or need more help, write (include
your phone number)
and
maintain your
for
answers to
you don’t understand something
Consumer Affairs
GE Appliances, Appliance Park
Louisville, KY 40225
To obtain a Spanish language
version of this book, call
GE Answer Center”GE Answer
800.626.2000”information
consumer information service.
WA~ING:
For your safety the information in this manual must be followed to minimize
Save time and money.
Before you request service . . .
check the Problem Solver
section. It lists causes of minor
operating problems that you can
correct yourself.
If you received a
damaged dryer...
Immediately contact the dealer (or
builder) that sold you the dryer.
Para
espafiol
te16fono
obtener
la
versi6n
de
este
manual, name a
Center@, servicio
para el consumidor,
800.626.2000.
en
de
Write down the model
and serial numbers.
You’ll find them on a label on the
front of the dryer behind the door.
These numbers are also on the
Consumer Product Ownership
Registration Card that came
with your dryer. Before sending
in this card, please write these
numbers here:
Model Number
Serial Number
Use these numbers in any
correspondence or service
calls
concerning your dryer.
the risk of fire or explosion or to prevent property damage, personal injury or loss of life.
●
—Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
—WHAT TO DO IF YOU SMELL GAS
●
Do not try to light any appliance.
●
Do
not touch any electrical switch;
do not use any phone in your building.
bmediately
neighbor’s phone. Follow the gas supplier’s
imtructions.
●
If you cannot reach your gas supplier,
call the
—Instigation and service must be performed
by a qualified installer, service agency or
the gas supplier.
●
Clear the room, building or area of
all
occupanti.
All drying instruction terms in this book conform to the Care
Labeling Rule established by the Federal Trade Commission, January 1984.
If you need service
To obtain service, see the
Consumer Services page
in the back of this book.
We’re proud of our service and
want you to be pleased. If for some
reason you are not happy with the
service you receive, here are three
steps to follow for further help.
First, contact the people who
serviced your appliance. Explain
why you are not pleased. In most
cases, this will solve the problem.
NEXT, if you are still not pleased,
write all the details—including
your phone number—to:
Manager, Consumer Relations
GE Appliances, Appliance Park
Louisville, KY 40225
call your gas supplier from a
fire
department.
FINALLY, if your problem
is still not resolved, write:
Major Appliance Consumer
Action Panel
20 North
Chicago,
Wacker
IL
60606
Drive
2
Page 3
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic
Enforcement Act requires the governor of
California to publish a list of substances known
to
the
state to cause cancer, birth defects or other
reproductive harm and requires businesses to warn
customers of potential exposure to such substances.
Gas appliances can cause minor exposure
to four of these substances, namely benzene,
carbon monoxide, formaldehyde and soot,
caused primarily by the incomplete combustion
of natural gas or
Properly adjusted dryers will minimize incomplete
combustion. Exposure to these substances can be
minimized further by properly venting the dryers
to the outdoors.
Warning—To reduce the risk of fire,
A
electric
when using your appliance, follow basic
precautions, including the following:
●
Use this appliance only for its intended
purpose as described in this Use and Care Book.
●
This dryer must be properly
4,
‘Q.,+<
~
y=~b ,, :?
a
installed and located in accordance
with the Installation Instructions
before it is used.
Installation Instructions sheet with your
dryer, you can obtain one by calling,
free, the GE Answer Center”, 800.626.2000.
—Properly ground to conform with
all.governing
Follow details in Installation Instructions.
—Locate where the temperature is above
(lO°C.)
for satisfactory operation of the dryer
control system. Do not install or store the
dryer where it
—Connect to a properly rated, protected
and sized power supply circuit to avoid
electrical overload.
—Exhausting to the outside is STRONGLY
RECOMMENDED
of moisture and lint from being blown into the
room. Carefully follow the Exhausting Details
in the Installation Instructions.
LP
fuels.
shock, or injury to persons
If you did not receive an
toll
codes and ordinances.
will
be exposed to the weather.
to
prevent large amounts
50°F.
●
Do
not repair or replace any
part of the appliance or attempt
any servicing unless specifically
recommended in this Use and Care Book or
in published user-repair instructions that you
understand and have the skills to carry out.
