User Maintenance Instructions 13
WarrantyBack Cover
10-12
15
2-4
13
5
GEAmwer Centerm
80~626.2000
GEAppiances
Page 2
Help us
help
you...
Before using your dryer,
read this book carefully.
It is
intended to help you operate and
maintain your new dryer properly.
Keep it handy for answers
questions.
If you don’t understand something
or need more help, write (include
your phone number):
Consumer Affairs
GE Appliances
Appliance Park
Louisville,
KY40225
to your
If you received a
damaged dryer...
Immediately contact the dealer
(or builder) that sold you the
dryer.
Save time and money.
Before you request service . . .
check the Problem Solver on
pages 10-12. It
minor operating problems that
you can correct yourself.
lists
causes of
Write down the model
and serial numbers.
You’ll find them on a
front of the dryer behind the door.
These numbers are also on the
Consumer Product Ownership
Registration Card that came with
your dryer. Before sending in this
card, please write these numbers
here:
Model Number
Serial Number
Use these numbers in any
correspondence or service calls
concerning your dryer.
label
on the
To obtain a Spanish language
version of this book, call
GE Answer
800.626.2000
consumer information service.
Para
obtener la versi6n en
espafiol
name a
GE Answer
servicio
parael
te16fono
I
FOR YOUR SAFETY
Center@
de
este
manual,
Center?
de information
consumidor,
800.626.2000.
If you smell gas:
1. Open windows,
2. Don’t touch
electrical
switches:
3. Extinguish any
open flame.
4.
Immediately call
your gas supplier.
*Don’t turn electric switches
on or off because sparks may
ignite the gas.
I
FOR YOUR SAFETY
Do not store or use
gasoline or other
flammable
vapom
and
liquids in the vicinity
of this or any other
appliance.
SMETY
INSTRUCTIONS
Read all
before
appliance.
The California Safe Drinking
Water and Toxic Enforcement Act
requires the Governor of California
to publish a list of substances
known to the state to cause cancer
and requires businesses to warn
1
customers of potential exposure
to such substances.
Gas appliances can cause minor
exposure to three of these substances,
namely benzene, formaldehyde and
soot, caused primarily by the
incomplete combustion of natural
gas or LP fuels. Properly adjusted
dryers will minimize incomplete
combustion. Exposure to these
substances can be minimized
further by properly venting the
dryers to the outdoors.
W~IN&To
of fire, electric shock, or injury
to persons when using your
apptic~ fo~ow
including the following:
●
I
Use this appliance only for its
intended purpose
this Use and Care Book.
. This dryer must be properly
installed and located in
accordance with the Installation
Instructions before it is used.
you did not receive an Installation
Instructions sheet with your dryer,
you can obtain one by contacting
the service location nearest you.
—Woperly
with
all
ordinances. Follow details in
Installation Instructions.
imtructiom
mi~ thk
reduce the risk
basic
ground to conform
governing codes and
pmutiom,
as described in
If
All drying instruction terms in this book conform to the Care Labeling
Rule established by the Federal Trade Commission, January 1984.
2
Page 3
—bate
is above
where the temperature
50°F.
(10”C.) for
satisfactory operation of the dryer
control system. Do not instill or
store the dryer where it will be
exposed to the weather.
—Connect to a properly rated,
protected and sized power-supply
circuit to avoid electrical overload.
—Exhausting to the outside is
STRONGLY RECOMMENDED
to prevent large amounts of
moisture and lint from being blown
into the room. Carefully follow the
Exhausting Details in the Installation
Instructions.
●
When disconnecting this
appliance pull by the plug rather
than the cord to avoid damage to the
cord or junction of cord and plug.
Make sure that the cord is located so
that it
will
not be stepped on,
tripped over or otherwise subjected
to damage or stress.
Q
Do not repair or replace any
part of the appliance or attempt
any servicing unless specifically
recommended in this Use and
Care Book or in published
user-
repair instructions that you
understand and have the skills to
carry out.
To minimize the possibility
of a fire hazard.
Q
Do not use heat to dry articles
containing rubber, plastic, or
similar materials (such as padded
bras, tennis shoes, galoshes, bath
mats, rugs, bibs, baby pants, plastic
bags, etc.) as these materials may
melt or burn. Also, some rubber
hated,
materials, when
certiin
circumstances produce
fire by spontaneous combustion.
