position
,,..
Aulo,matlc Reg, >l”r C“cle
For most normal loads.
Set
A,,tc,r,,,,
t!c neg.le, C“cl<,
For loads that include heavy-
weight
If you desire to remove more
moisture.
Set toward LESS DRY
A“tc>met$c Res,,,la. cycle
.+.:;+’
.:~...~
.{,.
!
/
r,,”
f@
toward
.<,.,
““y
fabrics.
...;3’
“,$
.“,,
“’
/
r.”
(@
*Y’
MORE DRY
,!s<
“.”
,,,
<
“.”
@
For lightweight fabric loads.
If you desire to remove less
moisture.
For very small loads.
for
(:ontrols
Setting Guide
5
-
Page 6
Controk
Setting Guide for different fabrics and loads
bad
Fabric Care/ Drying Selection*
Cycle
Cycle Setting
Cottons & Linens
Permanent Press, Treated Cottons, Blends with Cotton
Synthetics—Polyester, Nylon. Acrylic Knits and Woven Fabrics
Sturdy
Delicate
Silks and Wools, Blends including Silks and Wools
Rayon and Acetate Knits/Del
Down-filled garments, if machine washing and drying are recommended.
Baby Clothes—Sturdy: Diapers, Nightgowns, Shirts, Pads, Sheets, Receiving Blankets, Coveralls. See Special Instructions.
Baby Clothes—Delicate
Blankets—Wool, Part Wool, Cotton, Electric, Synthetic. below under “Extra-large
Curtains, Slipcovers, Draperies.
DO N~ MACHINE DRY FIBERGLASS.
Chenille Bedspreads, Robes. See below under “Extra-large
Rubber-coated Items, Laminated Fabrics, Vinyl, Plastics and
Articles with Plastic
Bathmats and Rugs
Extra-large Items—Queen or King Size Sheets, Blankets or Spreads, Sleeping Bags, Insulated Jackets or Suits, Mattress Covers (Pads), Quilted Bedspreads.
Sec
items:’
Items:’
Trim.
Cottons High Heat
Perm Press Medium
Perm
Press
Medium Heat
Knits/Delicatcs
Low Heat Knits/Del
Low Heat
Low Heat Cottons
High Heat
Cottons High Heat
Knits/Delicates
Low Heat Cottons
High Heat
Cottons High Heat
Cottons High Heat
Fluff No Heat
Cottons High Heat
Permanent
Medium Heat
Hea[
icates
icates
Press
Automatic Regular Cycle or
Timed Cycle
Automatic
and
Timed
Automatic
and
Automatic
and Knits Cycle Automatic Perm Press
and Au[ornatic
Automatic Regular Cycle
Automatic Perm Press
and
Timed
Timed
Timed Cycle First setting—
Timed Cycle Set for time
Timed Cycle
Timed Cycle
Pcrm
Knits
Cycle
Cycle
Pcrrn Press
Knits
Cycle
Pcrm
Knits
Cycle
Regular Cycle
Knits Cycle
Cycle
Cycle
Press
Press
See
Dryness Selection
page 5. Set at REGULAR DAMP-DRY
Sce
Dryness Selection Guide page 5. DE-WRINKLE setting to de-wrinkle
garments that have not been washed.
See Dryness Selection Guide on page 5.
Set toward LESS DRY. Selection Guide on page 5.
toward
Set Selection Guide on
Set
Set at 20
For first setting, set at 20 minutes:
for
tidditional
First additional settings-–5 minutes.
First setting-20 minutes:
second
additional
LESS DRY. See Dryness
toward LESS DRY.
to 25 minutes.
second setting, set
settings—5 minutes.
desired.
scttitlg—20
setting —15 minutes;
sctt ings—5
fbr
ironing.
20
minutes;
minutes;
Guide on
for
dry; at
Sec
page 5.
tit 15 rn inutes
minutes
on
Dryness
Pillows—Feather and filled (if manufacturer recommends they be dried in a dryer). See Special Instructions.