~
●
When disconnecting this appliance
~
%2
pull by the
@
4
to avoid damage to the cord or junction
plug
rather than the cord
of cord and plug. Make sure that the cord is
located so that it will not be stepped on, tripped
over or otherwise subjected to damage or stress.
To Minimize the Possibility
of a Fire
●
Exhaust
Use only rigid metal or flexible metal 4“
diameter ductwork inside the dryer cabinet
or for exhausting to the outside. USE OF
PLASTIC OR OTHER COMBUSTIBLE
DUCTWORK CAN CAUSE A FIRE. FOIL OR
OTHER EASILY PUNCTURED DUCTWORK
CAN CAUSE A FIRE IF IT COLLAPSES OR
BECOMES OTHERWISE RESTRICTED IN
USE OR DURING INSTALLATION.
●
Do not use heat to dry articles containing rubber,
plastic, or similar materials (such as padded
bras, tennis shoes, galoshes, bath mats, rugs, bibs,
baby pants, plastic bags, etc.) as these materials
may melt or burn. Also, some rubber materials,
when heated, can under certain circumstances
produce fire by spontaneous combustion.
●
Do not store items that may burn or melt
(such as clothing, paper material, plastics
or plastic containers, etc.) on top of the dryer
during the operation.
~zard
Duct+ee
Installation Instructions.
(continued next page)
3
Page 4
‘1
●
J
●
Garments labeled “Dry Away from Heat”
(such as life jackets containing Kapok)
must not be put in your dryer.
\~’t, •:::::::::~c::;;:~;:tted
A
substances (such as wax, paint, gasoline,
degreasers,
etc.) which may ignite or explode. Do not add
these substances to the wash water. Do not use
these substances around your washer and/or
dryer during operation.
●
Any article on which you have used a cleaning
solvent, or which contains flammable materials
(such as cleaning cloths, mops, towels used in
beauty salons, restaurants or barber shops, etc.)
must not be placed in or near the dryer until
traces of these flammable liquids or solids and
their fumes have been removed. There are many
highly flammable items used in homes such as:
acetone, denatured alcohol, gasoline, kerosene,
some household cleaners, some spot removers,
turpentines, waxes, wax removers and products
containing petroleum distillates.
WORTANT
was ● ,
with combustible or
dry-cleaning solvents, kerosene,
.
~xplosive
SAFETY
9
all
(continued)
~STRUCTIONS
To Minimize the Possibility of Injury
●
Never reach into the dryer while the
drum is moving. Before loading, unloading
or adding clothes, wait until the drum has
completely stopped.
●
Do not dry fiberglass articles in your dryer.
Skin irritation could
glass particles that may be picked up by clothing
during subsequent dryer uses.
The laundry process can reduce
the
To avoid such a result, the garment
manufacturer’s care instructions
should be followed very carefully.
●
Close supervision is necessary
>
/.
@
appliance. Dispose
shipping or packing materials properly. Before
discarding a dryer, or removing from service,
remove the door of the dryer compartment.
if this appliance is used by or
near children. Do not
children to play inside, on, or
with this appliance or
result
from the remaining
flame retardancy
o~discarded
of fabrics.
allow
any
discarded
appliances and
.
Clean
the lint filter before each load to prevent
lint accumulation inside the dryer or in the
room. DO NOT OPERATE THE DRYER
WITHOUT THE LINT FILTER IN PLACE.
●
Keep the area around and underneath
your appliances free from the accumulation
of combustible materials, such as lint, paper,
rags, chemicals, etc.
●
The interior of the machine and the exhaust
duct connection inside the dryer should be
cleaned periodically by a qualified individual.
●
Keep all laundry aids (such as
lC
.
m
T
m
container labels to avoid personal injury.
●
Keep the floor around your appliances clean
and dry to reduce the possibility of slipping.
J
9
maintenance or cleaning (except the removal and
cleaning of the lint filter).
/’
$%
/-
●
Do not tamper with the controls.
detergents, bleaches, fabric
softeners, etc.) out of the reach
of children, preferably in a locked
cabinet. Observe all warnings on
●
To minimize the possibility of electric
shock, unplug this appliance from the
power supply before attempting any
NOTE: Turning the Cycle Selector
\ “
knob to an OFF position does NOT
disconnect the appliance from the
power supply.
