GE CT959STSS User Manual

CT959ST

GE Café™ Series 30" Built-In Double Convection Wall Oven

Dimensions and Installation Information (in inches)

KW Rating

240V

208V

Breaker Size

240V

208V

Most 30” Wall Cabinets can be used with this unit.

Note: These ovens are not approved for stackable installations. Cabinets installed

adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.

Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.

Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.

Installation Information: Before installing, consult

installation instructions packed with product for current dimensional data.

7.6

5.7

40 Amps

For answers to your Monogram® or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000.

Dimension and installation information are shown in inches.

Listed by Underwriters Laboratories

Specification Revised 3/13

220229

CT959ST

GE Café™ Series 30" Built-In Double Convection Wall Oven

Features and Benefits

• Glass touch controls - Smooth controls are easy to use and add a sophisticated style to the kitchen

• True European Convection with Precise Air (both ovens) - A reversing fan circulates heat and air for evenly browned and baked foods

• Convection Bake - This setting is optimal for baking casseroles or lasagnas, yeast breads, pies and pizzas with no need to turn the pan

• Convection Roast - Optimal for larger cuts of meat, this setting rotates the heat around all sides, sealing in the juices, producing rotisserie results at up to 25% faster than a conventional oven

• Heavy-duty roller racks - Racks provide easy access to items inside the oven by simplifying loading and unloading

• Black gloss oven interior - Black oven interior adds a stylish touch to any kitchen

• Model CT959STSS – Stainless steel

Specification Revised 3/13

220229