Q
Garments labeled “Dry Away
From Heat” (such as life jackets
containing Kapok) must not be put
in your dryer.
can under
c
Do not wash or dry articles
that have been cleaned in, washed
in, soaked in, or spotted with
combustible or explosive substances
(such as wax, paint, gasoline,
degreasers,
dry-cleaning solvents,
kerosene, etc.) which may ignite
or explode. Do not use or store
such substances on/or around
your washer and/or dryer during
operation.
c
Any article on which you have
used a cleaning solvent, or which
contains flammable materials
(such as cleaning cloths, mops,
towels used in beauty salons,
restaurants or barber shops, etc. )
must not be placed in or near the
dryer until all traces of these
flammable liquids or solids and
their fumes have been removed.
There are many highly flammable
items
used
in homes such as:
acetone, denatured alcohol,
gasoline, kerosene, some household
cleaners, some spot removers,
turpentines, waxes, wax removers
and products containing petroleum
distillates.
●
Clean the lint filter before each
load to prevent lint accumulation
inside the dryer or in the room.
NOT
DO
OPERATE THE
DRYER WITHOUT THE LINT
FILTER IN PLACE.
●
Keep area around and
underneath your appliance free
from the accumulation of
combustible materials, such as
lint, paper, rags, chemicals, etc.
●
Do not store items that may burn
or melt (such as clothing, paper
material, plastics or plastic
containers, etc. ) on top of the dryer
during operation.
●
The interior of the machine
and the exhaust duct connection
inside the dryer should be cleaned
periodically by a qualified
individual.
c
Exhaust duct (see installation
instructions). Use only
metil
duct
inside dryer or for exhausting
dryer to the outside.
To minimize the possibility
of injury.
s
Never reach into the dryer while
- -
the drum is moving. Before loading,
unloading or adding clothes, wait
until the drum has completely
stopped.
●
Close supervision is necessary
if this appliance is used by or near
children. Do not allow children to
play inside, on or with this
appliance or any discarded
appliance. Dispose of discarded
app~ance
and shipping or packing
materials properly. Before
discarding a dryer, or removing
from service, remove the door of
the drying compartment.
●
Keep all laundry aids (such
as detergents, bleaches, fabric
softeners, etc. ) out of the reach of
children, preferably in a locked
cabinet. Observe
container labels to avoid personal
injury.
● Keep the floor around your
appliances clean and dry to reduce
the possibility of slipping.
● Do not dry fiberglass articles in
your dryer. Skin irritation could
result from the remaining glass
particles that may be picked up
by clothing during subsequent
dryer uses.
Q
The laundry process can reduce
the flame retardancy of fabrics. To
avoid such a result, the garment
manufacturer’s care instructions
should be followed very carefully.
Q
Never climb on or stand on the
dryer top or door.
.
Do not tamper with controls.
●
To minimize the possibility
of electric shock, unplug this
appliance from the power supply
before attempting any maintenance
or cleaning (except the removal and
cleaning of the lint filter).
Turning the Cycle Selector knob
to an OFF position does NOT
disconnect the appliance from
the power supply.
all
warnings on
N~E:
3
Page 4
hportant
Safety
Itiructions
(continu~)
● Do not operate this appliance
if it is damaged, malfunctioning,
partially disassembled, or has
missing or broken parts, including
a damaged cord or plug.
●
If yours is a gas dryer, it is
equippd
with an automatic electric
ignition and does not have a pilot
light. DO
LIGHT WITH A
N~
ATTEMPT
MA~H.
~
Bums
may result from having your hand
in the vicinity of the burner when
the automatic ignition may turn on.
Dryer-applied fabric
softeners or anti-static
conditioners
You may wish to soften your
laundered fabrics or reduce the
static electricity in them. We
reeommend
fabric softener in the wash cycle,
according to the manufacturer’s
instructions for those products, or
try a dryer-added product for
which the manufacturer gives
written assurance on the package
you use either a
Service or performance problems
caused by the use of these products
are the responsibility of the
manufacturers of those products
and are not covered under the
warranty of this appliance.