4
Page 5
●
Do not operate this appliance if it is damaged,
malfunctioning, partially disassembled, or has
missing or broken parts, including a damaged
cord or plug.
●
Never climb on or stand on the dryer top.
●
If yours is a gas dryer, it is equipped with an
automatic electric ignition and does not have
a pilot light. DO NOT ATTEMPT TO LIGHT
WITH A MATCH. Burns may result from having
your hand in the vicinity of the burner when the
automatic ignition may turn on.
Dryer-applied Fabric Softeners or
Anti-static Conditioners
You may wish to soften your laundered
fabrics or reduce the static electricity in them.
We recommend you use either a fabric softener
in the wash cycle, according to the manufacturer’s
instructions for those products, or try a dryer-added
product for which the manufacturer gives written
assurance on the package that their product can be
safely used in your dryer.
Service or performance problems caused by
the use of these products are the responsibility
of the manufacturers of those products and are
not covered under the warranty of this appliance.
SAVE T~SE
~STRUCTIONS
● Sort clothes by weight so you won ‘t have to run
or two heavier, slower-drying items.
● Do not overload your dryer. For efficient drying, clothes need
to tumble freely.
● To help prevent ironing, use
garments promptly at end
● Dry your clothes in consecutive loads. Using a “warm” dryer
will save energy.
● Clean the dryer lint filter each time you dry.
● Clean the dryer exhaust
exhaust can lengthen drying time.
Perm.
Press (Medium Heat). Remove
of drying cycle and place on hangers.
ducting
at least once a year. A partially clogged
an
extra cycle
for
one
5
Page 6
HOW TO
OPEMTE
YOUR DRYER
WARNING—TO
persons when using your appliance, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
I
reduce
the risk of fire, electric shock, or injury to
Check the Lint Filter
Clean the lint filter each time the dryer is used. Always be sure the lint filter
is in place. Don’t use the dryer without it. See Care and Cleaning Section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if clothes
sorted right for washing, they’re sorted right for drying. See the How to
Sort the Clothes section. If you do mix various types of fabrics in your load,
set the controls for the lighter-weight fabrics and remove when dry. Reset
controls for the remaining heavier fabrics.
are
I
Heaq OuVLaWe Capac,V
–e
Set the Controls
See the Controls Setting Guide.
@
O
Drying Selections.
Select the proper heat
your
load.
for
Polyester Knits & Permanent Press Drying Tips
“
DO NOT OVERLOAD—
Garments being dried or
dewrinkled should tumble freely.
Cycle Selector.
Turn the Cycle Selector to
the desired
selector may be turned in
either direction.
● REMOVE CLOTHES
PROMPTLY—To
wrinkling, remove clothes from
the dryer promptly at the end of
the drying cycles.
cycle
setting. The
help prevent
~
Start Button.
Pres:,
the Push to Start
buttcn
to start the dryer.
(Opening the door during
operiltion
To restart, close the door and
press the Push to Start button.)
“ PLACII
Permunent
knit garments look best if
on hangers after drying.
stops the dryer.
ON HANGERS—
press
and
polyester
placed
6
Page 7
Sort by Surface Texture
‘eparate
Sort by Fabric
efromm
LINT PRODUCERS—such as terry toweling and
chenille—give up lint.
LINT COLLECTORS—such as man-made fibers and
napped fabrics like velveteen and corduroy—attract
lint. These must be dried separately.
Separate
Sort by Color
Sort by Weight
Separate
In addition
sorting to reduce
lint collection, we
recommend that you
wash fabrics of similar
construction together
whenever possible.
For information on tumble drying extra
items and different fabrics and loads, see the
Controls Setting Guide.
large
to
HOW TO LOAD THE CLOTHES
Don’t overload your dryer.
Crowded loads don’t dry
efficiently and clothes may
be unnecessarily wrinkled.
Loads should look like this:
Cottons & Linens
Drum with
/
Drum with
Permanent Press Load
7
Page 8
CONTROLS SETTING GUIDE
Load
Cottons & Linens
Blends with Cotton
Synthetics—Polyester, Nylon,
Acrylic Knits and Woven Fabrics
Sturdy
Delicate
Silks and
including Silks and Wools
Rayon and Acetate
Down-filled garments,
if machine washing and drying
are recommended.