*The terms High, Medium and Low Heat arc those usually found on
N~E:
The Cycle Selector settings indicated above arc to bc used as a
by setting the Cycle Selector to either side of the recommended settings.
Polyester-
Cottons High Heat
l~ibric
guide.
Tirncd
Cycle
care
ltibcls.
You may find
6
Set at 70 tn
For best results, follow your fabric cure labels.
that
best results
arc
obtained for certain of your fabrics
inutcs.
Page 7
Spcial
Do not dry non-colorfast items with whites or light-colored items
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops; place clotbes on hangers to minimize wrinkling.
Do minimize wrinkling.
Dry silks and wools in your dryer
Tumble drying is mandatory. Down must be thoroughly dried to remove odor and prevent mildewing. Place two large, dry towels in the dryer to improve tumbling and shorten drying time. Be sure to dry thoroughly.
IMPORTANT. If children’s Check manufacturer’s drying instructions.
Instructions
not
overload dryer; clothes should tumble
only
if recommended by the garment manufacturer. Follow instructions carefully.
sleepwear
is made of
freely. Remove promptly as soon as dryer stops, place clothes on hangers to
Modacrylic,
tumble dry only on Low/Knits. Normal Heat can damage these fabrics
See
above
instructions.
Place in dryer with 3 or 4 dry towels which have been heated for 5 minutes. Set timer for 20 to 25 minutes. Do not set control for more than
25 minutes. Do only one blanket at a time. Remove blanket at end of cycle and block blanket back to original shape. Press binding with warm
iron. Allow to dry before storing.
Use dry towels as buffers. Set timer for 20 minutes. If items are still wet, reset for 15 minutes and check again. Items should be removed while
still damp. Place slipcovers on furniture immediately. Hang draperies and curtains so that creases will filter for excess lint. Remove
Tumble on FLUFF (No Heat) setting as beat may cause alteration in shape, color and appearance of such articles,
Stop dryer periodically and check filter for excess
Speciafprecautions
again; and 5 minutes for each additional setting. Make sure that article does not fill drum. Many large articles, when wet, have ample room in dryer, but as they dry and fluff up may not have room to tumble. Check carefully every few minutes and if article is still wet or damp and fills dryer,
finisb
have room to tumble, be dried in home size dryers.
Check ticking for holes or weak seams where time. Stop dryer occasionally and
completely dry, return them to dryer and reset for more drying time. Feather pillows dry very slowly and must be dried completely to prevent
mildewing. DO
must be taken
drying on line. Do not, under any circumstances operate dryer for longer times
NQftumble
and
restart dryer.
for extra-large items. Set dryer
tbe
air flow may be blocked which
DO
N~tumble d~;ackefs
sbake
dr-vpillows cotltairring
featbers
pillows to redistribute filling for more even drying. Check pillows at end of drying time. If they are not
lint.
Remove and restart dryer
foi
20minufes
could
result in
containing Kapok. (See
or filling could escape. Dry no more than one pillow at a time and set dryer for maximum
ffipok.
scorcbing
fhen check
your valuable items. Many large items, like shag rugs, cannot
filter
carefilfy.
witbout
cleaning instructions above. )
fall
out. Stop dryer periodically and
Set
15
minutes for second setting, check
checking. CAUTION: If large items do not
cbeck
Refer to Garment Manufacturers’ Care
For more information on care labeling, send for “What’s New About CARE For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington,
bbels
LABELS:’
7
D.C.
20402
Page 8
How to sort the clothes
Norrndly,
you will also have properly sorted drying loads.
Sort by surface tetiure
if you have sorted clothes correctly for washing,
Sort by fabric
from
LINT PRODUCERS—such as terry toweling and chenille—give up lint. LINT
COLLE~RS—
such as man-made fibers and napped fabrics like velveteen and corduroy—attract lint, and must be dried separately.
from
from
from
Sort by color
from
:
3
Lights
3
1
\
,
m
)
3
Darks
1
,
3
\
,
m
from
-y
([
from
In addition to sorting to reduce lint collection, it is recommended that fabrics of similar construction be
dried together whenever possible.
