Ge CT9050EK User Manual

F
E
21
"
Conduit
48-1/2"
Cutout depth 23-1/2" MIN
B
A
C
Cutout width 28-1/2" MIN.
28-5/8" MAX.
Recommended cutout location
from oor
32-1/2"
Cutout height 27-1/4" MIN. 27-5/16" MAX.
22" minimum door opening allowance
22" to bottom of junction box
Junction box location
9-1/2"
MAX.
D
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or equivalent runners level with bottom of cutout
and ush with sides of cutout or solid bottom oor.
F
E
21
"
Conduit
48-1/2"
Cutout depth 23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1-1/4" B – Overlap of oven over side of edges of cutout 3/4" C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2" E – Overall height with trim 28-5/8" F – Overall width 29-3/4"
CT9050
B
30''
A
C
Cutout width 28-1/2" MIN.
28-5/8" MAX.
Recommended cutout location
from oor
32-1/2"
Cutout height 27-1/4" MIN. 27-5/16" MAX.
22" minimum door opening allowance
22" to bottom of junction box
Junction box location
9-1/2"
MAX.
D
Cutout depth 23-1/2" MIN
Cabinet 30"
A – Overlap of oven at top of cutout 1-1/4" B – Overlap of oven over side of edges of cutout 3/4" C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Install depth 23-1/2" E – Overall height with trim 28-5/8" F – Overall width 29-3/4"
CT9050
B
30''
A
C
Cutout width 28-1/2" MIN.
28-5/8" MAX.
Recommended cutout location
from oor
32-1/2"
Cutout height 27-1/4" MIN. 27-5/16" MAX.
22" to bottom of junction box
Junction box location
MAX.
B
30''
A
C
Cutout width 28-1/2" MIN.
28-5/8" MAX.
Recommended cutout location
from oor
32-1/2"
Cutout height 27-1/4" MIN. 27-5/16" MAX.
CT9050EK
GE Cafe™ Series 30 in. Built-In Single Convection Wall Oven
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
MOST 30" WALL CABINETS CAN BE USED WITH THIS UNIT.
NOTE: These ovens are not approved for
stackable installations. Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating.
Door handle protrudes 2-1/2" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions.
INSTALLATION I N FORMATI O N : Before installing, consult installation instructions packed with product for current dimensional data.
Side-by-side installations rerquire at least 2" between cutouts.
KW R ATING
240V 4.5
208V 3.4
BREAKER SIZE
240V 20 Amps
208V 20 Amps
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
CT9050
ADA
COMPLIANT
Listed by Underwriters Laboratories
Speci fication Created 6/16
Side by Side single ovens
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
Cutout - observe all dimensions and requirements.
Cutout - observe all dimensions and requirements.
Center Line
30" models
2
" MIN.
27" models
Side by Side single ovens
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
Cutout - observe all dimensions and requirements.
Cutout - observe all dimensions and requirements.
Center Line
30" models
2
" MIN.
27" models
Side by Side single ovens under cooktop and counter
Side by Side single ovens
25
Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.
Gas or electric connections for gas cooktop must be located in an adjacent accessible location to the right
240V / 208V Junction box location
36" Typical countertop height
24
4
"
Allow 1-1/4" top/bottom and 1" on sides for overlap
28 1/2" MIN. 28 5/8" MAX.
9-1/2"
27 1/4" MIN. 27 5/16" MAX.
3/4" Support platform required
Must Support 200 Lbs.
22" MIN. Above support platform
Side by Side single ovens
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
Cutout - observe all dimensions and requirements.
Cutout - observe all dimensions and requirements.
Center Line
30" models
2
" MIN.
27" models
Side by Side single ovens under cooktop and counter
Side-by-Side Installations
Install two ovens in separate cutouts.
Cooktop
Center LineCenter Line
NOTE: One cooktop may be centered over either oven in the side-by-side istallation.
Cutout - observe all dimensions and requirements.
Cutout - observe all dimensions and requirements.
30" models
2
" MIN.
27" models
CT9050EK
GE Cafe™ Series 30 in. Built-In Single Convection Wall Oven
OPTIONAL UNDERCOUNTER DIMENSIONS AND INSTALLATION INFORMATION
NOTE: 36" ribbon cooktop are approved for use over GE 30" single wall ovens and warming drawers. 30" ribbon cooktops are approved for use over 30" and GE 27" single wall ovens and warming drawers. Refer to cooktop and wall oven installation information packed with products for current dimensional data.
NOTE: Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle.
Installation information: Before installing, consult installation instructions packed with products for current dimensional data and for alternate installation options.
ELECTRIC WALL OVENS ARE NOT APPROVED FOR INSTALLATION WITH A PLUG AND RECEPTACLE. THEY MUST BE HARD WIRED IN ACCORDANCE WITH INSTALLATION INSTRUCTIONS.
SIDE BY SIDE SINGLE OVENS UNDER COOKTOP AND COUNTER
Side-by-Side Installations
Install two ovens in separate cutouts.
30" models
27" models
Cooktop
Cutout - observe all dimensions and requirements.
NOTE: One cooktop may be centered over either oven in the side-by-side istallation.
Center LineCenter Line
Cutout - observe all dimensions and requirements.
2
" MIN.
Dimension and installation information are shown in inches.
SIDE BY SIDE SINGLE OVENS
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
Cutout ­observe all dimensions and requirements.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Center Line
30" models
27" models
Cutout ­observe all dimensions and requirements.
2
" MIN.
Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.
25
28 1/2" MIN. 28 5/8" MAX.
27 1/4" MIN. 27 5/16" MAX.
3/4" Support platform required
Must Support 200 Lbs.
3-1/4
3-1/2" MIN. Free space
30" built-in
oven
3/4" Support
4"
1/2" Black
iron pipe
Pressure regulator
Union
Shut-off
valve
Conduit
40"
Right cabinet side
Side View
240V / 208V Junction box location
Allow 1-1/4" top/bottom and 1" on sides for overlap
Gas or electric connections for gas cooktop must be located in an adjacent accessible location to the right
9-1/2"
22" MIN. Above support platform
24
"
4
2 (two) 90°elbows & sufficient pipe to connect in adjacent cabinet
Junction box for oven
Junction box in adjacent cabinet for cooktop hook-up
22
Power cord for cooktop
Speci fication Created 6/16
36" Typical countertop height
Loading...
+ 1 hidden pages