Baby Clothes—Sturdy: Diapers,
Nightgowns, Shirts, Pads, Sheets,
Receiving Blankets, Coveralls.
See Special Instructions.
Baby Clothes—Delicate
Blankets—Wool, Part Wool,
Cotton, Electric, Synthetic. See
below under “Extra-large Items.”
Regular Cycle40 to 50 minutes setting for average-weight loads;
Perm Press & Knits
Perm Press & Knits
&
Knits
Regular Cycle
Regular Cycle
Perm Press & KnitsDelicate setting
Regular Cycle
Regular Cycle
Regular Cycle
Regular Cycle
Regular Cycle
Regular Cycle
Cycle Setting
50 to 60 minutes setting for work clothes
knitted cottons. Use Damp Dry setting for ready-to
iron light weight cottons (20 minutes); for medium
weight (25 minutes); for heavy cottons
Use DeWrinkle setting to take wrinkles out
garments that have not been washed.
Normal settingPermanent Press, Treated Cottons,
Normal setting
Normal setting
Delicate setting
Delicate settingPerm Press
40 to 50 minutes
40 to 45 minutes
20 to 25 minutes.
For first setting, set at 20
for second setting, set at 15 minutes.
First setting—20 minutes;
additional settings—5 minutes.
Set for time desired.
First setting—20 minutes;
additional settings—5 minutes.
First setting—20 minutes;
second setting—1 5 minutes;
additional settings—5 minutes.
minutes:.
and
(30
minutes).
of
thick
Pillows—Feather and
filled (if manufacturer recommends
they be dried in a dryer). See
Special Instructions.
*The terms High, Medium
NOTE: The Cycle Selector settings indicated above are to be used as a guide.
You may find that best results are obtained by setting the Cycle Selector to either side of the recommended settings
Polyester-
and
Low Heat are those usually found on fabric care labels. For best results, follow your fabric care labels.
Normal
Regular Cycle
I 30 minutes.
8
Page 9
—
Special Instructions
Do not dry
non-colorfast items with whites or light-colored items.
—
Do not overload
minimize wrinkling.
Do not overload dryer; clothes should tumble freely. Remove promptly as soon as dryer stops, place clothes on hangers to
minimize wrinkling.
Dry silks and wools in your dryer only if recommended by the garment manufacturer. Follow instructions carefully.
Tumble drying is mandatory, Down must be thoroughly dried to remove odor and prevent mildewing. Place two large, dry towels in the
dryer to improve tumbling
IMPORTANT. If children’s
fabrics. Check
Scc
~bove
Place
in dryer with 3 or 4 dry towels which have been heated
25
minutes. DO only
warm iron. AI1ow to dry before storing,
Use
dry towels as buffers. Set timer
still damp. Place slipcovers on furniture immediately, Hang draperies and curtains so that creases will fall out. Stop dryer periodically and
check filter for excess I
dryer;
clothes should tumble freely. Remove promptly as soon as dryer stops; place clothes on hangers to
and
shorten drying time. Be sure to dry thoroughly.
manufacturers drying instructions.
instructions.
one
sleepwear is made of
blanket at a time, Remove blanket at end of cycle and block blanket back to original shape. Press binding with
for 20
int.
Remove
and
Modacrylic,
minutes. If items are still wet, reset for 15 minutes and check again. Items should be removed while
restart
drver,
tumble dry only on Low/Knits temperature. Normal Heat can damage these
for
5 minutes. Set timer for 20 to 25 minutes. Do not set control for more than
Tumble dry on No Heat setting as heat may cause alteration in shape, color and appearance of such articles.