..+:----
3
1
Non-
:,
Colorfast
)
i
.,
6
Sort by
Separate
wei@t
, Hea~ Items
(such as
J
towels)
!
m
. .
:
Light Items
(such as
curtains)
i
D
from
For information on tumble drying extra-large items and different fabrics and loads, see pages 6 and 7.
8
Page 9
How to load the clothes
Don’t overload your dryer. Crowded loads don’t
and
clothes
wrinkled. Loads should look
may
Cottons & Linens
dry
efficiently
be unnecessarily
~ike
this:
Drum with
Dru~ with
Permanent
Clean the lint filter before drying every load.
Clean lint filter (see shaded area)
by putting your moistened fingers at the corner of filter and wiping in a downward motion all the way across to the other corner.
Press Load
Lint Filter
For additional information on lint filter, see page 13.
Ene~y-Saving
Sort clothes by weight so you won’t have to run an extra cycle for one or two heavier, See page 8.
Do not overload dryer. For
efficient drying, clothes need to tumble freely.
Use Automatic
whenever possible overdying and to save energy.
slower-irying
DrvinE
t(;
heip
~ps
items.
Cycles
prevent
c
To help prevent ironing, use Perm Press, Medium Heat or Knits/
Delicates
garments promptly at end of drying cycle and place on hangers.
Dry your clothes in consecutive
loads.
save energy,
Low Heat. Remove
Using a “warm” dryer will
. Clean dryer lint filter each time you dry.
c
Clean dryer exhaust once a year. A partially clogged exhaust can lengthen drying time.
ducting
at least
9
Page 10
m
-~=
-
Questions?
UseThis Woblem
Solver
PROBLEM
DRYER WON’T START
CL~HES ~0
TAKE
LONG ~ DRY
POSSIBLE CAUSE AND REMEDY
Dryer unplugged. Make sure power cord is
. No power to dryer. Check fuses and circuit breakers to make sure dryer is getting current. Most electric dryers use two.
. Controls improperly set. Make sure controls are set and START switch is pushed. Opening the door during operation stops the dryer. Tore-start, close the door and push the START switch.
c
Dryer door is open. Close door securely—dryer will not run with door open.
Circuit is overloaded. Do not operate other appliances on the same electrical outlet
or circuit while the dryer is operating.
Controls improperly set. Check all controls to make sure they are correctly set for
the load you want to dry. See pages 4-7.
Clo~ed
under lint filter with vacuum cleaner. See page 13.
c
Improper ducting. Make sure dryer is
Instructions.
lint filter. Remove and clean filter before every load. Periodically clean area
plu~ed
ducted
in.
in accordance with Installation
SHMNKAGE,
GENERAL
Obstruction in exhaust ducting. Make sure ducting is clean and free of obstruction; make sure damper in outside wall cap operates easily. If flexible ducting is used, be sure it is not kinked and is properly installed according to Installation Instructions.
. Blown fuses or tripped circuit breakers. Check household fuses or circuit breakers. Most electric dryers use two. It is possible for one to be blown or tripped and the dryer still tumble without heat.
Improper sorting. Do not mix heavy, hard-to-dry items with lightweight articles.
Large loads of moisture-holding fabrics, such as beach towels, take a long time to remove moisture.
. Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
c
Too few items in dryer. If drying only one article, add two more similar articles, even
if dry, to insure proper tumbling.
Some fabrics will shrink whether machine washed and tumble dried or washed by hand and drip dried; others may be safely washed but will shrink in a dryer. Follow Garment Manufacturers’ Care Labels exactly. If in doubt, do not machine wash or tumble dry.
10
Page 11
PROBLEM
POSSIBLE CAUSE AND REMEDY
SHRINKAGE, KNITS
WRINKLING IN
PERMANENT PRESS AND “NO-IRON” ITEMS
. Rela~tion shrinkage
can occur in knit fabrics that have been improperly stretched and elongated by the manufacturer. When this occurs, garment maybe pressed back into shape after each wash and dry cycle.
