GE CTC912P2NS1 Specification Sheet

Café™ 30" Combination Double Wall Oven with Convection and Advantium® Technology
CTC912P2NS1
FEATURES
Configuration Double Oven
Advantium Cooking Modes Cooking System True European Convection (Lower) Oven Cleaning Type Self-Clean with Steam Clean Option (Lower) Style Built-In Cleaning Time Variable with Delay Clean Option (Lower) Program Cooking Over 175 Programmed Menu Selections
Oven Cooking Modes Self-Clean Oven Door Lock Automatic (Lower) Baking/Speed Cook Pan Porcelain (Upper) Control Type Dial; Glass Touch Oven Features 10-Pass Bake Element; 8-Pass Broil Element
Oven Rack Features
Product Type
Oven Control Features Microwave Sensor Cooking Controls Cook; Defrost; Express; Reheat Microwave Watts (IEC-705) 1000.0
FEATURES & BENEFITS
Unmatched versatility to unleash your imagination - Enjoy a whole new level of cooking flexibility with a single oven that can be used in five dierent ways. Use it as a Convection Oven, Microwave, Toaster Oven, Warming/Proofing Oven, and Precision Cook Oven with Advantium Technology (upper oven).
Healthy meals without the fuss - Fresh vegetables and rice are perfectly prepared with a steam cook option that simplifies the entire process (upper oven)
The perfect bake is now perfectly easy - Achieve unrivaled performance with the only system that delivers top-down true convection for consistent results on special occasion favorites like roasts, chicken, turkey and more (lower oven)
The oven rack that handles it all - Easily remove heavy dishes with a roller rack that is specially designed to glide smoothly and stay in the oven during the self-clean cycle, so you never have to handle cumbersome racks again (lower oven)
The perfect fit you’ve always dreamed of - When you’re updating your kitchen, attention to detail is a priority. That’s why Café wall ovens are guaranteed for an exact fit or Café Appliances will pay up to $300 toward modifications.
APPEARANCE
Color Appearance Stainless Steel Handle Brushed Stainless Handle Design Café Pro Installation Above Warming Drawer
Power Levels 10 Turntable Size 16.0 Cooking Technology Advantium Fuel Type Electric
Oven Interior
CAPACITY
Capacity (Cu. Ft.) 1.7 Upper / 5.0 Lower
POWER / RATINGS
Amp Rating at 208V 30 Amp Rating at 240V 30 Bake Wattage 2850W Broiler Wattage 3400W Convection Wattage 2400W Electrical Input - 120V Amperage 15 Electrical Input - 120V Watts 1800 KW Rating at 208V 5.4 KW Rating at 240V 7.2
WEIGHTS & DIMENSIONS
Approximate Shipping Weight 235 Net Weight 215 Overall Height 43 3/8 Overall Width 29 3/4 Overall Depth 26 3/4 Cabinet Width 30 Cutout Dimensions (w x h x d) (in.) 28-5/8 x 42-1/4 x 23-1/2 Oven Interior Dimensions (lower) 25 x 17-3/8 x 20-1/4 Oven Interior Dimensions (upper) 20-1/16 x 8-1/2 x 17
ACCESSORIES
Cookbook Yes (Advantium)
Convection Bake (Upper); Microwave (Upper); Proof (Upper); Speedcook (Upper); Warm (Upper)
Convection Bake (Lower); Convection Bake Multi/Single Rack; (Lower); Convection Broil (Lower); Convection Roast (Lower)
1 Self-Clean Heavy-Duty Roller Rack; 2 Self-Clean Heavy-Duty Oven Racks; 6 Ladder-Rack Positions (Lower)
Double Oven; Microwave Oven Combination
Audible Preheat Signal; Auto Recipe Conversion; Certified Sabbath Mode; Control Lock Capability; C° or F° Programmable; Defrost Mode; Delay Clean Option; Delay Start; Electronic Clock & Kitchen Timer (Lower); Hi / Low Broil; Proof Mode; Temperature Probe; Warm Mode
1 Halogen Interior Oven Light (Upper); 2 Halogen Interior Oven Lights (Lower); Hidden Bake
Café™ 30" Combination Double Wall Oven
B
30 ''
A
C
CUTOUT WIDTH
28-1/2" MIN.
28-5/8" MAX.
Recommended
minimum cutout location from the floor
21-5/8"
24"
E
F
D
CUTOUT HEIGHT
42-3/16" MIN. 42-1/4" MAX.