Stop dryer periodically and check filter for excess lint. Remove and restart dryer
SpC,(/cI/ prc,c~~uf;{~~~,j
again:
and 5
dryer. but as they dry and
dryer.
finish
have room 10 tumble, the air flow
cannot be
Check ticking for holes or weak seams where feathers or filling could escape. Dry no more than one pillow at a time and set dryer for
maximum
If they
completely to prevent mildewing.
dried in home
time.
are
not completely dry, return them to dryer and reset for more drying time. Feather pillows dry very slowly and must be dried
must bc taken to dry extra-large items.
rninutcs
for each additional setting. Make sure that article does not fill drum. Many large articles, when wet, have ample room in
drying on line. Do not, under any circumstances operate dryer for longer times without checking. CAUTION: If large items do not
Stop dryer occasionally and shake pillows to redistribute filling for more even drying. Check pillows at end of drying time
fluff up may not have room to tumble. Check carefully every few minutes and if article is still wet or damp and fills
may
be blocked which could rcsuh in scorching your valuable items. Many large items, like shag rugs,
size
dryers.
[)0
NOT
fumb/e cir},;a(kef,}
[~0 NOT tumble
Set
cirv pi[low.v
dt:}er,fi]r 20 minufe.sthen check [arefi//},. Set 15 minutes for second setting, check
c~~ntc~inin<q Kclpok.
cotltuinirrgKapok.
(See filter cleaning instructions above. )
Refer to Garment Manufacturers’ Care Labels
For more information on care labeling, send for “What’s New About CARE LABELS.”
For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington,
D.C. 20402,
9
Page 10
CAm Am CLEAN~G
User Maintenance Instructions
CAUTION: If yours is an electric dryer, before you have it connected
in your new residence, be
the supply voltage matches the voltage specified on the rating plate.
Dryer Exterior
sure your licensed electrician confirms that
Wipe off any spills or washing
compounds. Wipe or dust with
a damp cloth. Try not to strike
the surface with sharp objects.
Dryer Drum
The porcelain enamel drum
is rust-resistant and requires
no special care.
Lint Filter
Before every dryer
use, clean the lint
filter. Put your
moistened fingers
at the corner of the
filter and wipe in a
downward motion
all the way across
to the other corner.
Dryer control
finishes may be damaged by
some laundry pretreatment soil
and stain remover products ifnormally. Damage to your dryer
such products are sprayed on orcaused by pretreatment products
have direct contact with the dryer.is not covered by your warranty.
Dryer Exhaust
Inspect and clean the dryer
exhaust
panel
andApply these pretreatment products
ducting
at least once a year.
Periodically,
remove the lint
filter and insert
the suction hose
from your vacuum
cleaner into
the opening.
away from the dryer. The
may then be washed and dried
fabric
Dryer Storage
To store your dryer
short period of time, disconnect
the power supply
lint filter.
for a
and
clean the
Air Circulation
Do not obstruct the flow of
combustion and ventilating air,
10
Page 11
PROBLEM
POSSIBLE CAUSE
DRYER WON’T START
CLOTHES TAKE TOO
LONG TO DRY
● Dryer unplugged. Make sure power cord is plugged in.
● No power
to
dryer. Check fuses
and
circuit breakers to make sure dryer is
getting current. Most electric dryers use two.
● Controls improperly set. Make sure controls
are
set
and
Start button is pushed.
Opening the door during operation stops the dryer. To restart, close the door
and push the Start button.
● Dryer door is open. Close door securely—dryer
● Circuit is overloaded. Do not operate other appliances on the same electrical
outlet or circuit
● Controls improperly set. Check
while
the dryer is operating.
all
controls to make sure they are correctly
set for the load you want to dry. See the How to Operate Your
● Clogged
area under lint filer with
● Improper ducting. Make sure dryer is
1 int
filter. Remove and clean filter before every load. Periodically clean
vacuum
cleaner. See the Care and Cleaning section.
ducted
wi 11
not run with door open.
Dryer section.
in accordance with the
Installation Instructions.
● Obstruction in exhaust ducting. Make sure ducting is clean and free of
obstruction; make sure damper in outside wall cap operates easily. If flexible
ducting is used, be sure it is not kinked and is properly installed according to the
Installation Instructions.
● Blown fuses or tripped circuit breakers. Check household fuses or circuit
breakers. Most electric dryers use two. It is possible for one to be
blown
or
tripped and the dryer still tumble without heat.
● Improper sorting. Do not mix heavy, hard-to dry items with lightweight articles.
“
Large loads of moisture-holding fabrics, such as beach towels, take a long
time to remove moisture.