SAW
THESE
INSTRUCTIONS
that their product can be safely
used in your dryer.
How to operate your dryer
WWING—TO
read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
reduce the risk of fire, electric shock, or injury to persons,
bad
Your Dryer
● Clean the lint filter each time the
~perly
dryer is used. Always be sure the
lint filter is in place. Don’t use the
dryer without it.
● Good sorting for the dryer begins
at the washer. Generally, if clothes
are sorted right for washing, they’re
sorted right for drying. See page 8
for sorting help. (If you do mix
various types of fabrics in your
load, set the controls for the
lighter-weight fabrics and remove
when dry. Reset controls for the
remaining heavier fabrics. )
Set the
Controh
See the Controls Setting Guide
on pages 6 and 7.
Ext.e Care
II
~
Fabric Care Selections
CVcoe
Ve.ieble Sig”el
II
Push a button to select the proper heat for your load.
Should be used with cycles indicsted ●
Fabric Care
Selections
Cottons
Hest
High
Perm Press
Medium Heat
KnitWDelicates
bw
Heat
Fluff
No Heat
@
Extra Care Cycle
Automatic
Regular Cycle
(Operates only with Automatic
Perm Press& Knits Cycle.)
●
Perm Press and
Knits Cycles
Use End-of-Cycle Signal. Signal
will sound at five-minute intervals
to remind you to remove the clothes.
Turn to ON if desired. To minimize
writies
set in the clothes, the Extra
Care cycle provides approximately
15 minutes of no-heat tumbling
after the clothes are dry.
Automatic,
●
●
Timed
Cycles
●
●
●
●
4
Page 5
@
Select End of Cycle Signal, if
desired. (See below.)
~
Turn Cycle Selector to desired
cycle setting. The selector may be
turned in either direction.
@
Press PUSH ~ START button
to start dryer. (Opening the door
during operation stops the dryer. To
re-start, close the door and press
the START button.)
Dryness selections guide for the automatic cycles
r
Set to
Middle
Position
Set
toward
MORE
Set
toward
LESS DRY
2X~ZZ:”c ,..:2:;’ “i’
cycle
<2.
.,.,
/
m.
(m
A“, omet#c ::.’ o,,
Reg”$..
cycle ,>,
DRY
,..:}~ ~
/
~:’ ~
(a
A“, oma,,c :::: ~,,
Regu,ev
. .c
C,cle
s:’”
.,,., *
/
w“
[m
\
\
● For most normal loads.
● For loads that include heavy
weight fabrics.
● If you desire to remove more moisture.
●
For lightweight fabric loads.
●
If you desire to remove less moisture.
●
For very small loads.
End-of-Cycle Signal
(Operates with any cycle.)
Variable Signal
OFF
@
The Signal control can be set
anywhere between OFF and
LOUD, depending on desired
sound level. The signal will sound
just before the end of the cycle to
remind you to remove the clothes.
To stop signal while sounding, turn
Signal control to OFF or advance
Cycle Selector to OFF.
The Signal should always be
when drying Polyester Knits or
Permanent Press items which
should be removed as soon as the
dryer stops to help prevent setting
of wrinkles.
The signal should also be used with
the Extra Care Cycle.
LOUD
used
Polyester Knits &
Permanent Press
drying tips
c
DO
N~ OVERLOAD—
Garments being dried or
dewrintied
Q
REMOVE
PROMPTLY-To help prevent
wrinHing, remove from the dryer
promptly at the end of the drying
cycles.
● PLACE ON
Permanent Press and Polyester
Knit garments look best if placed
on hangers after drying.
should tumble freely.
CL~HES
HANGERS—
What is the difference
between Automatic &
~med
Automatic Drying
When using the
cycles, the
system
temperature of the air in the dryer
drum. Wet laundry keeps this air
cool. When laundry is dry enough
(and the drum air warm enough)
the heat turns off. When the air
cools, the heat turns back on. This
off and on cycling may happen a
number of times (depending on the
fabric, load size, and Cycle
Selector setting). The Cycle
Selector advances (when the heat is
of~
dryer.
Timed Drying
When using the TIMED CYCLES,
you select the number of minutes
you wish the dryer to run and it
turns off at the end of this time
period.
drying?
