GE BL Installation Guide

GE

Installation Guide

Lighting

LuminationTM LED Luminaires

(BL Series - Pendant Mount Option)

BEFORE YOU BEGIN

Read these instructions completely and carefully.

WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK

• Turn power off before inspection, installation or removal.

• Properly ground electrical enclosure.

RISK OF FIRE

• Follow all NEC and local codes.

• Use only UL approved wire for input/output connections.
Minimum size 14 AWG, rated minimum 300V.

RISQUES DE DÉCHARGES ÉLECTRIQUES

• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.

• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.

RISQUES D’INCENDIE

• Respectez tous les codes NEC et codes locaux.

• N’utilisez que des ls approuvés par UL pour les entrées/sorties de

connexion. Taille minimum 14 AWG.

Save These Instructions

Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

Prepare Electrical Wiring Important

Refer the BL Series Lumination LED Luminaires Installation
Guide provided with luminaire for luminaire electrical

connections details. See wiring diagram for reference.

Electrical Requirements

The LED luminaire must be connected to the mains
supply according to its ratings on the luminaire
product label.

Grounding Instructions

The grounding and bonding of the overall system
shall be done in accordance to local electric code
of the country where the luminaire is installed.

• Intended for new installlations only. Not meant to convert an
existing BL Series recessed luminaire already mounted in the
ceiling into a surface mount pendant.

• Only to be used with BL Series luminaire purchased separately,
which includes BL Series Lumination LED Luminaires
Installation Guide instructions.

Required Components Based on Safety Standard

• UL Listed conduit connections and ttings per NEC/CEC for
nominal conduit trade size 1/2”.

• UL Listed twist-on wire connectors.

• Use min. 600V 75°C supply conductor.

• Follow local building codes and safety regulations.

Components Supplied

Part Number Description Quantity

BRA-00096-01 BL Pendant Mount Bracket 2

SCW-00015-01 M4-0.7X8 PPOZI TRS Z 4

imagination at work

Ceiling Mounting Method Options

Black

AC

White
Green/Yellow

Grey
Violet
Violet/White

Black/White

Blue/White

Yellow

Line
Neutral
Ground

1-10V(-)

1-10V(+) DALI/PROG.

DALI/PROG.

LED Driver

Remote

Switch

(Optional)

Use mounting options that are appropriate for use with your mounting surface and weight of the xture.

CAUTION

OPTION 1

OPTION 2

Mount to Building Structure

Description:

Mount xture directly to building structural

member such as:

• Bar joists, strut, purlins, beams roof trusses, etc.

Equipment Required (not supplied):

• 1/4”-20 or M6 threaded rod

• Contact supplier for other options

Mount to Ceiling Canopy

Description:

Mount xture to ceiling canopies (not supplied).

Equipment Required (not supplied):

• Suspension cable

• Single-feed Canopy Kit (67654)

• Contact supplier for other options

Wiring Diagram

NOTE:

• Use appropriate connectors to make
connections in accordance to local electric
code of the country where the luminaire is
installed as described in BL Series Lumination
LED Luminaires Installation Guide instructions
provided with the luminaire.

• UL Listed conduit connections and ttings per

NEC/CEC.

• When connecting to (optional) switch, run wires
from controller or dimmer through a different
knockout than the AC input wire. Follow lighting
controller installation instructions.