Q
Too many items in dryer. Dry only one washer load at a time. Do not combine
loads.
● Too
few
items in dryer. If drying only one article,
add
two more similar articles,
even if dry, to insure proper tumbling.
SHRINKAGE. GENERAL
● Some fabrics will shrink whether machine washed and tumble dried
or
washed by hand and drip dried; others may be safely washed but will shrink
in a dryer. Follow Garment Manufacturers’ Care
Labels
exactly. If in doubt,
do not machine wash or tumble dry.
11
Page 12
THE PROBLEM SOLVER
(continued)
PROBLEM
SHRINKAGE, KNITS
WRINKLING IN
PERMANENT PRESS
AND “NO-IRON” ITEMS
I
POSSIBLE CAUSE
●
Relaxation shrinkage can occur in knit fabrics that
have been improperly
stretched and elongated by the manufacturer. When this occurs, garment may
be pressed back into shape after each wash and dry cycle.
● Progressive or delayed shrinkage is caused when starch or sizing (in some
fabrics) is gradually removed by laundering. Maybe noticed in older garments
that have been laundered many times without previous shrinkage. Treat as for
Relaxation Shrinkage above.
● Shrinkage caused by overheating occurs in certain knit fabrics that have
been heat-shaped. When washing, drying or ironing temperatures exceed the
temperatures used to shape set, shrinkage may occur. This cannot be corrected,
but it can be prevented by washing in cold or warm water; drying on low heat.
●
Leaving clothes in dryer after tumbling stops. Remove clothes promptly and
hang them immediately.
●
Too many items in dryer. Dry only one washer load at a time. Do not
combine loads.
Too few items in dryer. If drying only one article, add two or more similar
articles, even if dry, to insure proper tumbling.
Improper loads. Avoid laundering heavy Permanent Press items, such as work
clothes, with lighter Permanent Press items, such as shirts or blouses. do not
wash or dry Permanent Press with regular laundry.
Too many clothes in washer. Items must have room to move freely.
Permanent Press loads should always be smaller than regular loads . . .
no more than medium loads.
Use of incorrect wash and dry cycles. Use Permanent Press wash cycle
which provides a cool-down rinse to minimize wrinkling. Also, use Permanent
Press drying cycle.
Incorrect water level. Use large water level for medium load; medium level
or half full for small load.
Washing repeatedly in too hot water. Wash in cool or warm water with
plenty of detergent.
Accumulation of lime scale due to use of carbonate detergents. If you must
use a non-phosphate detergent, avoid the use of a high-carbonate detergent.
Failure to use fabric softener.
Pro~er
use of fabric softener will
L
minimize wrinkling.
12
Page 13
PROBLEM
POSSIBLE CAUSE
WRINKLING IN
PERMANENT PRESS AND
“NO-IRON ITEMS”
(continued)
TO REMOVE WRINKLES:
●
Retumble
●
Rerinse
● If unsuccessful,
and hang immediately.
● Iron carefully.
● Send to Dry Cleaners for pressing.
● Some wrinkles may remain which cannot be removed. *
* NOTE: If you follow good laundry procedures and Permanent Press
clothes still come out wrinkled, the finish may not be good quality. Also, in
permanent press synthetic/cotton blends, the cotton portion of the fabric can
eventuality wear away leaving only the synthetic. Since its the cotton portion
which is treated for Permanent Press, a loss or decrease of Permanent Press
performance will result.
If you need more help.. call, toll free:
GE Answer Center”
800.626.2000
consumer information service
on Permanent Press setting.
and dry on Permanent Press setting.
retumble
on normal temperature for 10–12 minutes
13
Page 14
NOTES
14
Page 15
Wdll
Be There
With the purchase of your new GE appliance, receive the
assurance that if you ever need information or
assis~nce
from GE, we’ll be there. Al you have to do is cdl—toll-free!
In-Home
Repak
Servjce
800-GE-CARES
(800-432-273fl
A
(lkl
Consumer Service professional
will provide expert repair
scheduled at
fc)r
you. Many GE
a
time that’s convenient
[;onsurner
company-operated locations offer
service today or tomorrow, or at your
convenience
weekdays,
days).
know your appliance inside and out—
so most repairs
one visit.