AU~MATIC
Automtic
continually senses the
until it automatically turns off
Dry Control
5
Page 6
Controk
bad
Setting Guide for different fabrics and loads
Fabric Care/
Drying Selection*
Cycle
Cycle Setting
Cottons & Linens
T
Permanent Press, Treated Cottons,
Blends with Cotton
Synthetics—Polyester, Nylon,
Acrylic Knits and Woven Fabrics
Sturdy
Delicate
Silks
and Wools, Blends including
Silks and Wools
Rayon and Acetate
Down-filled garments, if machine
washing and drying are
recommended.
Baby Clothes—Sturdy: Diapers,
Nightgowns, Shirts, Pads, Sheets,
Receiving Blankets, Coveralls. See
Special Instructions.
Baby Clothes—Delicate
Blankets-Wool, Part
Cotton, Electric, Synthetic. See
below under “Extra-large
Curtains, Slipcovers, Draperies.
DO N~ MACHINE DRY
FIBERGLASS.
Chenille Bedspreads, Robes. See
below under “Extra-large
Rubber-coated Items,
Fabrics, Vinyl, Plastics and
Articles with Plastic Trim.
See Dryness Selection Guide on page 5.
Use Extra Care Cycle if
DE-WWNKLE setting to
garments that have not been washed.
See Dryness Selection Guide on page 5.
Use Extra Care Cycle if desired.
Set toward LESS DRY. See Dryness
Selection Guide on page 5.
Set toward LESS DRY. See Dryness
Selection Guide on page 5.
See Dryness Selection Guide on page 5.
See Dryness Selection Guide on page 5.
See Dryness Selection Guide on page 5.
Set at 20 to 25 minutes.
For first setting, set at 20 minutes;
for second setting, set at 15 minutes.
First setting—20 minutes;
additional settings-5 minutes.
Set for time desired.
First setting—20 minutes;
additional settings—5 minutes.
First setting—20 minutes;
second setting—15 minutes;
additional settings—5 minutes.
desird.
de-wrin~e
Pillows—Feather and
filld
(if manufacturer recommends
they be dried in a dryer). See
Special Instructions.
Vhe
terms High, Medium and Low Heat are those usually found on fabric care labels. For best results,
N~E:
The Cycle Selector settings indicated above are to be used as a guide. You may find that best
by setting the
Cycle
Polyester-
Selector to either side of the recommend settings.
Cottons
High Heat
Timed Cycle
6
Set at 70 minutes.
follow
your fabric care labels
resulk
are obtained for certain of your fabrics
Page 7
S~ial
Do not dry non-colorfast items with whites or light-colored items.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops; place clothes on hangers to
minimize wrinkling.
Instructions
Do not overload dryer; clothes
minimize wrinkling.
Dry silks and wools in your dryer
Tumble drying is mandatory. Down must be thoroughly dried to remove odor and prevent mildewing. Place two large, dry towels in the
dryer to improve tumbling and shorten drying time. Be sure to dry thoroughly.
IMPORTANT. If children’s
Check manufacturer’s drying instructions.
See above instructions.
Place in dryer with 3 or 4 dry towels which have been heated for 5 minutes. Set timer for 20 to 25 minutes. Do not set control for more than
25 minutes. Do only one blanket at a time. Remove blanket at end of
iron.
Allow
to dry before storing.
Use dry
still
filter for excess lint. Remove and restart dryer.
towels
damp. Place slipcovers on furniture immediately. Hang draperies and curtains so that creases will fall out. Stop dryer periodically and check
as buffers. Set timer for 20 minutes. If items are
should tumble freely. Remove promptly as soon as dryer stops, place clothes on hangers to
only
if recommended by the garment manufacturer.
sleepwear is made of
Modacrylic,
tumble dry only on Low Heat. High Heat can damage these fabrics.
cycle and block blanket back to original shape. Press binding with warm
still
wet, reset for 15 minutes and check again. Items
Follow
instructions carefully.
should
be removal while
~mble
on FLUFF (No Heat) setting as heat may cause alteration in shape, color and appearance of such articles.