23" MIN.
door opening allowance
CONDUIT
48"
9-1/2" MAX. RIGHT SIDE ONLY
CUTOUT DEPTH 23-1/2" MIN.
28" MIN. to
bottom of junction box
Junction box location (Junction box may be located in adjacent cabinet)
2 x 4 or equivalent runners level with bottom of cutout
and flush with sides of cutout or solid bottom floor.
B
30 ''
A
C
CUTOUT WIDTH
28-1/2" MIN.
28-5/8" MAX.
Recommended
minimum cutout location from the floor
21-5/8"
24"
E
F
D
CUTOUT HEIGHT
42-3/16" MIN. 42-1/4" MAX.
23" MIN.
door opening allowance
CONDUIT
48"
CABINET 30"
A –Overlap of oven at top of cutout 1" BOverlap of oven over side of edges of cutout 3/4" C –Overlap of oven at bottom of cutout 1" OVEN D –Install depth 23-1/2" E –Overall height with trim 42-3/8" F –Overall width 29-3/4"
CT9800 PT9800 PT7800 JT3800
ATTENTION INSTALLER: All electric wall ovens must be hard-wired (direct-wired)
into an approved junction box. A plug and receptacle is NOT permitted on these products.
NOTE: If the cabinet does not have a solid bottom, two braces or runners must be installed to support the weight of the oven. For single ovens, the runners and braces must support 200 lbs (91 kg). For double ovens, the runners and braces must support 375 lbs. (170 kg).
NOTE: If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or opening are covered.
NOTE: If the cabinet does not have a front frame and the sides are less than 3/4" (1.9 cm) thick, shim both sides equally to establish the cutout width.
9-1/2" MAX. RIGHT SIDE ONLY
CUTOUT DEPTH 23-1/2" MIN.
28" MIN. to
bottom of junction box
Junction box location (Junction box may be located in adjacent cabinet)
B
30 ''
A
C
CUTOUT WIDTH
28-1/2" MIN.
28-5/8" MAX.
Recommended
minimum cutout location from the floor
21-5/8"
CUTOUT HEIGHT
42-3/16" MIN. 42-1/4" MAX.
9-1/2" MAX. RIGHT SIDE ONLY
CUTOUT DEPTH 23-1/2" MIN.
28" MIN. to
bottom of junction box
Junction box location (Junction box may be located in adjacent cabinet)
with Convection and Advantium® Technology
CTC912P2NS1
WARRANTY
Parts warranty Limited 1-year entire appliance Labor warranty Limited 1-year entire appliance Warranty notes See written warranty for full details
DIMENSIONS AND INSTALLATION INFORMATION
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.
Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
Note:
These ovens are not approved for stackable or side-
by-side installations.
ATTENTION INSTALLER: All electric wall ovens must be hard-wired (direct-wired)
into an approved junction box. A plug and receptacle is NOT permitted on these products.
NOTE: If the cabinet does not have a solid bottom, two braces or runners must be installed to support the weight of the oven. For single ovens, the runners and braces must support 200 lbs (91 kg). For double ovens, the runners and braces must support 375 lbs. (170 kg).
NOTE: If marks, blemishes or the cutout opening are visible above the installed oven, it may be necessary to add wood shims under the runners and front trim until the marks or opening are covered.
NOTE: If the cabinet does not have a front frame and the sides are less than 3/4" (1.9 cm) thick, shim both sides equally to establish the cutout width.
CT9800 PT9800 PT7800
CABINET 30"
A –Overlap of oven at top of cutout 1" B – Overlap of oven over side of edges of cutout 3/4" C –Overlap of oven at bottom of cutout 1" OVEN D –Install depth 23-1/2" E –Overall height with trim 42-3/8" F –Overall width 29-3/4"
JT3800
B
ADDITIONAL ACCESSORIES
For answers to your Café™ product questions, visit our website at cafeappliances.com.
CUTOUT WIDTH
28-1/2" MIN.
28-5/8" MAX.
30 ''
A
C
CXWD0H0PMBZ
Brushed Bronze
2 handles
CUTOUT HEIGHT
42-3/16" MIN. 42-1/4" MAX.
Recommended
minimum cutout location from the floor
21-5/8"
Brushed Stainless
Suitable
bracing
to support
runners
(must support 275 lbs.)
CXWD0H0PMSS
2 handles
C
L
CXWD0H0PMBT
Brushed Black
2 handles
CXWD0H0PMCU
Brushed Copper
2 handles
© 2020 GE Appliances PC 94017 01/20
Loading...