Progressive or delayed shrinkage
is caused when starch or sizing (in some fabrics) is gradually removed by laundering. Maybe noticed in older garments that have been laundered many times without previous shrinkage.
Shrinkage caused by overheating
occurs in certain knit fabrics that have been
Tmt
as
tir Relmtion
Shrinkage
a~e.
heat-
shaped. When washing, drying or ironing temperatures exceed the temperatures used to shape set, shrinkage may occur. This cannot be corrected, but it can be prevented by washing in
cold
or warm water; drying on low heat.
. Leaving clothes in dryer after tumbling stops. Remove clothes promptly and hang them immediately.
Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
Too few items in dryer. If drying only one article, add two or more similar articles, even
if dry, to insure proper tumbling.
Improper loads. Avoid laundering heavy Permanent Press items, such as work clothes, with lighter Permanent Press items, such as shirts or blouses. Do not wash or dry Permanent Press with regular laundry.
Too many clothes in washer. Items must have room to move freely. Permanent Press loads should always be smaller than regular loads..
.no
more than medium loads.
. Use of incorrect wash and dry cycles. Use Permanent Press Wash Cycle which provides a cool-down rinse to minimize
Incorrect water level. Use large water level for medium load; medium level or half full
wrintiing.
Also, use Permanent Press Dry Cycle.
for small load.
Washing
reWatily
in too hot water. Wash in cool or warm
water with plenty of detergent.
11
Page 12
The Problem
Solver
(continued)
PROBLEM
WRINKLING IN PERMANENT PRESS
AND “NO-IRON”
ITEMS
(continuti)
POSSIBLE CAUSE AND REMEDY
. Accumulation of lime scale due to use of carbonate detergents. If you must use a non-phosphate detergent, avoid the use of a high-carbonate detergent.
c
Failure to use fabric softener. Proper use of fabric softener will minimize wrinkling.
To remove wrinkles:
Retumble
Rerinse and dry on “Permanent Press” setting.
If unsuccessful,
Iron carefully.
Send to dry cleaners for pressing.
Some
on “Permanent Press” setting.
wrirddes
*NOTE: Ifyou
out
wrin~ed, the
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or decrease of Permanent Press performance will result.
If you need more help.. call, toll free:
GE Answer Center”
8W.626.2~
consumer information service
retumble
may remain which cannot be removed!
follow
finish may
on high heat for 10-12 minutes and hang immediately.
good
laundry procedures and Permanent Press clothes
not
be good quality. Also, in permanent press synthetic/
still
come
12
Page 13
Care and Cleaning
USER MAINTENANCE INSTRUCTIONS
@od
dryer care
The Drum.
drum is rust-resistant no special care.
The Exterior.
washing compounds. Wipe or dust with damp cloth. the surface with sharp objects.
The Lint Filter.
before every use as described on page
9.
should be removed and suction hose from vacuum cleaner should be inserted into the opening. See below.
Porcelain enamel
and
requires
Wipe off any spills
Try
not to strike
Wipe lint
Periodically lint filter
filter
or
CAUTIONS:
Q
Before having your electric dryer
connected in your new residence,
be sure your licensed electrician
confirms that the supply voltage
matches the voltage specified on
the rating plate.
Dryer control panel and finishes
may be damaged by some laundry
pre-treatment
remover products if such products are sprayed on or have direct
contact with the dryer.
Apply these pre-treatment products away from the dryer. The fabric may then be washed and dried normally. Damage to your dryer
caused by pre-treatment products is
not covered by your warranty.
soil
and stain
Do not obstruct the combustion and ventilating air.
Dryer Exhaust:
the dryer exhaust ducting at least once a year.
To
store dryer:
time, disconnect power supply and clean lint filter.
Do not store dryer where it will be exposed to the weather.
flow
of
Inspect and clean
For short period of
13
Page 14
Noks
14
Page 15
Wdll
With ‘the purchase of your new GE appliance, receive
assurance that if you ever need information or
Be There
tie
assistice
from GE, we’ll be” there. Ml you have to do is cdl—toll-free!