Stop dryer periodically and check
Specialprecautions must be taken for extra-large items. Set dryer for 20minutes then check carefilly Set E minutes for second setting, check
again; and 5 minutes for each additional setting. Make sure that article does not
dryer, but as they dry and fluff up may not have room to tumble. Check carefully every few minutes and if article is
dryer, finish drying on
have room to tumble, the air flow maybe
be dried in home size dryers. DO
Check ticking for holes or weak seams where feathers or filling
time. Stop dryer occasionally and shake pillows to redistribute
completely dry, return them to dryer and reset for more drying time. Feather pillows dry very slowly and must be dried completely to prevent
mildewitr~.
Refer to
For more information on care labeling, send for “What’s New About CARE
For
DO
Gament
sale by the Superintendent of DocumetrE, U.S. Government Printing Office, Washington,
line.
N~tumble dw
Manufacturers’ Care
filter for excess
Do not, under any circumstances operate dryer for longer times without checking. CAUTION: If large items do not
blockd
N~tumbledryjackets
~illows containing
lint.
Remove and restart dryer.
fill
drum. Many large articles, when wet, have ample room in
which
could
result in scorching your valuable items. Many large items, like shag rugs, cannot
containing ffipok. (See filter cleaning instructions above.)
could
escape.
filling for more even drying. Check pillows at end of drying time. If they are not
ffipok.
Dry no more than one pillow at a time and set dryer for maximum
still
wet or damp and
fills
hbels
LABELS:’
D.C.
20402.
7
Page 8
How to
Normally, if you have sorted clothes correctly for washing,
you will also have properly sorted drying loads.
soti
the clothes
-
+
Sort by surface tetiure
Separa
from
LINT PRODUCERS—such as
terry toweling and chenille—give
up lint. LINT
such as man-made fibers and
napped fabrics like velveteen and
corduroy—attract lint, and must be
dried separately.
COLLE~RS—
Sort by fabric
from
from
w
from
~Delicates#
Sort by color
from
from
from
In addition to sorting to reduce lint
collection, it is recommended that
fabrics of similar construction be
dried together whenever possible.
Sort by
For information on tumble drying
extra-large items and different
fabrics and loads, see pages 6 and 7.
we@t
from
8
Page 9
How to load the
clothes
Don’t overload your dryer,
Crowded loads don’t dry efficiently
and clothes may be unnecessarily
wrin~ed.
Loads
should look like this:
Drum with
Cottons & Linens
Drum with
Permanent Press Load
dryiW
every load.
Clean lint filter (see shaded area)
by putting your moistened fingers
at the corner of filter
md
wiping in
a downward motion all the way
across to the other corner.
For additional information on lint
filter, see page 13.
Ene~y-Savi~~ps
●
Sort clothes by weight so you won’t
have to run an extra cycle for one or
two heavier, slower-drying items.
See page 8.
● Do not overload dryer. For
efficient drying, clothes need to
tumble freely.
● Use Automatic Drying Cycles
whenever possible to help prevent
overdying and to save energy.
●
To help prevent ironing, use
Perm
Press Medium Heat or
Knits/Delicates
Low Heat. Remove
garments promptly at end of drying
cycle and place on hangers.
●
Dry your clothes in consecutive
loads. Using a “warm” dryer will
save energy.
● Clean dryer lint filter each time
YOU
dry.
●
Cl-
dryer efiaust
ducting
at
l~t
once a year. A partially clogged
exhaust can lengthen drying time.
non-phosphate detergent, avoid the use of a high-carbonate detergent,
AND “NO-IRON”
ITEMS (continued)
●
Failure to use fabric softener. Proper use of fabric softener will minimize
~
●
Retumble
●
Rerinse and
●
Ifunsuccessfil,~tumble on
●
Iron carefully.
●
Send to dry cleaners for pressing.
●
Some
*N~:
out wrintied, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
If you need more help.. call,
GE Answer
Center@
toll
8W.62&2~
consumer information service
remme -es:
on “Permanent Press” setting.
dry on “Permanent Press” setting.
wrirddes
If you
free:
WMEDY
scale due to use of carbonate detergents. If you must use a
high heat for 10-12 minuks
may remain which cannot be
follow
good
laundry procedures and Permanent press
removed!
wrinUing.
and hang immediately.