Our
(7:00
9:()()
a.m. to
factory
can
a.m. to 7:00 p.m.
trdined
be handled in just
se~wice,
Service
2:00
p.m. Satur-
technicians
you
Servjce
Contracts
8f10-626-P24
You can have the secure feeling that
GE Consumer Service will still be
there after your warranty expires. Purchase a GE contract while your warranty is still in effect and you’ll receive
a substitiat discount.
year contract, you’re assured of fiture
service at today’s prices.
Witi
a
multiple-
GEAnswer
Center
a
80~626.2f100
Whatever your question about any
major appliance, GE Answer Cente@
information service is available to
help. Your cdl—and your question—
will be answered
courteously And
time. GE Answer
open 24 hours a
Telecommunication
prompdy and
you
can
cdl
Cente@
day
Device for
service is
7 days a week.
the Deaf
any
GE
Pam andAcce=orjes
800-626-2002
Individu& qudfied
o-
appliances can have needed
par~s
or accessories sent directly to
their home. The GE
vides
access to over 47,000 parts... and
all
GE Genuine Renewal
fully warranted. VISA, MasterCard
and Discover cards are accepted.
User maintenance instructions
contined
dures intended to be
any user.
shodd
vice personnel. Caution must be
exercised, since improper servicing
may
in this
Other
be referred to
cawe unsafe operation.
to service their
par~ system pro-
ParLs
booMet
servicing
cover proce-
perfomed
qutified
are
by
gener~y
ser-
-— —
. . . . ..,
,.-. —. ..- - ..-—... . . ,
For Customers
---”- -.
Wjth
SpecjalMeeds...
80~6262000
Upon request, GE will provide Braille
controls for a variety of GE
and a brochure to assist in planning a
barrier-free kitchen for persons with
limited mobility To obtain these items,
free of charge,
Consumers with impaired hearing
or speech who have access to a
or a conventional teletypewriter may
cdl 800-TDD-GEAC
to request information or service.
cdl
800.626.2000.
(800-833-4322)
appliaces,
TDD
I
Page 16
YOUR GE AUTOMATIC CLOTHES DRYER
WARRANTY
Save proof of original purchase date such as your sales slip or cancelled check to establlsh warranty period
WHAT IS COVERED
-.-”
WHAT IS NOT COVERED
FULL ONE-YEAR WARRANTY
For one year from date of original
purchase, we will provide, free of
charge, parts and service labor in
your home to repair or replace
any
pati
of
the
dryer that fails
because of a manufacturing
defect.
● Sewice trips to your home to
teach you how to use the product.
Read your Use and Care material.
If you then have any questions
about operating the product, please
contact your dealer or our Consumer
Affairs office
or call, toll free:
GE Answer Center
800.626.2000
consumer information service
● Improper installation.
If you have an installation
problem, contact your dealer
or installer. You are responsible
for providing adequate electrical,
exhausting and other connecting
facilities.
at
the address
(’]
below,
This warranty is extended to
the original purchaser and any
succeeding owner for products
purchased for ordinary home use
in the 48 mainland states, Hawaii
and Washington,
D.C.
In Alaska the
warranty is the same except that it
is LIMITED because you must pay
to ship the product to the service
shop or for the service technician’s
travel costs to your home.
All warranty service will be
provided by our Factory
Sewice
Centers or by our authorized
Carec
Customer
servicers during
normal working hours.
Should your appliance need
service, during warranty period
or beyond, call 800-GE-CARES
(800-432-2737).
● Replacement of house fuses or
resetting of circuit breakers.
● Failure of the product if it is used
for other than its intended
purpose or used commercially.
● Damage to product caused
by accident, fire, floods or acts
of God.
WARRANTOR IS NOT
RESPONSIBLE FOR
CONSEQUENTIAL DAMAGES.
I
Some
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion
To know what your legal rights are in
I
I
This
book is printed on recycled paper,
Part No. 113D5497P222
Pub
No.
49-9702
6-92
CG
Manager—Consumer Affairs, GE Appliances, Louisville, KY 40225
your state, consult
your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company
If further help is needed concerning this warranty, write:
vay
from state to state.
DDE5900R
DDG5980R
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.