In-Home
Repak
Service Contracts
GEAnswer Centera
Whatever your question about any GE major appliance, GE Answer information service is available to help. Your cdl—and your question— will be answered courteously And you can time. GE Answer open 24 hours a
prompdy and
Cente@
day
7 days a week.
Cente@
cdl
any
service is
Service
8m-GE-cAREs
AGE Consumer Service professional will provide expert repair service, scheduled at a time that’s convenient for you. Many GE Consumer Service company-operated locations offer you service today or tomorrow, or at your convenience
weekda~
days). Our know your appliance inside and so most repairs can be one visit.
(7:00
a.m. to
9:00
a.m. to
factory-tmined technicians
7:00
2:00
p.m. Satur-
handed
p.m.
out—
in just
800-626-~4
You can have GE Consumer Service will stall be
there after your warranty expires. Pur-
chase a GE ranty is still in effect and you’ll receive a substantial discount. With year contract, you’re assured of future service at today’s prices.
tie
secure feeling that
contmct
while your war-
a multiple-
Patis andAccessories
808-626-2082
hdividud qutiled
own appliances can
parts or accessories sent direcdy to their home, free of shipping charge! The GE to over 47,000 Genuine warranted. Discover cards are accepted.
contained in this
d-s
any user. Other servicing
shodd be referred to
vice personnel. Caution must be
exerciwd,
may
par~ system provides access
Reneti
WSA, Maste~ard and
User maintenance instructions
intended to be performed by
since improper
-use
unsafe operation.
to service their
have needed
par~.. and dl GE
Par~ are fully
bocddet
cover
genedy
qutiled
seticing
p~
ser-
Telecommunication
For Customers
Dtice
for the
Deti
Wtih
SpecialNeeds...
8fl~62E2000
Upon request, GE will provide controls for a variety of GE appliances, and a brochure to assist in planning a barrier-free kitchen for persons with limited mobility To obtain these free of charge,
Consumers with impaired hearing or speech who have access to a or a conventional teletypewriter may
cdl 800-TDD-GEAC
to request information or service.
cdl
800,626.2000.
(800-833-4322)
Braflle
item$
TDD
Page 16
YOUR GE AUTOMATIC CLOTHES DRYER
WARRANTY
Save proof of original purchase date such as your sales slip or
cancelled
check to establish warranty period,
WHAT IS COVERED
WHAT IS N~ COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original purchase, we will provide, free of
charge, parts and service labor
in your home to repair or replace
any
part of
because of a manufacturing
defect.
Service trips to your home to
teach you how to use the product.
Read your Use and Care material.
If you then have any questions about operating the product, please contact your dealer or our Consumer Affairs office at the address below, or call, toll free:
GE Answer
800.626.2000 consumer information service
Improper installation.
If you have an installation problem, contact your dealer or installer. You are responsible for providing adequate electrical, exhausting and other connecting facilities.
the
dryer
Center@
that fails
This warranty is extended to the original purchaser and any succeeding owner for products purchased for ordinary home use
in the 48 mainland states, Hawaii and Washington, warranty is the same except that it is LIMITED because you must pay to ship the product to the service shop or for the service technician’s travel costs to your home.
All warranty service will be provided by our Factory Service Centers or by our authorized Customer servicers during normal working hours.
Look in the White or Yellow Pages of your telephone directory for GENERAL ELECTR!C COMPANY, GENERAL ELECTRIC FACTORY SERVICE, GENERAL
HOTPOINT FACTORY SERVICE or
GENERAL ELECTRIC CUSTOMER CARE@ SERVICE.
. Replacement of house fuses or
resetting of circuit breakers.
Failure of the product if it is used
for other than its intended purpose or used commercially.
c
Damage to product caused by accident, fire, floods or acts of God.
WARRANTOR IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES.
D.C. In
ELECTRIC-
Alaska the
Care@
.4
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Part No. 113
Pub.
No.
5-90
CG
Some
states do not allow
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General,
D5497P150
49-9650
the exclusion or limitation of incidental or consequential damages, so the above limitation
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
or
exclusion
DDE6500G DDG6580G
Loading...