CIOtheS Still come
Page 13
Care and
Cleati~
USER
~STRUC~ONS
God
The Drum. Porcelain enamel
drum is rust-resistant and requires
no special care.
The Exterior. Wipe off any spills or
washing compounds. Wipe or dust
with damp cloth. Try not to strike
the surface with sharp objects.
The Lint Filter. Wipe lint filter
before every use as described on
page 9. Periodically lint filter
should be removed and suction
hose from vacuum cleaner should
be inserted into the opening.
See below.
~EN~CE
dryer care
To store dryer for a short period of
time, disconnect power supply and
clean lint filter.
Do not store dryer where it will be
exposed to the weather.
CAUTIONS:
●
Before having your electric dryer
connected
be sure your licensed electrician
confirms that the supply voltage
matches the voltage specified on
the rating plate.
. Dryer control panel and finishes
may be damaged by some laundry
pre-treatment soil and stain remover
products if such products are
sprayed on or have direct contact
with the dryer.
Apply these pre-treatment products
away from the dryer. The fabric
may then be washed and dried
normally. Damage to your dryer
caused by pre-treatment products
is not covered by your warranty.
in your new residence,
BEFORE REPLACING LIGHT
BULB, BE SURE
THE DRYER POWER CORD.
Unscrew the bulb and replace it
with the same type 10 watt bulb.
TO
UNPLUG
Do not obstruct the flow of
combustion and ventilating air. The
air intake is located on rear of dryer.
Dryer Exhaust: Inspect and clean
ducting
the dryer exhaust
once a year.
at least
U3fminmum
Make sure there is at least 3”
clearance from rear dryer louvers
to the wall.
13
Page 14
Noks
14
Page 15
If You Need Service
To
obmin
service, see your warranty
on the back page of this
We’re proud of our service
want you to be pleased. If for some
reason you are not happy with the
service you receive,
steps to follow for further help.
FIRST, contact the people who
serviced your appliance. Explain
why you are not pleased. In most
cases, this will solve the problem.
NEXT, if you are still not pleased,
write all the details-including
your phone number—to:
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, Kentucky
FINALLY, if your problem is still
not resolved, write:
Major Appliance
Consumer Action Panel
20 North
Chicago, Illinois 60606
Wacker
book,
and
here are three
40225
Drive
Page 16
YOUR GENERAL ELECTRIC AUTOMATIC CLOTHES DRYER
WARRAN~
Save
proof of original purchase date such as your sales slip or
cancelled
check to establish warranty period.
WHAT IS COVERED
WHAT IS
N~
COVERED ●
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor
in your home to repair or replace
any
pati of
because of a manufacturing
defect.
Se~icetriPstoYour
teach you how to use the product.
Read your Use and Care material.
If you then have any questions
about operating the product,
please contact your dealer or our
Consumer Affairs office at the
address below, or call, toll free:
GE Answer
800.626.2000
consumer information service
● Improper installation.
If you have an installation problem,
contact your dealer or installer.
You are responsible for providing
adequate electrical, exhausting
and other connecting facilities.
the
dryer
Center@
that fails
hometo
This warranty is extended to
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the 48 mainland states, Hawaii
and Washington,
warranty is the same except that it
is LIMITED because you must pay to
ship the product to the service shop
or for the service technician’s travel
costs to your home.
All warranty service will be provided
by our Factory Service Centers or
by our authorized Customer Care”
servicers during normal working
hours.
Look in the White or Yellow Pages
of your telephone directory for
GENERAL ELECTRIC COMPANY,
GENERAL ELECTRIC FACTORY
SERVICE, GENERAL
HOTPOINT
GENERAL ELECTRIC CUSTOMER
CARE@ SERVICE.
. Replacement of house fuses or
resetting of circuit breakers.
. Failure of the product if it is used
for other than its intended purpose
or used commercially.
● Damage to product caused
by accident, fire, floods or acts
of God.
WARRAN~R
FOR CONSEQUENTIAL DAMAGES.
D.C.
In Alaska the
ELECTRIC-
FACTORY SERVICE or
IS
NOT
RESPONSIBLE
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs office or your state’s Attorney General.
Pati
No.
113D
5497
Pub. No. 49-9640
10-89
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
P137
DDE8107M
DDG8187M
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.